Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A meaningful fibre optic cable jetting machine price starts with the work your installation team needs to complete, rather than an isolated figure. Cable diameter, duct dimensions, route conditions and the available air supply all influence whether a proposed machine configuration is appropriate. For telecommunications contractors working in Italy or managing projects internationally, the useful question is not simply how much a machine costs, but what the quoted equipment enables the crew to do. Fibernet provides a point of contact for discussing these requirements and requesting a quotation based on the intended application. Before requesting pricing, prepare the outside diameter and construction details of the cables you expect to install, together with the internal and external dimensions of the ducts. Include the range of applications rather than only the easiest planned route. A machine selected around one narrow requirement may need additional components when a different cable or duct reaches the site. Ask which cable guides, duct clamps, seals and other configuration items are included in the proposed supply, and which would require a separate quotation. This makes the scope clearer and helps purchasing teams compare offers on equivalent terms. Installation conditions also deserve attention. Changes in direction, duct continuity, cleanliness, moisture and previous duct preparation can affect cable movement and achievable distance. A quotation should therefore be assessed against realistic working conditions, without treating a maximum distance mentioned in sales material as a guaranteed result on every route. Discuss the compressor requirements for the proposed configuration, including the necessary operating pressure, airflow and air preparation. These parameters must be confirmed for the specific equipment and application; pressure alone does not establish whether an air supply is suitable. Businesses comparing a fibre optic cable blowing machine price should also examine the practical details that influence daily use. Consider transport between worksites, the space needed for setup, access to adjustment points and the procedure for changing between cable sizes. Ask how the operator controls cable feeding and what protection or monitoring arrangements are provided on the model under consideration. Request the relevant technical documentation before placing an order, especially where your purchasing process requires a documented compatibility check. Finally, establish the commercial boundaries of the offer. Confirm the currency, quotation validity, applicable taxes, delivery charges, payment terms and estimated availability. For international orders, clarify shipping responsibilities and any destination requirements before comparing totals. An itemised proposal gives your team a stronger basis for approval than an unexplained headline amount. Share your installation requirements through www.fibernetsrl.com so that the pricing discussion can focus on the equipment and configuration relevant to your work.
The purchase figure is only one part of the financial decision when choosing cable jetting equipment. A lower initial quotation does not necessarily produce a lower cost per completed installation, just as a higher quotation does not automatically guarantee better results. The more reliable approach is to connect the proposed machine specification with your expected workload, the resources already available to your crews and the costs of keeping equipment ready for use. Start with your project schedule. A contractor carrying out regular blowing operations has different purchasing priorities from a business handling occasional, short installation campaigns. Estimate how often the equipment will be deployed, how many teams may need it and whether projects overlap. These details help you judge the value of ownership without relying on optimistic utilisation assumptions. When comparing a fibre optic cable jetting machine price, build a simple cost model that separates the initial purchase from recurring expenditure. Depending on the chosen setup, recurring costs may include replacement seals, wear components, approved lubricants, compressor operation, inspection and transport. Confirm maintenance requirements with the supplier rather than assuming that every machine needs the same attention. Ask which checks operators can perform, which tasks require technical assistance and how replacement components are identified and ordered. Availability matters because a modestly priced component can still cause disruption if it is not accessible when needed. A used fibre optic cable jetting machine can appear attractive when budgets are tight, but its condition and completeness need careful assessment. Check the identification details, available operating documentation, service history and compatibility of the supplied accessories. Examine the condition of cable contact surfaces, clamps, seals and controls, and arrange a suitable functional assessment wherever practical. Establish whether any missing parts or repairs would change the overall acquisition cost. Comparing a complete new quotation with an incomplete second hand offer can otherwise create a misleading impression of savings. The same discipline applies when considering fibre optic cable jetting machine rental for a limited project. Verify the hire period, permitted configuration, included accessories, collection arrangements and responsibility for wear or damage with the rental provider. Rental is a purchasing alternative to evaluate, not a service that should be assumed available from every manufacturer. Your final decision should also account for operator familiarity and consistent setup procedures. Clear documentation and repeatable preparation can help crews avoid preventable interruptions, although no machine removes the need to assess duct conditions and follow safe working practices. Give Fibernet a realistic picture of your workload and existing equipment when requesting a proposal. That information supports a more useful discussion about the proposed supply than a price comparison detached from the actual installation task.
Choosing a supplier for cable jetting equipment involves understanding both the proposed machine and the people responsible for answering technical and commercial questions. Fibernet was founded in 2001 by Giancarlo Trinei, whose practical experience with fibre optic installations in Italy dates back to the early 1980s. That technical background provides context for the company's development of cable installation equipment, including the launch of its first cable blowing machine, Lady, in 2021. For a purchasing team, this history is a starting point for an informed conversation, not a substitute for checking the specifications of the equipment being quoted. The family business began its generational transition in 2010 with the involvement of Matteo, Marta and Ismael. Its stated ambition is to bring Italian technical expertise to an international market while retaining a practical approach to product development. Contractors can translate that background into concrete purchasing questions: which configuration suits the planned cable sizes, what documentation accompanies the equipment, and how should the proposed setup be prepared for the intended working conditions? These questions keep the conversation focused on cable blowing operations and the needs of the people using the machine on site. When asking about a compressed air fibre optic cable jetting machine, describe your existing compressor and any air treatment equipment in detail. Provide the relevant specifications rather than only its rated pressure. The suitability of the air supply needs to be checked against the proposed machine and operating conditions. If you are researching an electric fibre optic cable jetting machine, ask the supplier to explain the drive arrangement, electrical requirements and any separate compressed air requirements of the proposed model. An electrically driven feeding mechanism should not be confused with an installation process that necessarily operates without compressed air. Obtain confirmation of the actual configuration instead of inferring it from a product category name. International buyers should also make destination requirements part of the initial enquiry. Identify the delivery country, receiving arrangements and any documentation your procurement or import team needs to review. Ask which shipping options can be quoted and establish the allocation of transport, insurance, customs and unloading responsibilities before ordering. Buyers operating in Italy should likewise clarify delivery arrangements and applicable commercial terms rather than assuming these are included. A clear fibre optic cable jetting machine price enquiry can bring all these details together in one brief: expected cable and duct sizes, typical route conditions, current air supply, intended frequency of use and delivery destination. Add any specific documentation or purchasing deadlines, while distinguishing firm requirements from preferences. Explore www.fibernetsrl.com to contact Fibernet and request a quotation grounded in your project information, with technical suitability and commercial scope assessed together.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.