Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Searching for OFC cable blowing machine hire usually starts with a practical challenge: your crew has a defined installation window, a prepared duct route and a cable that must reach its destination without avoidable mechanical stress. Before comparing equipment options, establish the cable outside diameter, duct internal diameter, route length and expected changes in direction. These details determine whether a proposed machine is suitable for the application. Fibernet is an Italian manufacturer whose development of cable blowing equipment includes Lady, introduced in 2021. For contractors assessing temporary equipment requirements, contacting the manufacturer is a useful way to clarify technical compatibility and ask which supply arrangements are currently available, rather than assuming that every model can automatically be hired. A cable blowing machine for fiber optic cable installation must be considered as part of a complete working setup. The compressor, air treatment equipment, connecting hoses, cable drum arrangement and duct preparation all influence the result. Ask about the required air pressure and flow for the specific configuration, and compare those requirements with the compressor actually available on site. Pressure alone does not describe the supply: insufficient airflow, restrictions in the connection or moisture in the air can affect performance. Equally, a machine cannot compensate for a damaged duct, unsuitable joints or a route that has not been checked before work begins. Prepare a technical brief that identifies the cable construction, its permitted pushing load and the minimum bend radius stated by its manufacturer. Include the duct material, dimensions and any known restrictions at couplings. If the route has several bends, intermediate chambers or substantial elevation changes, describe them clearly. This information supports a more useful discussion than an enquiry based only on the desired installation distance. When evaluating cable blowing machine hire, confirm which diameter-specific components would be supplied, whether the equipment configuration matches your cable and duct combination, and what documents explain safe operation. Also ask how maintenance condition, wear parts and technical assistance would be addressed under any proposed arrangement. Do not treat a quoted maximum distance as a promise for every installation: achievable results depend on the route, cable characteristics, preparation and operating conditions. For businesses working in Italy or managing projects internationally, the objective is the same: select equipment against measurable site requirements. Send Fibernet the essential installation data and request clarification of suitable machine options, specifications and availability. That approach helps your team identify technical gaps early, prepare the right supporting equipment and make an informed decision before committing resources to the worksite. It also creates a clear reference for comparing proposals on an equivalent technical basis.
The financial case for OFC cable blowing machine hire depends on how your installation work is organised, not simply on the number of days that equipment will be operating. A short contract with a fixed start date may favour temporary access, provided suitable equipment is available and the commercial terms match the programme. A contractor with recurring work, several crews or unpredictable mobilisation dates may instead find that ownership deserves closer consideration. Fibernet can be approached for information about its machines and the supply options available for your location. Any hire arrangement, delivery commitment or support provision should be confirmed directly before it is included in a project budget. Build your comparison around the complete period during which equipment must remain allocated to the job. Transport, collection, site induction, weather interruptions and delays in duct handover can all extend that period beyond the actual blowing operations. Clarify whether a proposed agreement counts calendar days or working days, and ask how extensions would be handled. Establish which accessories are included and which would need separate provision. Diameter-specific guides, seals, compressor connections and replacement consumables can materially affect both readiness and cost. Where relevant, check insurance responsibilities, damage conditions and the procedure for reporting equipment problems. These are questions to resolve with the supplier, not details to infer from a headline rate. A comparison with the OFC cable blowing machine price should use the same technical configuration and a realistic estimate of annual utilisation. Ownership calculations should include maintenance, wear components, storage, transport and the staff time required to keep equipment ready for deployment. Temporary access calculations should include repeat mobilisation costs and the risk that the required configuration is unavailable when another project begins. Neither option is automatically more economical. The better decision is the one that fits your workload, cash flow and ability to manage equipment between installations. Operational suitability must remain part of the calculation. A lower quoted cost offers little advantage if the machine cannot accommodate the specified cable or requires a compressor your team cannot provide. Likewise, comparing different machines without matching their application ranges can produce a misleading result. Request written specifications and identify any assumptions behind the proposal. For contractors assessing a fibre cable blowing machine price alongside temporary supply, use a simple project record: expected installation days, likely standby days, annual project frequency, required accessories and available supporting equipment. Share those details with Fibernet to focus the discussion on your actual working conditions. A clear comparison supports a purchasing or sourcing decision that is commercially defensible without relying on optimistic installation speeds or unconfirmed service promises.
A productive enquiry about OFC cable blowing machine hire should allow the supplier to understand both the installation and the conditions under which your crew will work. Start with the project location, intended mobilisation date and expected duration. Then provide cable and duct specifications, the number of routes, approximate section lengths and the equipment already available to your team. Where possible, attach the relevant cable data sheet and a straightforward route drawing. Photographs of the access chambers, duct ends and proposed machine position can help explain practical restrictions that dimensions alone do not capture. Avoid sending only a target distance and asking for a guaranteed result, because cable blowing performance is affected by several interacting variables. Fibernet brings an Italian manufacturing background to this discussion. Founded in 2001, the company draws on the technical experience of Giancarlo Trinei, whose work with fibre optic installations began in the early 1980s. The introduction of Lady in 2021 marked a specific step in its development of cable blowing machines. For prospective customers, that background is most useful when translated into concrete questions about equipment suitability, operating requirements and maintenance. Ask which technical documents are available for the proposed configuration, what checks are required before use and which components need routine inspection. Confirm the language of the documentation and any assistance arrangements before deployment, particularly when the equipment will be used by an international team. Preparing a cable blowing machine also means preparing the working area around it. Position the cable drum so that the cable feeds smoothly without unnecessary changes of direction. Ensure that the machine can be secured and aligned as specified in its operating instructions. Check that hoses and connections are suitable for the intended pressure and that the compressor setup meets the documented requirements. Duct continuity, cleanliness and joint integrity should be verified using appropriate procedures before installation starts. Any lubricant must be compatible with the cable, duct and equipment, and applied according to the relevant instructions. These preparations reduce avoidable variables; they do not replace competent operation or site safety procedures. If your initial search concerns optical fibre cable blowing machine hire, ask Fibernet explicitly whether a suitable temporary supply option is available for your destination and dates. If purchasing is more appropriate, request the corresponding specification and commercial proposal instead. For deliveries outside Italy, clarify packaging, shipping arrangements, delivery responsibilities and the documents required at destination. Keep availability and transit time separate from the time needed to prepare the machine configuration. Before final confirmation, check that the quotation identifies the equipment, included accessories, agreed support and relevant commercial conditions. A well-defined enquiry gives both parties a shared basis for planning and helps your crew arrive with equipment matched to the actual installation.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.