Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing optical fiber cable blowing machine hire begins with understanding the work the equipment must perform. A short installation programme can still involve demanding duct routes, delicate cable constructions and restricted access at the launch point. Before comparing equipment options, establish the cable diameter, duct internal diameter, intended installation lengths and available working space. These details help determine whether a proposed machine can accommodate the cable correctly and provide a practical arrangement for the crew. Fibernet, founded in Italy in 2001, develops cable blowing equipment with a background rooted in practical installation experience. Its first cable blowing machine, Lady, was introduced in 2021. For contractors assessing temporary equipment requirements, contacting the manufacturer provides an opportunity to discuss compatibility and ask which supply arrangements are currently available, rather than assuming that every model is offered for hire. A useful enquiry should describe the actual installation conditions. Include the number of duct sections, changes of direction, elevation differences and any known concerns about duct integrity. State whether the ducts are newly installed or have already been used, and explain how their condition will be checked before work begins. Cable characteristics matter equally: the outer sheath, stiffness and manufacturer’s handling limits influence how the cable should be fed and controlled. When selecting a cable blowing machine for fiber optic cable installation, matching these factors is more useful than choosing solely by advertised distance or speed. Results depend on the complete installation arrangement, not the machine alone. Air supply also deserves early attention. If the proposed configuration requires compressed air, ask for the specified pressure, flow and air quality requirements, then verify that the available compressor can meet them under working conditions. Check the suitability of connecting hoses and fittings, and establish which accessories are included in any proposal. A quotation that separates the machine, cable guides, duct connections and other necessary components makes comparisons clearer. For customers considering fiber cable blowing machine hire, the same preparation helps prevent an apparently economical arrangement from becoming costly through missing equipment or unsuitable interfaces. Fibernet’s Italian manufacturing background is relevant to businesses seeking a direct technical conversation about its equipment, whether they operate in Italy or manage projects internationally. Provide the project location, required dates and expected workload when making contact. Ask about availability, delivery arrangements, documentation and the scope of any assistance before committing. The objective is a workable equipment plan supported by confirmed information, with the machine selected around the installation rather than the installation forced around whatever happens to be available.
A productive cable blowing operation depends on preparation at the launch point as much as on the equipment selected. Positioning must allow the cable to approach the machine without excessive bending, while leaving room for the operator to monitor feeding and respond safely. The cable drum needs a suitable support arrangement and controlled rotation so that resistance does not build up before the cable enters the machine. Duct connections should be accessible for inspection, and the working area should remain clear of unnecessary obstructions. When discussing optical fiber cable blowing machine hire, describe these practical constraints alongside the cable and duct dimensions. They can affect which configuration is appropriate and what additional equipment the contractor must arrange. Before starting, the crew should verify duct continuity, cleanliness and suitability using the procedures specified for the project. Damaged connections, accumulated debris or unexpected restrictions can undermine an otherwise appropriate equipment choice. Any lubricant must be compatible with the cable sheath and duct material and used in accordance with relevant guidance. The machine itself requires checks based on its operating instructions: correct guides, suitable gripping components, secure connections and correctly configured controls. Do not assume that settings from a previous installation are suitable for a different cable. Feeding force, speed and air settings must remain within the applicable limits, with adjustments made by competent personnel following the equipment documentation. If a compressed air optical fiber cable blowing machine is being considered, assess the compressor as part of the package rather than as a separate procurement detail. Confirm the required supply characteristics, connection sizes and any air treatment requirements with the supplier. Where an electric optical fiber cable blowing machine is under consideration, clarify the electrical supply requirements and the role of compressed air in that specific configuration. Electrical drive does not, by itself, establish that compressed air is unnecessary. These distinctions matter when planning site power, transport and supporting equipment. During installation, the operator should monitor changes in cable movement and machine behaviour rather than focusing only on progress. Unexpected resistance calls for investigation, not an automatic increase in force. Establish communication between personnel handling the drum, operating the machine and observing the receiving end where applicable. Agree on stopping procedures before work begins, and keep people away from pressurised connections and moving components in accordance with the operating instructions. Fibernet can be contacted with these operational requirements to discuss its equipment and confirm the information available for the proposed application. For international projects, request clarification of documentation language, delivery responsibilities and any project-specific requirements early. A clearly defined package gives the contractor a stronger basis for organising the crew and assessing whether the proposed arrangement fits the job.
The financial case for optical fiber cable blowing machine hire changes with workload, scheduling certainty and the contractor’s existing equipment. A business handling occasional installations may value temporary access because it avoids committing capital to equipment that could stand idle between projects. A contractor with regular blowing work may instead find that ownership provides greater control over availability and machine configuration. Neither approach is automatically better. Compare them using a realistic forecast of working days, likely interruptions and the number of projects that can use the same equipment. Include mobilisation and return time where relevant, rather than considering only the days when cable is actually being installed. When reviewing an optical fiber cable blowing machine rental proposal, ask for written clarification of the charging period, included accessories, transport responsibilities and any deposit or insurance requirements. Establish how breakdowns, accidental damage, cleaning and late returns would be handled. These are questions to verify with the provider, not terms to assume. It is also important to understand what happens if the installation programme changes because ducts are unavailable, access is delayed or another contractor has not completed preparatory work. A short delay can alter the economics of temporary equipment access, particularly when transport involves an international shipment. Comparing this with a fiber optic cable blowing machine price requires the same attention to scope. A purchase quotation should identify the machine configuration, supplied accessories, applicable delivery terms and any separately priced items. Assess maintenance responsibilities, replacement wear components and the information available for correct operation. Consider whether the equipment suits the cable and duct combinations likely to appear across future contracts, without treating broad compatibility as a substitute for checking each application. Ownership can reduce dependence on external availability, but it also brings responsibility for storage, inspection and keeping the machine ready for use. Fibernet’s development of Lady followed decades of technical experience within the business, including founder Giancarlo Trinei’s work on early Italian cable installations. The family company’s ambitions extend beyond Italy, making a direct discussion relevant for English-speaking contractors planning work in different markets. Nevertheless, manufacturing capability and international ambition should not be confused with confirmed hire availability or guaranteed delivery to a particular destination. Ask Fibernet to clarify the options available for your location and schedule. Share the expected utilisation, installation specifications and budget framework so the enquiry can address the actual commercial decision. A useful outcome is a transparent comparison of suitable equipment arrangements, supported by confirmed specifications and clearly defined responsibilities. That approach keeps the decision focused on dependable cable installation and total project cost rather than an isolated headline rate.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.