Cable blowing machines · Made in Italy

Looking for "OFC cable blowing machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Build your quotation around the cable and duct

An OFC cable blowing machine price becomes meaningful when it relates to the cable, duct and working conditions your installation team actually encounters. A headline figure alone cannot establish whether a machine suits a particular contract or whether additional components will be required before work begins. For telecommunications contractors and installation companies, the useful starting point is therefore a technical brief rather than a simple request for the cheapest option. Tell Fibernet which cable diameters you handle, which duct internal diameters are specified and what installation lengths you expect. Include available cable datasheets where possible, because outside diameter alone does not describe every characteristic that affects handling. Cable stiffness, sheath material and the manufacturer's permitted pushing force can all influence equipment selection and operating decisions. When requesting a fiber cable blowing machine price, explain whether your crews repeatedly install one cable size or move between several combinations during the same working week. That distinction helps establish which configuration and changeover requirements need discussion. The compressed air supply deserves equal attention. Pressure and airflow are different parameters, and neither should be assumed from a compressor's appearance or a single headline rating. Provide the compressor specifications, connection details and any available information about air treatment. Ask which supply conditions are necessary for the proposed machine and whether your existing equipment meets them. Route information also matters: bends, changes in elevation, intermediate access points and duct condition can affect the achievable installation distance. No responsible comparison should treat a quoted maximum distance as a promise for every site. A useful enquiry also describes how the equipment will reach the work area, the space available around the duct entry and how often crews relocate between access points. These details help keep the discussion focused on practical suitability rather than unnecessary features. When comparing a cable blowing machine price across quotations, check exactly what each offer includes. Ask for clarification on the machine configuration, cable guides, duct connections, seals, accessories and any items quoted separately. Establish the quotation currency, applicable taxes, delivery terms and validity period before calculating the purchase budget. This avoids comparing a basic machine with a more complete package as though they were equivalent. Fibernet's website provides a direct route to discuss these requirements with the company behind the equipment. Rather than relying on an unsupported online estimate, request a written proposal linked to your intended application. The result should be a clearer purchasing decision: a defined configuration, identifiable exclusions and a sound basis for assessing whether the proposed investment fits the work your teams need to deliver.

Assess operating value beyond the purchase figure

The cost of owning cable blowing equipment extends beyond the amount shown on a purchase order. Installation companies also need to consider preparation time, changeovers, maintenance access and the consequences of selecting equipment that does not match their normal workload. An OFC cable blowing machine price should therefore be assessed alongside the way your crews organise a working day. Consider a contractor moving between several short duct sections: straightforward setup and suitable connections may matter more than a performance figure achieved under very different conditions. Another contractor handling longer sections may need a more detailed discussion about air supply, route preparation and cable handling. Neither scenario justifies assuming that one machine or configuration is best for every buyer. A practical evaluation starts with a representative installation rather than an unusually easy or difficult example. Record the cable and duct specifications, route characteristics, available compressor and typical access constraints. Then ask which operating limits, adjustments and preparation steps apply to the proposed equipment. A cable blowing machine for fiber optic cable installation works as part of a wider installation process, so the machine cannot compensate for every problem elsewhere on the route. Duct continuity, cleanliness, suitable sealing and correct cable feeding all deserve attention before blowing begins. Any lubricant should be appropriate for the cable and duct materials and used in accordance with the relevant guidance. Operators should follow the equipment documentation and cable manufacturer's limits rather than increasing pushing force to overcome an unexplained obstruction. These practices help protect the cable and make troubleshooting more systematic. When reviewing a fiber optic cable blowing machine price, ask how routine wear items are identified and replaced, which maintenance tasks are expected and what documentation accompanies the equipment. Clarify the availability and terms of technical assistance rather than assuming that all suppliers offer identical arrangements. If your teams use multiple cable sizes, discuss what must be changed between applications and which additional parts should be included in the initial quotation. Commercial comparisons become more useful when expressed against realistic workload assumptions. Estimate the number of installation days, likely changes of configuration and the cost of having unsuitable equipment unavailable or idle. Do not turn those estimates into guaranteed savings: productivity depends on site conditions, operator practice and the overall installation process. Instead, use them to identify the questions that matter most before ordering. Fibernet can be approached with this structured brief so that the conversation stays grounded in the proposed application. A carefully defined purchase helps procurement staff, site supervisors and operators work from the same expectations, reducing ambiguity between the equipment being ordered and the tasks it is expected to support.

Discuss your project with an Italian equipment manufacturer

Fibernet brings a family-led Italian manufacturing perspective to the discussion of cable blowing equipment. Founded in 2001, the company draws on the technical background of its founder, Giancarlo Trinei, whose experience with fibre optic installations in Italy began in the early 1980s. That history is relevant to equipment buyers because it explains the practical origins of the business, but a purchasing decision should still rest on the specifications and terms of the machine being proposed. In 2021, Fibernet introduced its first cable blowing machine, Lady, marking a specific step in its product development. Companies researching an OFC cable blowing machine price can use this background as a starting point for a direct technical and commercial conversation, rather than treating company heritage as a substitute for application checks. The generational transition began in 2010 with Matteo, Marta and Ismael joining the business. Today, the company's ambition is to bring its Italian approach to customers internationally while retaining its founding family values. For an installation business in Italy or an English-speaking procurement team abroad, the most productive enquiry combines technical requirements with a clear description of the destination and purchasing process. Explain where the equipment will be used, who will operate it and whether your organisation has specific documentation requirements. If you are comparing a fibre cable blowing machine price for an overseas project, request delivery information for the actual destination rather than assuming that transport costs and arrangements are the same everywhere. Ask the supplier to distinguish equipment costs from freight, insurance where applicable, import charges and other destination-related expenses. Confirm responsibilities under the proposed delivery terms, together with packaging details and the expected dispatch schedule. International buyers should also check which product documentation and conformity information are available for the proposed equipment and whether these meet local requirements. Such checks are more reliable than assuming that every market follows the same rules. A quotation for a fibre cable blowing machine should also identify the exact configuration so your receiving team can verify the delivery against the order. Before committing, agree how technical questions will be handled, which contact route to use and what information should accompany a support enquiry. Model identification, cable and duct dimensions, compressor data and a description of the operating conditions can make subsequent discussions more precise. These are sensible purchasing questions, not promises of particular service terms. Through www.fibernetsrl.com, you can introduce your project and request clarification directly from Fibernet. Share enough detail to support a relevant proposal, including planned applications and delivery destination. This creates a practical route from initial research to a documented quotation for Italian-made equipment intended for your installation work.

Still looking for information about OFC cable blowing machine price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information