Cable blowing machines · Made in Italy

Looking for "optical fiber cable blowing machine on rent"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Plan your cable blowing requirements before requesting a rental

Choosing an optical fiber cable blowing machine on rent starts with understanding the installation, rather than simply identifying equipment available for a particular week. Contractors working on Italian sites need a machine configuration that suits the cable, the duct and the practical conditions along the route. Before requesting a proposal, prepare the cable outside diameter, duct internal and external diameters, intended installation length and any available information about bends or changes in elevation. These details help establish whether the proposed equipment deserves further technical assessment. They also reduce the risk of arranging transport for a machine that cannot accommodate the components already specified for the job. Fibernet provides a direct point of contact for discussing its cable blowing equipment and clarifying whether a suitable commercial arrangement can be offered for your project. Rental availability, terms and the equipment included should always be confirmed directly rather than assumed from an online search. When assessing a cable blowing machine for fiber optic cable installation, consider the complete working arrangement. The machine itself is only one part of the setup: compatible guides, seals, duct connections and an appropriate air supply can all influence preparation and operation. Ask which accessories are included and which require separate provision. Establish whether the proposed configuration accommodates your actual cable and duct combination, and request the relevant operating documentation before committing to a schedule. A route with several tight bends presents different practical challenges from a comparatively straight section, even where the nominal distance is identical. Duct cleanliness, continuity and sealing therefore deserve attention before the machine reaches the site. For a team investigating optical fiber cable blowing machine hire, a useful enquiry describes the planned working dates, location, number of installation sections and expected daily workload. Include access restrictions, available power and compressor details where known. This gives the equipment supplier a clearer basis for discussing suitability and avoids treating installation speed as a guaranteed outcome independent of site conditions. The same preparation is valuable when your project involves several crews sharing equipment, because availability must match the sequence of work rather than an approximate completion date. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on a technical background established over many years. Contact the company with your installation data to explore its equipment and obtain clarification on the options relevant to your application. A technically informed discussion helps distinguish what is suitable, what remains to be checked and what must be agreed commercially before equipment is dispatched. It also creates a clearer record of responsibilities for accessories, preparation and handover, helping your team plan the installation with fewer unresolved questions.

Compare the complete project cost, not just the hire charge

The financial case for an optical fiber cable blowing machine on rent depends on how the equipment will be used throughout the project. A short installation programme may justify investigating temporary access, while recurring work can make ownership worth evaluating. Neither route is automatically preferable. The useful comparison includes the expected working period, mobilisation, accessories, equipment collection or delivery, and the consequences of changes to the construction schedule. If ducts are not ready when equipment arrives, an apparently economical arrangement can become expensive through idle time. Before agreeing any temporary equipment arrangement, ask how the chargeable period is calculated and what happens if the planned start date moves. Clarify extension procedures, return conditions, cleaning responsibilities and any inspection requirements. These details should be recorded in the quotation or agreement rather than left to an informal understanding. When comparing optical fiber cable blowing machine rental proposals, check whether each offer covers the same practical scope. One quotation may refer only to the machine, while another may include components needed for a particular cable and duct combination. Transport, insurance, consumable items and responsibility for damage can also affect the overall comparison. Avoid assuming that the lowest initial figure represents the lowest cost of completing the work. Your team still needs an appropriate setup, a prepared duct route and operators who follow the equipment documentation. Lost working hours caused by an unsuitable configuration can outweigh a modest saving on the equipment charge. A meaningful assessment of fiber cable blowing machine price therefore considers both acquisition cost and the way the machine supports the intended workload. For contractors expecting repeated installations, purchase may deserve discussion alongside any available rental option. Ownership can change equipment scheduling and accessory management, but it also introduces responsibilities for storage, maintenance and keeping the machine ready between projects. Temporary access may reduce some ownership commitments, yet it still requires careful planning around availability and return deadlines. Fibernet can be contacted to discuss its machines and request a proposal based on your requirements; the availability of rental or other commercial arrangements must be verified directly. Provide a realistic programme rather than only the desired first working day. Explain whether the machine will remain at one location or move between sites, and identify any likely interruptions in duct readiness. For international enquiries, ask which delivery arrangements, documentation and support provisions can be offered for the destination concerned. These factors should be confirmed before scheduling dependent work. A clear commercial comparison helps procurement staff and site supervisors evaluate the same proposal from different perspectives, with the objective of selecting suitable equipment under terms that match the actual installation programme.

Check technical compatibility and prepare a clear equipment handover

A successful equipment handover begins before anyone positions the machine beside the duct. For contractors searching for an optical fiber cable blowing machine on rent, the priority should be a documented match between the installation requirements and the proposed configuration. Confirm the permitted cable and duct dimensions for the specific machine, together with the accessories needed for that combination. Do not infer compatibility from a photograph or from a general description of a machine family. Cable construction and the cable manufacturer's installation limits also matter, so the operating plan should respect the relevant guidance on handling, bending and installation forces. Air requirements need equally careful checking. When assessing a compressed air optical fiber cable blowing machine, ask for the required supply characteristics and confirm that the available compressor can meet them under the intended operating conditions. Pressure alone does not describe the complete air supply. Flow, hose arrangement, connections and air preparation can all require attention, according to the equipment documentation. Never exceed the limits specified for the machine, duct, fittings or cable. A prepared route is just as important as an appropriate machine: check the duct using suitable procedures before installation, and address obstructions or damaged sections rather than expecting additional pushing force to compensate. Establish a practical communication method between personnel at the feeding and receiving ends, particularly when the route prevents direct visual contact. The operator should understand the controls, the stopping procedure and the checks required before restarting after an interruption. Keep people clear of moving components and follow the documented safety instructions for pressurised connections. If an electric optical fiber cable blowing machine is under consideration, confirm the specified electrical supply and any site restrictions affecting its use. Equipment descriptions should lead to concrete compatibility checks, not assumptions that different drive arrangements are interchangeable. At handover, record the machine condition and the accessories supplied, then check that the relevant operating and maintenance documentation is available to the team. Agree how technical questions or suspected faults should be reported and what support is included in the commercial arrangement. For a project in Italy, this preparation can help coordinate equipment readiness with the contractor's working programme; for an overseas project, it also provides a basis for checking destination requirements and delivery responsibilities. Fibernet was founded in 2001 and developed from the technical experience of Giancarlo Trinei, whose work with fibre installations began in the early 1980s. Its Lady cable blowing machine, introduced in 2021, forms part of that development. Share your project specifications with Fibernet to discuss the relevant equipment and verify available supply options. Clear documentation, realistic operating expectations and an agreed handover process give your installation team a stronger starting point than equipment selection based on rental duration alone.

Still looking for information about optical fiber cable blowing machine on rent?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information