Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Searching for a fibre optic cable jetting machine on rent usually begins with a practical challenge: an installation team needs suitable equipment for a defined job, without committing immediately to ownership. However, the booking period is only one part of the decision. Cable dimensions, duct condition, route geometry and the available compressed air supply all affect whether a proposed machine can support the work. Fibernet provides a point of contact for discussing these requirements with an Italian company that developed its first cable blowing machine, Lady, in 2021. Rental availability, destinations served and any associated conditions should be confirmed directly before you build an installation programme around a particular arrangement. Start your enquiry with the cable outside diameter, the duct internal and external diameters, the expected section lengths and the number of installation locations. Include details of bends, changes in elevation and any existing difficulties encountered while preparing the ducts. These details help make the discussion specific rather than relying on a general equipment description. A machine that appears suitable from a photograph may still require different cable guides, seals or duct connectors for your application. Ask which accessories are needed and whether they are included in the proposed supply. When assessing fibre optic cable jetting machine hire, also identify who will provide the compressor and how it will be positioned on site. Pressure alone does not describe the available air supply: delivered airflow, hose configuration and air quality also matter. The equipment requirements must be checked against the relevant technical documentation, together with the limits specified for the cable and duct. No responsible proposal should promise a fixed installation distance without considering these variables. For contractors working in Italy, practical planning also includes access restrictions, delivery arrangements and the timing of roadworks. English-speaking teams coordinating projects across several countries may additionally need to clarify transport documentation, return arrangements and the language of operating information. These are questions to settle before dispatch, not after equipment reaches the worksite. A useful enquiry therefore describes both the physical installation and the commercial timetable. Explain when the machine is needed, how long the active blowing work is expected to take and whether contingency days are required. If your initial search was for a fibre optic cable blowing machine on rent, use the conversation to establish the available options rather than assuming that every configuration is offered on the same basis. Contact Fibernet with your project information to clarify machine suitability, supply possibilities and the next steps towards a documented proposal.
A realistic equipment budget starts with a clear description of the installation, not simply a daily rate. For a fibre optic cable jetting machine on rent, the most useful comparison considers the complete arrangement required to carry out the work. That may involve the machine, compatible accessories, transport, insurance obligations, cleaning requirements and the consequences of returning equipment later than agreed. These items should be established in writing with the supplier wherever a rental arrangement is available. Fibernet can be contacted to discuss its cable blowing equipment and to establish which supply options can be considered for your project. Technical compatibility deserves equal attention. The cable must pass through the appropriate guides and sealing components, while the duct connection needs to match the actual tube being used. Incorrectly selected components can create avoidable air leakage or unsuitable contact with the cable. Before accepting a proposed configuration, ask for the applicable operating limits and check how the feeding mechanism is adjusted. The objective is controlled cable movement within the manufacturer's instructions, not simply the highest possible feeding speed. A compressed air fibre optic cable jetting machine also depends on a properly prepared air supply. Ask what compressor output is required for the intended configuration and whether additional air treatment is specified. Confirm that hoses, connections and other pressure-bearing components are suitable for the operating conditions. The route itself should be assessed before blowing begins: duct continuity, joints, obstructions and preparation can influence the outcome as much as the machine selection. Any lubricant should be compatible with the cable, duct and equipment, and used according to the relevant instructions. When comparing fibre optic cable jetting machine rental proposals, distinguish between equipment capability and performance claims that depend on site conditions. Two apparently similar projects can produce different results because their bends, cable stiffness, duct cleanliness or ambient conditions differ. A meaningful discussion therefore includes the conditions behind any quoted performance, rather than treating a maximum distance as a guaranteed result. Commercial clarity also protects the installation schedule. Ask when the chargeable period begins, how collection is organised and what happens if the work is postponed before dispatch. Establish who is responsible for checking the equipment on receipt and how existing wear should be recorded. Photographs and a complete accessory inventory can help avoid misunderstandings at return. If rental cannot be confirmed, request information about available purchase options without assuming that either arrangement will automatically be more economical. A project-specific comparison, based on anticipated use and verified terms, gives your team a stronger basis for choosing equipment and allocating resources.
The value of suitable cable blowing equipment becomes clear during preparation and operation, when the crew needs a consistent way to set up, monitor and stop the installation. Before requesting a fibre optic cable jetting machine on rent, consider who will operate it and how familiar that person is with the proposed model. Experience with another machine does not replace the operating instructions for the equipment supplied. Ask what documentation is available, what checks are required before use and how technical questions should be raised. Do not assume that supervision, on-site assistance or operator instruction is included unless this has been expressly agreed. Preparation should establish a stable working position for the machine and a controlled path from the cable drum to the feeding mechanism. Drum handling needs to avoid unnecessary resistance, sharp changes of direction and interference with the operator's access to the controls. The team should verify the selected guides, seals and duct connection against the actual cable and tube dimensions before pressurising the arrangement. Safety procedures must address the risks associated with compressed air, moving components and cable handling, following the manufacturer's instructions and applicable site requirements. A pneumatic fibre optic cable jetting machine should never be treated as a substitute for investigating a poorly prepared route. If progress becomes irregular, the response should follow the prescribed operating procedure rather than an improvised increase in pressure or feeding force. Cable condition, drum payout, air supply and duct integrity may all need checking. Agreeing how the team will recognise and respond to abnormal conditions helps keep decisions controlled when installation work is under time pressure. Site records also make the equipment assessment more useful. Record the cable and duct specifications, the route section, relevant operating settings and any interruptions. Where measurements are available, note the conditions under which they were taken. These observations can help distinguish a recurring route problem from an issue with setup or equipment selection. They also provide a more reliable basis for planning the next section than relying on memory alone. Fibernet's background offers context for a technical discussion about these practical requirements. Founded in 2001, the company draws on founder Giancarlo Trinei's experience with early Italian fibre installations and introduced Lady in 2021. Its family-led development continues with a focus on cable blowing equipment and the people who use it. For an English-speaking contractor evaluating a cable jetting machine for fiber optic cable installation, the next step is to submit a clear project brief. Ask Fibernet to confirm suitable configurations, current availability, delivery possibilities and the commercial arrangements actually offered for your destination, whether the work is in Italy or elsewhere.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.