Cable blowing machines · Made in Italy

Looking for "fibre blowing machine rental"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Plan equipment access around the demands of your installation

A short installation programme can create a very specific equipment requirement: your team needs a machine suited to the cable and duct already specified, but purchasing immediately may not match the workload ahead. Fibre blowing machine rental is therefore worth assessing against the actual conditions of the job, rather than considering the hire period alone. Before making an enquiry, gather the cable outside diameter, duct internal and external diameters, planned installation lengths and any available information about bends, joints and changes in elevation. These details help establish whether the proposed equipment configuration is appropriate. They also provide a practical starting point for discussing the accessories and compressed air supply that the work will require. Fibernet, an Italian company founded in 2001, brings a technical background to discussions about cable blowing equipment. Its first blowing machine, Lady, was launched in 2021, marking an important development in the company's manufacturing journey. For contractors evaluating fibre cable blowing machine rental, the useful next step is to describe the application and ask about current availability, compatible configurations and commercial conditions. Do not assume that every machine accommodates every cable size, or that all necessary fittings are automatically included. Ask which cable guides, duct clamps, seals and connection components are needed for your particular combination. Compressor requirements should also be checked against the machine documentation and the installation conditions; pressure alone does not describe whether the available air supply is suitable. Airflow, air quality and the condition of the duct all matter. On an Italian worksite, the delivery address, access restrictions and planned working days can influence when equipment must arrive and when it can be collected. Contractors working internationally should additionally clarify transport arrangements and any applicable customs requirements before committing to a start date. A clear enquiry allows these questions to be addressed together instead of becoming separate problems once the crew is on site. When comparing optical fibre cable blowing machine rental options, ask for written confirmation of the supplied equipment, the agreed period, responsibility for transport and the procedure if the programme changes. Availability and rental terms must be confirmed directly with Fibernet; a website enquiry should not be treated as a booking. Preparing this information in advance supports a more focused conversation and helps your team judge whether temporary equipment access is the right approach. The aim is not simply to secure a machine for a number of days, but to establish a workable arrangement that matches the cable, duct, crew and installation schedule without relying on assumptions.

Check compatibility before the machine reaches the worksite

The most useful equipment checks happen before unloading, when there is still time to resolve a mismatch without interrupting the installation. Start with the cable manufacturer's handling limits and the specifications of the duct into which it will be blown. The relationship between these dimensions influences the installation, but dimensions alone cannot predict the achievable distance. Cable stiffness, duct condition, route geometry, lubrication and the available compressed air supply can all affect performance. A fibre blowing machine should therefore be selected through a technical assessment rather than a headline distance claim. Give Fibernet the actual specifications and describe any uncertainty, including mixed duct sections, existing couplings or a route with several tight changes of direction. Photographs and clear measurements can make the discussion more productive, particularly when the equipment must be prepared for a site that the supplier has not inspected. For fibre blowing machine rental enquiries, request confirmation of the operating range of the proposed model and the components required to match it to your cable and duct. Establish whether those components form part of the proposed arrangement or need to be considered separately. The same care applies to the compressor connection: confirm the specified air requirements and the suitability of hoses, couplings and any air treatment equipment. Never substitute an assumed pressure setting for the manufacturer's operating instructions. At the worksite, trained personnel should follow the applicable instructions for positioning, securing and operating the equipment, including precautions around compressed air and moving parts. Before cable insertion, the duct should be assessed and prepared using procedures appropriate to the installation. A damaged or obstructed route is not resolved simply by increasing the machine's pushing force. Excessive force can put the cable at risk, so the permitted operating limits and the response to unusual resistance need to be understood before work begins. Ask how the proposed machine allows the operator to manage cable feeding and monitor the installation, without assuming that every model has the same controls or protective features. An optical fibre cable blowing machine may be suitable for a particular application only with the correct configuration, making model-specific documentation essential. It is also sensible to agree what information should be recorded if progress becomes inconsistent: cable and duct sizes, installed distance, operating settings and visible symptoms can support a clearer technical discussion. For teams handling several cable sizes within one programme, identify configuration changes in advance and allow time for safe adjustment. This preparation gives the crew a more realistic basis for planning daily work. It also helps distinguish an equipment compatibility issue from a duct preparation problem, reducing avoidable uncertainty when installation conditions differ from the original plan.

Compare temporary access with ownership using the full project cost

Equipment decisions become clearer when the comparison includes the whole installation programme, not just an initial daily rate or purchase quotation. Fibre blowing machine rental may be worth exploring for a defined contract, an occasional installation requirement or a temporary increase in workload. Ownership may deserve closer consideration when the same equipment configuration will be used regularly across a predictable pipeline of jobs. Neither approach is automatically more economical: the result depends on utilisation, transport, accessories, maintenance responsibilities and the cost of having equipment unavailable when a crew is ready to work. Begin with the number of productive installation days you expect, then distinguish those days from delivery time, site preparation, weather interruptions and gaps between work locations. Ask how the proposed rental period is calculated and what happens if the machine must remain on site longer than expected. A low headline figure can be difficult to assess without understanding the start and end points of the chargeable period. When researching fibre blowing machine price, compare quotations on an equivalent basis, including the configuration and accessories needed for your actual cable and duct sizes. A purchase quotation for a basic machine and a temporary arrangement containing additional components are not directly comparable. Equally, do not assume that maintenance, accidental damage cover, transport or technical assistance is included unless the written terms say so. Ask who is responsible for inspection before dispatch, what checks are expected on receipt and how any discrepancy should be documented. For international projects, establish the destination, delivery responsibilities and return arrangements early, alongside any customs formalities that apply. Fibernet's Italian manufacturing background can be relevant to buyers assessing the origin and development of its equipment, but shipping availability, lead times and commercial arrangements should always be verified for the specific destination. The company remains rooted in the technical experience of founder Giancarlo Trinei, with a generational transition beginning in 2010 as Matteo, Marta and Ismael joined the business. For a contractor, that background provides context; the decision still needs to rest on documented suitability and agreed terms. A second hand fibre blowing machine may also enter the comparison when equipment will be used repeatedly, although its condition, maintenance history, compatible accessories and documentation require careful evaluation. This is an alternative to investigate, not an indication that used stock is currently available from Fibernet. Send the team a concise description of your workload, cable specifications, duct dimensions, location and intended dates through www.fibernetsrl.com. Request confirmation of the options currently available and the information needed for a relevant quotation. A structured comparison then allows you to choose according to operational needs, rather than an attractive figure that leaves essential requirements unresolved.

Still looking for information about fibre blowing machine rental?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information