Cable blowing machines · Made in Italy

Looking for "fibre optic cable blower price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blower quotation should include

A useful fibre optic cable blower price starts with the installation you need to complete, rather than an isolated figure. Cable diameter, duct dimensions, route condition and the working environment all influence equipment selection. For telecommunications contractors working on Italian sites, these details can vary significantly between a compact street cabinet location and a longer underground duct section. Before requesting a quotation, gather the cable manufacturer's handling limits, the internal and external duct diameters, the planned section lengths and any available information about bends or changes in elevation. This gives the supplier a practical basis for discussing suitability without assuming that one machine configuration will serve every application. Fibernet, founded in 2001, brings a technical background rooted in Giancarlo Trinei's experience with early fibre installations in Italy. The company introduced its first cable blowing machine, Lady, in 2021. For buyers, that history provides context for a conversation focused on how equipment will be used, maintained and integrated into everyday site operations. When assessing a cable blower for fibre optic cable, ask which cable and duct combinations the proposed configuration accommodates and which components are needed to move between those combinations. A quotation should make clear whether relevant guides, seals, connection pieces or other application-specific items are included or priced separately. Their availability and compatibility matter because an apparently economical purchase can become less convenient if the required configuration has not been identified beforehand. Air supply deserves equal attention. Ask for the applicable compressor requirements, including working pressure, airflow and air preparation, and compare these with the compressor available to your crew. Pressure alone does not establish suitability, and a higher figure does not automatically mean a better installation result. Cable condition, duct integrity, sealing and preparation all affect the operation. If you are considering a compressed air fibre optic cable blower, clarify which external resources it requires and how those requirements affect mobilisation costs. Also ask what documentation accompanies the equipment, which maintenance tasks are expected and how replacement wear parts can be requested. For procurement teams in Italy, a comparable commercial offer should identify the currency, VAT treatment, delivery terms and quotation validity. Buyers arranging international delivery should also clarify freight responsibilities and any destination-specific import requirements. The objective is not simply to obtain the lowest headline amount. It is to understand exactly what the proposed expenditure covers, what your team must supply separately and whether the equipment matches the cable blowing work ahead. Contact Fibernet through its website with these application details to request a quotation based on a defined requirement rather than a generic estimate.

Compare operating costs against the work your crews actually perform

Two cable blowing machines with different purchase costs cannot be compared fairly until their proposed working conditions are understood. A contractor handling frequent changes in cable size may place greater value on straightforward configuration changes, while a crew repeating a consistent duct and cable combination may prioritise predictable preparation and operation. Start with a representative selection of actual jobs: identify the cable dimensions, duct sizes, access constraints and typical installation sequence. Record how much time crews spend preparing the machine, positioning the compressor, checking duct continuity, introducing the cable and clearing the work area afterwards. These activities help reveal where a suitable equipment configuration could make a practical difference, without assuming guaranteed installation speeds or distances. When reviewing fibre optic cable blower price, separate the initial equipment expenditure from the costs incurred each time it is deployed. Depending on the selected arrangement, these may include compressor provision, energy or fuel, transport, consumable seals, maintenance and replacement wear parts. Ask suppliers to explain the assumptions behind any operating claims, particularly where performance depends on duct condition or route geometry. A stated installation distance should never be treated as a promise that every route will achieve the same result. Cable stiffness, friction, bends, contamination and leakage can all change what is achievable. The same discipline applies when comparing a pneumatic fibre optic cable blower with equipment using a different drive arrangement. Clarify how the cable drive is powered and how compressed air is used during installation; these are related but distinct questions. An electrically driven mechanism, for example, does not by itself establish that the complete blowing process requires no external air supply. Request the specific operating requirements of the proposed model rather than relying on a broad product category. If your workload is intermittent, comparing ownership with fibre optic cable blower hire can help establish a sensible purchasing threshold. This is a procurement comparison, not a claim that Fibernet provides a rental service. Calculate the likely number of working days, collection or delivery costs, accessory requirements and the consequences of equipment being unavailable when a job is ready. Ownership may offer scheduling control, while hiring may suit a limited requirement, but neither option is automatically cheaper in every situation. For businesses operating across Italy, transport between sites and the ability to prepare the correct configuration before departure also deserve attention. A carefully documented comparison gives purchasing managers and site supervisors a shared basis for decision-making. Present Fibernet with your expected workload and technical constraints, then ask which equipment configuration merits further assessment and what the associated quotation includes.

Build a precise enquiry for Fibernet's Italian cable blowing equipment

The most productive purchasing enquiry is one that a technical team can assess without guessing. Instead of asking only for a fibre optic cable blower price, describe the work that the machine must support and the conditions in which your installers will use it. Include a cable datasheet where possible, together with the intended duct dimensions, available compressor information and the range of cable sizes expected over the coming months. If your business undertakes several kinds of cable blowing work, distinguish the essential requirements from occasional applications. This helps avoid specifying equipment around an exceptional job while overlooking the work that occupies most of your schedule. Photographs of access points or a simple route description can also support the discussion, provided they are relevant and do not disclose confidential customer information. Fibernet's development reflects both longstanding technical experience and a continuing family involvement in the business. Giancarlo Trinei founded the company in 2001, and the generational transition began in 2010 with Matteo, Marta and Ismael joining the activity. The introduction of Lady in 2021 marked the company's first cable blowing machine launch. For customers evaluating Italian equipment, these facts establish the background of the manufacturer without replacing the need to verify the specifications of the proposed machine. Ask which model and configuration are being quoted, what supporting documentation is available and how compatibility with your intended application should be confirmed before ordering. A quotation for a fibre optic cable installation blower should be specific enough for both your purchasing department and your site team to understand. Request a clear description of included equipment, optional components, payment terms, expected dispatch timing and the process for raising technical questions. For delivery within Italy, confirm the destination and any unloading or access restrictions that might affect transport arrangements. For international enquiries, ask Fibernet to confirm whether delivery to the intended destination can be arranged and which shipping responsibilities apply. Italian provenance does not remove the need to check local import, documentation or equipment requirements. Buyers considering a used fibre optic cable blower should apply equally careful checks to machine condition, maintenance history and accessory completeness. An attractive asking amount may not account for missing parts, worn drive components or the work required to restore a suitable configuration. Establish whether documentation and replacement components remain obtainable before comparing a used offer with a new quotation. Whatever purchasing route you assess, keep the final decision tied to verified requirements and a clearly defined scope of supply. Use www.fibernetsrl.com to introduce your project, explain your cable blowing needs and request commercial and technical clarification before committing to equipment.

Still looking for information about fibre optic cable blower price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information