Cable blowing machines · Made in Italy

Looking for "fibre optic cable jetting machine rental"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Assess the machine before committing to a rental arrangement

A search for fibre optic cable jetting machine rental usually starts with a practical deadline: a crew needs to install cable into a prepared duct, and the equipment must suit the job without creating unnecessary ownership costs. Before discussing a rental period, establish exactly what the installation requires. Record the cable outside diameter, the duct outside and internal diameters, the planned section lengths, and the number and severity of bends. Include information about duct joints, access points, gradients and any previous installation difficulties. These details are more useful than a target distance alone, because cable progress depends on the interaction between the cable, the duct, the airflow and the mechanical feed. Fibernet provides a relevant manufacturer contact for discussing these requirements, although rental availability, commercial conditions and the equipment offered must be confirmed directly rather than assumed from a search term. Founded in Italy in 2001, the company introduced its first cable blowing machine, Lady, in 2021. Its technical background helps frame the right questions when assessing a machine for a particular installation. For example, a contractor working on short sections with frequent access points may have different handling priorities from a team preparing longer continuous runs. Neither application should be assessed simply by choosing the machine with the highest advertised performance figure. When comparing a fibre optic cable jetting machine with other available equipment, ask for the supported cable and duct combinations, compatible seals and guides, operating limits, and the documentation relevant to the proposed configuration. Check how the cable is guided into the feed mechanism and how the operator controls forward movement. Ask which protective functions are present on the specific model, rather than presuming that all machines provide identical safeguards. The air supply also deserves attention: pressure and delivered airflow are different requirements, and both must match the selected equipment and installation conditions. A compressed air fibre optic cable jetting machine needs a suitable supporting air system, not merely a compressor that can reach a stated pressure. Discuss air preparation, hose suitability and connection requirements with the equipment supplier. For an Italian worksite, include site access, working space and the practical arrangements for receiving and returning equipment. For an international project, identify the destination and proposed dates early so that any supply or transport options can be evaluated. A useful enquiry therefore combines technical measurements with a realistic schedule. This gives Fibernet the information needed to discuss machine suitability and clarify whether rental or another supply route can be considered for the project, without promising a commercial service before its availability has been established.

Build the rental budget around productive installation time

The daily charge is only one part of the cost of bringing a cable blowing machine onto a worksite. A meaningful comparison starts with the number of productive installation days, then accounts for preparation, transport, accessories, air supply and potential delays. If the ducts are not ready when the equipment arrives, an apparently economical arrangement can become expensive before any cable is installed. Before committing to fibre optic cable jetting machine rental, agree internally who will verify the duct route, organise the cable drums, arrange access and check that the required supporting equipment is available. The planned start date should reflect actual site readiness rather than an optimistic programme. Ask the prospective supplier when the chargeable period begins and ends, whether collection and delivery days count, and how extensions are handled. Clarify responsibility for cleaning, consumables, missing accessories and damage. These are points to confirm in a written quotation, not conditions that should be inferred from a general product page. A useful enquiry also identifies the full equipment package. Depending on the proposed machine and application, the job may require particular guides, duct clamps, sealing components, hoses or other compatible accessories. Establish which items are included, which are supplied separately and which must already be available on site. If two quotations appear very different, check whether they cover equivalent configurations before comparing the totals. Contractors researching fibre optic cable jetting machine price should distinguish a purchase quotation from a temporary-use quotation, because each answers a different operational question. Ownership may suit recurring work with predictable utilisation, while temporary access may be worth investigating for an isolated contract or a short increase in workload. Neither option is automatically cheaper without considering frequency of use, maintenance responsibilities, storage and equipment availability. Similarly, the phrase fibre optic cable jetting machine hire does not establish that a particular manufacturer operates a hire fleet or supplies every destination. Fibernet should be contacted directly to establish the commercial options relevant to the requested machine and project location. Its Italian manufacturing background is relevant to contractors evaluating the source of their equipment, but delivery arrangements and international supply conditions still require individual confirmation. Provide the destination, desired working dates, cable dimensions and duct specifications in the first enquiry. Include any site restrictions that could affect unloading, movement or collection. For cross-border arrangements, clarify transport responsibilities, applicable documentation and the process for returning the equipment before making a booking. The objective is a transparent comparison based on a complete working package. That approach helps procurement teams avoid selecting an attractive headline rate that leaves the installation crew without an essential component, a suitable air supply or enough time to complete the planned sections.

Prepare the crew and equipment for a controlled installation

On installation day, reliable preparation matters more than treating the machine as a shortcut around unsuitable site conditions. Start by checking the delivered equipment against the agreed configuration and documentation. Inspect the machine for visible damage, verify that the required guides and sealing components are present, and confirm that the cable and duct dimensions match the selected setup. Operators should understand the controls, the prescribed operating limits and the manufacturer's instructions before beginning work. Where anything is unclear, obtain clarification rather than experimenting with settings under pressure from the programme. For a team considering fibre optic cable jetting machine rental, this handover stage is an important part of evaluating the overall arrangement. Access to a machine is useful only when the crew can configure and operate it appropriately for the task. Prepare the work area so that cable can feed smoothly from the drum without unnecessary twisting, sharp changes of direction or avoidable resistance. Check the duct condition using the procedures specified for the project, and address suspected obstructions or defective joints before attempting a full installation. Use only compatible installation consumables where required, following the relevant equipment and cable guidance. The machine must not be used to overcome a route problem by applying progressively more force without investigation. Monitor cable movement and the available operating indicators throughout the run. If progress changes unexpectedly, stop and assess possible causes in accordance with the operating instructions. A difficult bend, a duct restriction, unsuitable cable feed or an air supply issue can require different responses. Recording the circumstances of a stoppage helps the team explain the issue accurately when seeking technical assistance. Contractors evaluating a pneumatic fibre optic cable jetting machine should ask how the proposed model is powered and controlled, because terminology alone does not fully describe its operating arrangement. Equally, an electric fibre optic cable jetting machine should not be assumed to remove the need for compressed air in the blowing process. Verify the complete power and air requirements of the actual model being discussed. Fibernet's development of Lady reflects its focus on cable blowing equipment, while the suitability of any configuration must still be checked against the job. At the end of each working period, follow the prescribed shutdown and cleaning procedures, protect components during transport and retain an accurate record of the accessories. Before return, compare the package with the original delivery inventory and report any operational issues clearly. For repeated contracts, installation records can also support a better future decision between temporary equipment access and ownership. Capture the section characteristics, setup used, working time and reasons for interruptions without turning one successful run into a universal performance promise. Sharing that practical information with Fibernet supports a more informed discussion about the equipment needed for the next project.

Still looking for information about fibre optic cable jetting machine rental?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information