Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A search for fibre cable blower hire usually starts with a practical deadline: a crew needs to install cable into an existing duct route, and the equipment must suit the job before work begins. The most useful starting point is therefore not the number of days required, but a clear description of the installation. Record the cable diameter, duct internal diameter, planned section lengths and any known changes in direction. Include the cable manufacturer's permitted pushing force and minimum bend radius wherever available. These details help establish whether a proposed machine configuration is appropriate and which questions need answering before equipment is selected. Fibernet, founded in Italy in 2001, brings a technical background to discussions about cable blowing machines. Its first machine, Lady, was launched in 2021, reflecting the company's move towards developing equipment specifically for this application. For contractors comparing fibre optic cable blower hire options, contacting the manufacturer can help clarify machine suitability without assuming that every model or commercial arrangement is available for every location. Ask Fibernet to confirm the options applicable to your project, including whether your enquiry can be supported directly or requires a different purchasing or supply arrangement. On site, compatibility extends beyond the machine itself. Cable guides, seals and duct connections must match the actual dimensions involved, while the compressed air supply must meet the requirements of the selected equipment. Compressor pressure alone does not describe its suitability: available airflow, air quality and the manufacturer's operating instructions also matter. A compressed air fibre cable blower should be assessed as part of a complete installation setup, rather than as an isolated item delivered to a worksite. Before requesting a proposal, explain whether the crew will work from a roadside chamber, a restricted access area or a location where moving equipment is difficult. Describe available power, compressor access and the intended working schedule. These operational details can influence equipment selection and preparation. A useful enquiry also distinguishes between confirmed information and assumptions: a surveyed duct diameter is different from a value copied from an old drawing. If route continuity or duct condition has not been checked, say so. No responsible equipment recommendation can guarantee an installation distance solely from a nominal cable size. The objective is to reduce avoidable uncertainty before mobilisation. By sharing accurate project information with Fibernet, contractors in Italy and English-speaking teams working internationally can begin a focused conversation about suitable cable blowing equipment, technical requirements and the commercial options that are actually available.
The cost of temporary equipment is only one part of an installation decision. When evaluating fibre cable blower hire, consider what the crew needs to complete a controlled installation and what could prevent productive work. A machine that appears economical may be unsuitable if its cable range does not match the job, the correct duct connection is missing or the available compressor cannot provide the specified air supply. Start by creating a job-specific equipment schedule. This should identify the proposed machine, compatible cable and duct dimensions, required accessories, compressor requirements and any power supply needed for the chosen configuration. Ask which items are included in a quotation and which must be arranged separately. Where a hire arrangement is available, clarify the collection or delivery terms, return conditions, responsibility for consumables and procedure for reporting damage or faults. These are questions to resolve with the relevant supplier, not conditions to assume from a headline rate. Contractors comparing a fibre cable blower price with the cost of short-term access should also consider how often the equipment will be used. A single installation with uncertain follow-on work creates a different commercial picture from a programme involving repeated deployments. Ownership may offer greater control over scheduling, while temporary access may suit a limited requirement if an appropriate machine is available. Neither approach is automatically better: utilisation, maintenance responsibilities and logistics all affect the decision. Technical preparation deserves the same attention as commercial comparison. Before installation, confirm duct continuity and condition using methods appropriate to the route and the relevant project procedures. Check that the cable can be fed from its drum without excessive resistance and that the machine can be positioned securely. Follow the equipment documentation when fitting guides and seals, setting operating limits and establishing a safe working area. During operation, monitor feeding behaviour and stop to investigate unexpected resistance rather than simply increasing force. A cable blower for fibre optic cable must be used within both its own limits and those of the cable being installed. Keep a record of the setup, route section, operating observations and any interruptions. This information can help crews distinguish a machine adjustment issue from a duct obstruction or cable handling problem. Fibernet's technical heritage makes these practical details a useful basis for an equipment enquiry. Provide the facts of your installation and ask for model-specific information, rather than relying on general performance expectations. A well-defined request supports a more meaningful discussion of equipment suitability and total project cost, whether your worksite is in Italy or another market.
Behind an effective equipment enquiry is a simple question: who can explain how the proposed machine fits the work you actually need to perform? For businesses researching fibre cable blower hire, a conversation with an Italian manufacturer can provide a clearer understanding of the equipment before a commercial decision is made. Fibernet was established in 2001 by Giancarlo Trinei, whose technical experience dates back to the early years of fibre installation in Italy. The company subsequently welcomed Matteo, Marta and Ismael into the business as part of a generational transition that began in 2010. This background provides context for the development of its cable blowing machines, including Lady, introduced in 2021. It does not replace the need for project-specific checks, but it explains the practical engineering focus behind the discussion. An effective first message should identify your company, worksite country, intended installation dates and the person responsible for technical coordination. Attach cable and duct data sheets where possible, together with a concise description of the route. If several cable sizes are involved, make that clear rather than presenting only the most common size. Ask which configurations are suitable and whether changing between them requires different components or adjustments. When assessing a pneumatic fibre cable blower, request the relevant technical documentation and confirm the air supply requirements for the proposed setup. This is particularly important when equipment and compressors are sourced separately. International projects require additional clarity. Ask Fibernet to confirm destination-specific supply possibilities, transport arrangements, documentation and expected lead times before committing crews to a mobilisation date. Do not assume that equipment availability, shipment timing or a hire service will be identical in every country. For buyers comparing a used fibre cable blower with other equipment options, condition and completeness should also be examined carefully. Request identifiable model information, available maintenance records and confirmation that the necessary guides, seals and connections are included. A lower initial outlay is not necessarily economical if essential components are missing or the equipment cannot be supported for the intended task. Discussing these points early helps keep the decision tied to operational needs rather than price alone. The same disciplined approach applies when considering a machine for repeated use: establish the expected workload, responsibility for routine checks and the process for obtaining technical information. Fibernet's website is a starting point for this conversation, not a substitute for confirming individual specifications and commercial terms. Share a precise installation brief and request a response tailored to your cable blowing requirement. That gives your team a stronger basis for selecting equipment, planning site preparation and deciding how best to secure the machine needed for the job.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.