Cable blowing machines · Made in Italy

Looking for "OFC cable blowing machine rental"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match the blowing equipment to your installation conditions

OFC cable blowing machine rental starts with a practical question: which equipment is suitable for the cable, duct and working conditions on your project? For telecommunications contractors and installation teams in Italy, selecting equipment requires more than comparing daily hire charges. Cable diameter, duct internal diameter, route geometry and available compressed air all influence whether a proposed configuration is appropriate. Fibernet provides a relevant point of contact for discussing these requirements, drawing on an Italian technical background and experience developing cable blowing equipment. Before making commitments, ask the team to confirm whether rental is available for your location and dates, which machine configuration would be proposed and what the quotation includes. A useful enquiry begins with the cable manufacturer's technical information. Include the external diameter, construction, weight and permissible installation limits, together with the duct dimensions and material. Describe the planned installation sections, any changes in direction and the condition of existing ducts. These details help establish a realistic starting point for equipment selection without assuming that one machine will suit every installation. A cable blowing machine for fiber optic cable installation must be evaluated as part of a complete working arrangement, rather than as an isolated item. The compressor, air treatment, connections, cable handling equipment and suitable sealing components all deserve attention. Ask which items are included and which must be supplied separately. Where different cable or duct sizes occur on the same project, identify them before requesting a proposal so that any necessary configuration changes can be considered. Site organisation matters just as much as nominal equipment capability. The position of the cable drum, access to the duct entrance, working space around the machine and communication between operatives can affect how efficiently a shift proceeds. For roadside work in Italy, installation planning should also accommodate the relevant site permissions and traffic management arrangements without treating the machine itself as a substitute for safe working procedures. When comparing fiber optic cable blowing machine rental options, use the same project information for each enquiry. Otherwise, apparently similar offers may cover different accessories, periods or responsibilities. Request written clarification of collection or delivery arrangements, return conditions, operator responsibilities and the procedure for reporting an equipment issue. Discuss how delays caused by inaccessible ducts or postponed site access would affect the agreed period. These questions turn an initial search into a usable equipment brief. They also help your purchasing and installation teams work from the same assumptions. Contact Fibernet with your technical details and proposed schedule to establish the available route forward, rather than relying on unverified assumptions about stock, performance or hire terms.

Assess the complete project cost before choosing rental

The financial value of OFC cable blowing machine rental depends on how the equipment fits your workload, not simply on the quoted hire rate. A contractor with an occasional installation requirement faces a different decision from a business operating several crews throughout the year. Start by estimating the actual period during which the machine is needed, including mobilisation, site preparation, installation and return arrangements. Then separate confirmed working days from possible waiting time. Delays in duct access or other preparatory works can extend the period without increasing productive installation time. A clear schedule helps you ask more precise questions and reduces the risk of comparing quotations built around different assumptions. For any cable blowing machine rental enquiry, request an itemised explanation of the proposed scope. Relevant points include the machine configuration, compatible accessories, transport arrangements, any deposit, responsibility for consumable items and the conditions governing cleaning or damage. These are matters to confirm with the supplier, not benefits to assume are included. Where the project is outside Italy, ask separately about destination coverage, transit times, customs responsibilities and the practicality of returning the equipment. The total cost may change substantially when transport and border procedures are involved. Rental availability and international arrangements should therefore be established before the equipment is incorporated into a binding installation programme. Purchase deserves consideration when the requirement is recurring. Comparing a fiber optic cable blowing machine price with a rental quotation is useful only when the comparison includes the wider obligations of ownership. Storage, maintenance, inspection, spare components and the frequency of use all influence the result. Ownership may provide scheduling flexibility, while a confirmed rental arrangement may suit a defined project with a limited duration. Neither option is automatically more economical. Prepare a simple comparison using your expected workload and clearly identified assumptions, rather than relying on a generic break-even claim. Fibernet's manufacturing background provides context for this discussion. Established in 2001, the company developed its first cable blowing machine, Lady, in 2021. That history can support a conversation about equipment selection, but it does not replace checking the specifications and commercial terms of the actual proposal. Ask which model and configuration are being discussed, what documentation accompanies it and which support arrangements apply. Your installation manager should review the technical scope while purchasing checks the commercial conditions. Bringing both perspectives together can reveal overlooked costs before an order is placed. Send Fibernet a concise summary of your expected installation frequency, cable and duct dimensions, project location and required dates. This gives the team a sound basis for discussing availability and the appropriate commercial option without promising savings or delivery times that have not been verified.

Prepare the site and agree responsibilities before mobilisation

A successful equipment enquiry should lead to a practical mobilisation plan. With OFC cable blowing machine rental, the objective is not merely to have a machine delivered, but to have a suitable configuration available when the installation team and prepared duct route are ready. Begin by checking the condition and continuity of the intended duct section using procedures appropriate to the project. Record known obstructions, changes in duct size and any uncertainty about the route. A blowing machine cannot compensate for an unsuitable or damaged pathway, and attempting to overcome resistance by increasing operating settings can put the cable and equipment at risk. Installation limits must come from the relevant manufacturer documentation and the agreed working method, not from assumptions about what similar equipment achieved elsewhere. Compressed air deserves particular attention during preparation. Confirm the requirements of the proposed machine and installation configuration, including the compressor's suitability and any specified air treatment. Check hoses, couplings and connections against the applicable instructions. Pressure alone is not a sufficient basis for choosing a compressor, because the available airflow and the complete air supply arrangement also matter. The same discipline applies to cable feeding: drum positioning, controlled payout and suitable alignment should be considered before work begins. Ask which checks the operator must complete before starting and which signs require the installation to stop for investigation. These discussions are relevant whether you are considering optical fibre cable blowing machine rental for a single section or planning repeated installations across several sites. Agree who will receive the equipment, verify the supplied components and retain the documentation. Establish how the installation team will obtain technical clarification and what information should accompany a fault report. Model identification, operating conditions and a clear description of the issue are more useful than a general statement that progress is slow. Do not assume that remote support, replacement equipment or site attendance forms part of the arrangement; request confirmation of the support actually offered. Fibernet's approach is rooted in the technical experience of founder Giancarlo Trinei and the continuing involvement of the Trinei family. For customers, the practical question remains how that experience relates to the specific cable blowing machine under consideration. Ask about the proposed configuration, its operating instructions and the maintenance responsibilities that apply during use. At the end of the project, allow time for the agreed shutdown, inspection, cleaning and return process. Keep a record of installation conditions and any issues encountered so that future equipment enquiries become more accurate. For projects in Italy or enquiries from overseas, provide the destination and timetable early. Fibernet can then address your requirements with the necessary context, while availability, transport and contractual responsibilities remain subject to explicit confirmation.

Still looking for information about OFC cable blowing machine rental?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information