Cable blowing machines · Made in Italy

Looking for "fibre optic cable blowing machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blowing machine quotation includes

A meaningful fibre optic cable blowing machine price starts with the cable you need to install, the duct that will carry it and the conditions your team expects on site. A headline figure cannot show whether a machine suits a particular cable diameter, accommodates the relevant duct dimensions or includes the accessories needed to begin work. For telecommunications contractors operating in Italy, these details can make the difference between a purchase that supports daily installation work and equipment that requires further expenditure before its first assignment. Before requesting a quotation from Fibernet, prepare the external cable diameter, duct external diameter, duct internal diameter and any available information about the cable sheath. Include the approximate installation lengths and describe whether routes involve frequent bends, changes in elevation or restricted access to working positions. These factors help frame a useful equipment discussion, although no machine supplier can reliably guarantee a blowing distance without considering the actual route and installation conditions. When comparing an optical fibre cable blowing machine price with another quotation, check that both proposals cover equivalent configurations. Ask which cable guides, duct connections, sealing components and other necessary fittings are included, rather than assuming every accessory shown in promotional material forms part of the standard supply. Establish whether a compressor is included or must be sourced separately, and request the required air pressure and airflow for the proposed configuration. Pressure alone does not describe compressor suitability: the available airflow and the condition of the compressed air also matter. Discuss any air preparation requirements and confirm which equipment is the purchaser's responsibility. Buyers evaluating a cable blowing machine for fiber optic cable installation should also consider practical handling. Machine weight, positioning, access to controls and the procedure for changing between cable sizes can affect everyday usability. Ask for model-specific documentation rather than drawing conclusions from photographs or broad descriptions. Fibernet was founded in 2001, and its first cable blowing machine, Lady, was launched in 2021. This background provides a starting point for discussing the company's equipment, but the quotation should still identify the exact model and configuration offered. Request clear information about delivery arrangements, payment terms, warranty conditions and the documentation accompanying the machine. For purchases in Italy, clarify whether the quoted amount includes VAT and transport; for other destinations, establish the applicable delivery terms and responsibilities. A well-defined enquiry allows the supplier to address your application instead of providing an isolated number. It also gives your purchasing team a written basis for comparing proposals, approving expenditure and checking that the delivered equipment matches the agreed scope.

Assess operating costs against your installation workload

The purchase figure is only one part of the cost of owning cable blowing equipment. A contractor with regular installation assignments will assess equipment differently from a business with a single confirmed project and an uncertain schedule afterwards. Start with your likely workload: how often the machine will be used, how many crews may need it and how frequently the required cable and duct sizes change. These practical questions help establish whether a particular configuration offers value without relying on optimistic utilisation forecasts. When assessing fibre optic cable blowing machine price, separate the initial purchase from the costs of preparing, operating and maintaining the equipment. Depending on the configuration, your budget may need to cover compressor provision, compatible hoses, air preparation equipment, transport cases, replacement seals and application-specific fittings. Obtain confirmation of each requirement from the supplier, since accessories and operating arrangements vary between models. Avoid assuming that an electrically driven feed mechanism removes the need for compressed air. Feeding power and the airflow used to assist cable movement perform different functions, and the proposed machine's documentation should explain both. For a compressed air fibre optic cable blowing machine, compressor compatibility deserves particular attention. A compressor that cannot sustain the required airflow under operating conditions may constrain performance even when its stated maximum pressure appears sufficient. Air quality, hose arrangement and connections should therefore be reviewed alongside the machine itself. Maintenance planning also belongs in the purchasing decision. Ask which checks operators should perform before use, which components require routine attention and how replacement parts are identified. Clear instructions can help a crew recognise worn seals or unsuitable gripping settings before they affect an installation. Cable protection matters as much as progress: excessive pushing force or inappropriate contact pressure can damage a cable rather than improve productivity. Request an explanation of the available controls and protective features for the specific machine under consideration. A business exploring fibre optic cable blowing machine rental should compare the total project cost, not simply a daily hire charge against a purchase price. Collection, delivery, availability, permitted use, consumables and responsibility for damage may influence the outcome. Rental availability and terms must be checked with the relevant provider; they should not be assumed to form part of Fibernet's offer. Ownership, meanwhile, brings responsibility for storage, maintenance and scheduling between crews. Record these costs alongside the expected number of working days to build a realistic comparison. The strongest purchasing case is not necessarily the cheapest quotation. It is a documented match between the equipment, your installation requirements and the cost your business can justify across its expected workload.

Prepare a precise equipment enquiry for Fibernet

An effective equipment enquiry gives Fibernet enough detail to discuss your application while leaving room to clarify uncertainties. Begin with the work your crew actually undertakes, rather than a preferred specification copied from another machine. State the range of cables and ducts used most often, identify any unusual combinations and explain whether the machine will remain with one team or move between several sites. If your projects are in Italy, mention any access or transport restrictions that influence how equipment reaches the working position. Contractors purchasing for overseas operations should also identify the destination country and request confirmation of shipping arrangements, documentation and any destination-specific requirements before placing an order. An accurate fibre optic cable blowing machine price depends on an agreed supply scope, so it is useful to distinguish essential requirements from optional additions. For example, a contractor using one regular cable size may have different accessory needs from a business moving between several cable and duct combinations each week. Provide these combinations explicitly and ask which can be accommodated by the proposed configuration. Where practical, request a demonstration or a technical discussion based on representative cable and duct samples. Any demonstration should be assessed in context: a short, clean test route does not establish the distance achievable through a long route with multiple bends. Ask how the machine is prepared, how the cable is introduced, how operating settings are adjusted and how the installation is stopped safely. These details reveal more about day-to-day suitability than a speed figure presented without test conditions. If you are considering a used fibre optic cable blowing machine alongside new equipment, request evidence of its condition, maintenance history and supplied accessories. Check whether its identification and documentation are available, whether replacement components can still be obtained and whether any warranty applies. A second hand fibre optic cable blowing machine may have a lower purchase cost, but missing fittings or uncertain service requirements can change the comparison. These are general purchasing considerations, not confirmation that Fibernet supplies pre-owned machines. Fibernet's family background provides context for a direct technical conversation. Founder Giancarlo Trinei began working with optical fibre in the early 1980s, and the company welcomed Matteo, Marta and Ismael into the business during the generational transition that began in 2010. For a buyer, that history is best accompanied by clear answers about the actual equipment being proposed. Use your enquiry to request the relevant specifications, included components, operating requirements and commercial terms in writing. Finish by confirming the next step: a technical review, clarification of accessories or a formal quotation. This approach turns a broad price search into an actionable purchasing discussion without assuming capabilities, availability or services that have not yet been confirmed.

Still looking for information about fibre optic cable blowing machine price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information