Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Finding a fiber optic cable jetting machine on rent starts with understanding the installation, rather than choosing equipment solely by its daily rate. A machine must suit the cable, the duct and the working conditions if it is to support controlled feeding without placing unnecessary stress on the cable sheath. For contractors working in Italy or preparing projects overseas, an effective enquiry should therefore include the cable outside diameter, duct outside and inside diameters, intended installation length and available compressed air supply. These details help establish which equipment configuration deserves consideration and which questions must be resolved before a commercial proposal can be assessed. Fibernet provides a manufacturer contact point for discussing cable blowing equipment; rental availability, contractual arrangements and delivery options should be confirmed directly for the intended destination and project dates. A useful technical brief also describes the route. Long straight sections present different challenges from ducts containing successive bends, changes in elevation or intermediate access points. Existing ducts may require inspection, cleaning and integrity checks before the blowing operation begins. Where a route has several sections, providing the approximate length and geometry of each section gives a clearer picture than quoting only the total distance. It also helps distinguish equipment selection from problems that originate in the duct infrastructure itself. When assessing a cable jetting machine for fiber optic cable installation, ask how the cable is guided into the machine, how the gripping mechanism accommodates its diameter and which duct connection components are required. Compatibility should be verified against the actual cable and duct specifications, not inferred from photographs or a broad product description. The condition and suitability of seals, guides and feeding components can influence preparation time as well as operation. A complete enquiry should identify whether those parts need to be supplied with the machine or sourced separately. Equally, a compressed air fiber optic cable jetting machine needs an appropriate air supply. Compressor pressure alone does not establish suitability: available airflow, connection arrangements, air treatment and the limits specified for every component also matter. The correct settings depend on the equipment documentation and installation conditions, so operators should never assume that maximum pressure produces the best result. Before committing to a rental arrangement, clarify who supplies the compressor, hoses and accessories, and who verifies their compatibility. This preparation turns a general availability request into a practical discussion. It allows your team to compare proposals on a consistent basis, identify missing items early and plan a realistic mobilisation schedule. Contact Fibernet with the relevant dimensions, route information and intended working period to discuss the equipment requirements and establish which supply options can actually be offered.
A short installation programme can make temporary access to cable blowing equipment worth investigating, but the quoted hire charge is only one part of the decision. Transport, accessories, cleaning requirements, consumable components and the agreed return procedure can all affect the overall expenditure. For a contractor seeking a fiber optic cable jetting machine on rent, the most useful comparison is therefore the total cost of completing the planned work under clearly defined conditions. Ask for a written description of what is included, what is excluded and which responsibilities remain with your company. An apparently lower rate may be less attractive if essential guides or duct adaptors are missing, or if transport arrangements consume a substantial part of the available installation window. When discussing fiber optic cable jetting machine hire, establish exactly when the chargeable period begins and ends. Collection, despatch, delivery and return receipt are different events, and the agreement should state which ones determine the duration. Clarify how weekends, public holidays, weather disruption and extensions are treated. Construction schedules can move when ducts are not ready or access permissions change, so understanding the extension procedure before mobilisation helps avoid rushed decisions later. Availability for an additional period should never be assumed simply because the equipment is already on site. The equipment handover deserves equal attention. Request identification of the machine and supplied accessories, together with relevant operating documentation and an agreed record of condition. Confirm the inspection procedure on return and the process for reporting a fault during use. Your team should understand what assistance is available, how to contact the supplier and whether any replacement arrangement exists under the proposed terms. These are questions to settle with the contracting party, rather than benefits to presume. The same applies to insurance, security deposits and responsibility for accidental damage or loss. Comparing temporary access with purchase can also be worthwhile when several installations are scheduled. A fiber optic cable jetting machine price enquiry should consider the configuration needed across those projects, not merely the lowest initial purchase figure. Repeated transport charges, uncertain equipment availability and the administrative effort of arranging separate hire periods may influence the balance. Conversely, a clearly bounded project may not justify ownership if future utilisation is uncertain. Neither option is automatically preferable; the right decision depends on workload, technical compatibility and the actual commercial terms available. Fibernet can be contacted to discuss its cable blowing equipment and request information relevant to that assessment. Explain where the machine would be used, the expected duration and the cable and duct dimensions. Ask explicitly whether rental can be arranged for your circumstances, and request written confirmation of availability and conditions before incorporating it into your project budget or promising an installation date to your customer.
The day a cable blowing machine reaches the site should be the start of an organised installation, not the first opportunity to check whether its components match the job. Preparation begins with a clear working area, suitable access to the duct entry point and an agreed method of communication between personnel at the relevant locations. The cable drum must be positioned so that the cable can feed smoothly towards the machine without avoidable rubbing, sharp changes of direction or uncontrolled movement. Follow the equipment instructions and the cable manufacturer's handling limits throughout. A fiber optic cable jetting machine on rent still requires the same attention to setup and operation as equipment owned by the contractor; temporary possession does not reduce the need for competent personnel or documented checks. Before introducing the cable, assess the duct using methods appropriate to the infrastructure and the project specification. Confirm that the intended section is correctly identified and that connections, access points and the receiving location are ready. Debris, water, damaged couplings or unexpected restrictions can undermine progress regardless of the machine selected. Where cleaning or testing is required, complete it before committing the installation team and equipment to the blowing stage. If a compatible lubricant is proposed, verify its suitability with the relevant cable, duct and machine documentation rather than treating lubrication as a universal solution. During setup, use the correct cable guides, seals and duct connection parts. Inspect accessible feeding surfaces and check that components are secured as instructed. A cable blowing machine for fiber optic cable installation should be operated within its specified limits, with feeding force and air settings selected according to the documented procedure and actual conditions. Do not attempt to overcome an unexplained stoppage simply by increasing pressure or drive force. Stop safely, isolate the equipment as required and investigate the likely cause before proceeding. Observing the cable feed and recording operating conditions can help distinguish a setup issue from a restriction further along the route. For international projects, logistics should be resolved before despatch. If you are investigating fiber optic cable jetting machine rental across borders, establish the delivery destination, transport responsibilities, customs requirements where applicable and the arrangements for returning the equipment. Confirm which documents and packing materials must accompany it. Electrical supply requirements, where relevant to the chosen configuration, also need checking against site provision. Fibernet was founded in 2001, building on founder Giancarlo Trinei's technical experience, and introduced its first cable blowing machine, Lady, in 2021. For contractors evaluating Italian cable blowing equipment, that background provides a starting point for a direct technical discussion, not a substitute for checking specifications. Share your installation requirements with Fibernet and request confirmation of the appropriate configuration, available supply arrangements and supporting documentation before finalising your mobilisation plan.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.