Cable blowing machines · Made in Italy

Looking for "fiber optic cable jetting machine hire"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your hire enquiry to the demands of the installation

Choosing equipment for a temporary installation programme starts with understanding the job, rather than simply selecting a machine for a particular number of days. For contractors considering fiber optic cable jetting machine hire, the essential question is whether the proposed equipment can work safely and effectively with the actual cable, duct and site conditions. Fibernet welcomes technical enquiries from installation companies working in Italy and international markets. Before planning around a hire arrangement, ask the team to confirm whether this option is available for your location, required dates and intended application. This avoids treating a general equipment enquiry as a confirmed rental offer and helps establish a realistic basis for the project. Prepare the cable specification before making contact. Useful information includes its outside diameter, construction, weight and the manufacturer's limits for pushing force and bending radius. Pair these details with the duct's internal and external diameters, material, condition and expected route length. A nominally compatible cable and duct combination does not, by itself, establish achievable installation distance. Changes of direction, joint quality, elevation and contamination can substantially affect resistance. Describing these factors allows a more meaningful discussion about the suitability of a cable jetting machine for fiber optic cable installation and the accessories that may be needed. The air supply deserves equally careful attention. Identify the compressor available on site, including its rated delivery and working pressure, and explain whether air treatment equipment is included. Maximum pressure alone is not a reliable measure of suitability: the required airflow, hose arrangement and machine specifications must also be considered. Connections, seals and duct fittings need to be matched correctly, and all pressure limits must be respected. Where technical information is incomplete, clarify it before equipment is dispatched or a crew is scheduled. Commercial details should follow the technical assessment, not replace it. When comparing fiber optic cable jetting machine rental proposals, establish what is included in the quoted scope and what remains the contractor's responsibility. Ask about compatible inserts, transport, documentation, consumables, collection arrangements and any conditions associated with damage or delayed return. These questions are especially important when work is split across several sites or access dates may change. A concise project brief helps Fibernet understand the requirement without relying on assumptions. State the country, installation window, cable and duct dimensions, available compressor and anticipated operating conditions. Include photographs or drawings where these clarify access constraints or unusual connections. With these details available, the discussion can focus on technical suitability, the supply options actually available and the next steps needed before any commitment is made.

Prepare the cable blowing operation before equipment reaches site

A successful cable blowing operation depends on preparation throughout the route, not only on the machine positioned at the entry point. Before requesting fiber optic cable jetting machine hire, review how the crew will receive the equipment, set up the working area and verify that the duct is ready. Confirm that entry and exit points are accessible, that the duct route is correctly identified and that communication between personnel is practical. On roadside projects in Italy, these activities must fit within the applicable site arrangements and working permissions. The equipment choice should support that plan rather than introduce avoidable complications once the installation window has begun. Duct preparation should follow the relevant specifications and approved working procedures. Check continuity, joint integrity and cleanliness using methods appropriate to the duct system. Water, debris, damaged sections or poorly assembled connections can undermine performance even when the blowing equipment is correctly selected. Record significant bends and elevation changes, and identify intermediate access points where available. This information helps the contractor assess whether a route should be approached as one installation section or divided into shorter stages. No supplier can responsibly promise a particular blowing distance without considering these variables and the cable manufacturer's requirements. When assessing a compressed air fiber optic cable jetting machine, distinguish between the air used to propel the cable along the duct and the mechanism that controls cable feeding. These functions interact, but they are not interchangeable. The operator must work within the specified pressure and pushing limits while monitoring cable movement and responding to resistance. Any protective functions, controls and adjustment procedures should be checked against the documentation for the exact model supplied. Do not assume that familiarity with another machine is sufficient, because control layouts, compatible accessories and operating limits can differ. Practical preparation also includes cable drum positioning and controlled payout. Arrange the drum so that the cable reaches the machine without excessive bends, dragging or sudden changes in tension. Provide enough working space to inspect the feed path and keep personnel clear of moving components. Check that hoses and connections are suitable for their intended pressure and secured according to the equipment instructions. Before disconnecting any pressurised component, isolate the supply and release pressure using the prescribed procedure. These are operational planning matters, not substitutes for the manufacturer's safety instructions or the contractor's risk assessment. A cable blowing machine for fiber optic cable installation should therefore be evaluated as part of a complete working arrangement. Ask Fibernet which technical documents are available for the proposed equipment and what information is required to assess compatibility. Clarify accessory requirements before mobilisation, especially if several cable or duct sizes will be used. Documenting these decisions gives supervisors a clearer handover, helps crews avoid unsuitable substitutions and makes any subsequent technical enquiry more precise.

Compare temporary equipment access with longer-term ownership

The commercial value of temporary equipment access depends on how often the machine will be needed and how predictable that demand is. A contractor researching fiber optic cable jetting machine hire may be covering a short programme, replacing unavailable equipment or assessing requirements before investing. Another contractor may have repeated installations that make ownership worth examining. Neither route is automatically preferable. Start by mapping the likely working days, gaps between projects, transport movements and range of cable sizes involved. Then compare only the supply options that are genuinely available, with written confirmation of their scope and conditions. Fibernet brings a manufacturing perspective to that discussion. Founded in 2001, the company draws on the technical background of founder Giancarlo Trinei, whose experience includes early fibre optic installations in Italy. Its first cable blowing machine, Lady, was launched in 2021. For a prospective customer, this background provides context for asking focused questions about machine design, intended applications and support. It should not be treated as evidence that a particular rental package, delivery date or performance figure is available. Those points require a specific response based on the equipment and destination involved. When assessing fiber optic cable jetting machine price, look beyond the headline amount. A useful comparison identifies the machine configuration, compatible cable and duct ranges, included accessories and any additional equipment required to operate it. Transport, insurance, maintenance responsibilities and replacement consumables can affect the overall cost. For temporary access, also clarify when the chargeable period begins and ends, how extensions are agreed and what happens if the installation is delayed by site conditions. These details help distinguish a low initial quotation from an arrangement that genuinely fits the programme. Comparing a used fiber optic cable jetting machine with a new machine or a temporary arrangement requires a different set of checks. Ask for identification details, operating documentation, maintenance records where available and evidence of the condition of feed components, seals and controls. Verify accessory compatibility rather than assuming that every supplied insert will suit the planned cable. An apparently economical purchase can become less attractive if essential parts are missing or the equipment cannot be assessed adequately. Equally, well-documented equipment may warrant consideration when its condition and specification meet the contractor's needs. For companies operating beyond Italy, the enquiry should also identify the destination, expected delivery window and any relevant shipping or import requirements. Ask Fibernet to confirm the available supply arrangements and supporting documentation rather than assuming that domestic terms apply internationally. A clear comparison ends with a practical decision: which equipment configuration suits the work, which commercial route is available and what must be confirmed before mobilisation. Contacting the team with a structured technical and commercial brief is the most useful next step towards answering those questions.

Still looking for information about fiber optic cable jetting machine hire?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information