Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A useful fibre blowing machine price starts with the installation work you actually need to complete, rather than a figure detached from its technical context. For telecommunications contractors and installation companies working in Italy, the right purchasing decision depends on the relationship between cable dimensions, duct dimensions, route conditions and the equipment available on site. Before requesting a quotation, prepare the cable outside diameter, duct internal diameter and expected installation lengths. Include information about bends, changes in elevation and whether the ducts are new or have already been used. These details help establish which machine configuration should be assessed and which additional components may be necessary. A machine should not be selected on the assumption that every cable and duct combination will behave in the same way. Cable stiffness, surface condition, duct continuity and friction can all influence the installation process. When comparing a fibre cable blowing machine price, ask whether the proposed package includes the components needed for your stated application. Depending on the equipment design, these may include cable guides, seals, duct connectors or other size-specific parts. Their availability and compatibility should be confirmed in writing rather than inferred from a photograph. The same approach applies to the compressed air supply: ask for the required pressure, airflow and air preparation conditions, then compare those requirements with the compressor you intend to use. A quotation becomes more meaningful when it identifies what is supplied, what remains the customer's responsibility and which assumptions underpin the recommendation. Fibernet was established in 2001 and introduced its first cable blowing machine, Lady, in 2021, building on the technical experience of founder Giancarlo Trinei. That background provides a relevant starting point for discussing equipment selection with an Italian company focused on practical installation needs. Instead of treating purchase cost as an isolated number, use the enquiry to clarify the proposed working arrangement. Explain whether your crews mainly undertake short urban sections, longer continuous routes or projects requiring frequent changes between cable sizes. Ask how those differences affect preparation, adjustment and the components included in the offer. For procurement teams, a clearly defined scope also makes competing quotations easier to evaluate fairly. Record the machine configuration, supplied accessories, applicable taxes, delivery charges and quotation validity separately. If a demonstration is available, agree beforehand which cable and duct combination it will address. This turns an initial price enquiry into a documented purchasing discussion, helping your company assess suitability before committing funds and reducing the likelihood of discovering essential omissions when the equipment reaches the worksite.
The lowest initial equipment cost does not automatically produce the lowest cost per completed installation. A contractor assessing fibre blowing machine price needs to consider how a proposed machine will fit into a normal working day, including transport, positioning, preparation, cable loading, adjustments and cleaning afterwards. These activities matter because the quoted purchase amount is only one element of the investment. Start by mapping the tasks your crew performs between arriving at a chamber and beginning the blowing operation. Identify the available working space, the distance from the compressor and any restrictions on moving equipment around the site. Then ask the supplier to explain the proposed machine's dimensions, weight, handling arrangements and connection requirements. Do not assume that a compact appearance guarantees easy handling in every location, or that higher nominal output will translate into better results on a difficult route. Installation performance depends on the complete operating arrangement and the condition of the cable and duct. A useful comparison of optical fibre cable blowing machine price should therefore include the practical controls and protective functions of each proposed configuration. Ask how pushing force is adjusted, how the operator monitors the process and what action is required if resistance increases. Confirm the relevant operating limits against the cable manufacturer's requirements, rather than relying on general statements about speed. Excessive force or unsuitable settings can compromise the cable, so a purchasing discussion should prioritise controlled operation over headline performance claims. Maintenance deserves equally careful attention. Request information about cleaning procedures, routine inspections, replacement wear parts and the documentation supplied with the equipment. Establish which tasks your own personnel can perform and which require supplier involvement. Where after-sales assistance is offered, clarify its scope, contact arrangements and any associated charges. For a company serving several crews, parts planning can be as important as the original order. Ask whether the quotation can identify recommended consumables and replacement components for your intended usage, without assuming that every spare needs to be purchased immediately. You can then prepare a realistic ownership budget covering the machine, necessary accessories, air supply requirements, transport and expected maintenance. Fibernet enquiries can begin with a description of your working conditions and the installation challenges you want to address. Giving concrete examples helps move the conversation beyond a generic catalogue comparison. For instance, a team changing cable sizes frequently may prioritise adjustment procedures, while another working on restricted sites may focus on handling and set-up. A well-supported decision weighs these operational differences alongside the quoted amount, creating a clearer basis for choosing equipment that matches the work rather than simply choosing the smallest number.
A detailed enquiry helps turn fibre blowing machine price research into a quotation your purchasing and installation teams can assess together. Begin with a concise project profile: your company location, the type of installation work you undertake, the number of crews involved and the anticipated purchasing schedule. Follow this with the cable and duct specifications, including their dimensional tolerances where available. If your projects involve several combinations, distinguish the applications you need immediately from those you may need later. This prevents a future possibility from obscuring the essential requirements of the first purchase. Photographs of typical working locations and technical data sheets can support the discussion, provided they describe the conditions accurately. For companies comparing a fibre optic cable blowing machine price across different proposals, consistency is particularly important. Send each supplier the same application details and request a clear breakdown of the proposed equipment and accessories. Check whether amounts are stated before or after applicable taxes, which currency applies and whether transport has been included. Buyers based in Italy should provide the delivery location and any access constraints; buyers elsewhere should also identify the destination country so that shipping arrangements and relevant documentation can be discussed. Do not assume that a delivery date, international shipment or particular commercial term is included unless it appears in the offer. The same discipline is useful when considering a second hand fibre blowing machine. An apparently attractive purchase needs to be assessed against its condition, maintenance history, included components and suitability for the intended cable and duct sizes. Verify whether replacement parts and technical documentation can be obtained, and establish who is responsible for any inspection or remedial work. A used machine should not be treated as equivalent to a new configuration simply because the original model name is similar. Fibernet's story offers additional context for buyers seeking a direct relationship with an Italian business. Founded by Giancarlo Trinei in 2001, the company developed from technical experience dating back to the early years of cable installation in Italy. The involvement of Matteo, Marta and Ismael from 2010 marked a generational transition, while the launch of Lady in 2021 established a specific milestone in its cable blowing machine development. These facts are useful background, but your purchase should still rest on a clearly documented technical and commercial proposal. Through www.fibernetsrl.com, introduce your requirements and request confirmation of the available configuration, included items and supply conditions. Keep the resulting quotation alongside your application notes so that both office staff and site supervisors understand the basis of the selection. This shared record supports a more transparent approval process and helps ensure that the equipment ordered corresponds to the installation work originally described.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.