Cable blowing machines · Made in Italy

Looking for "fiber optic cable installation machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around your actual installation conditions

Choosing a fiber optic cable installation machine starts with the relationship between the cable, the duct and the route, rather than a headline installation speed. For telecommunications contractors working on Italian sites or managing projects internationally, the practical question is whether the equipment suits the installation conditions that crews will actually encounter. Cable outside diameter, duct internal diameter, cable stiffness, route length and changes in direction all influence the assessment. A machine should therefore be considered alongside the cable manufacturer's handling limits and the condition of the installed duct. Fibernet provides a point of contact for discussing these requirements and exploring cable blowing equipment against a defined application, rather than treating every installation as the same task. When assessing a cable blowing machine for fiber optic cable installation, prepare the cable and duct specifications before requesting advice. Include the planned installation distance, available compressor information, expected site access and any known restrictions along the route. These details help establish which equipment characteristics and accessories need closer examination. Cable guidance, suitable seals and correctly matched duct connections matter because an unsuitable interface can compromise the installation before useful progress begins. The cable feed must also be managed carefully: a poorly positioned drum or an awkward entry angle can introduce resistance that the blowing machine should not be expected to overcome. Compressed air supports cable movement through the duct while the feeding mechanism introduces the cable in a controlled manner. Successful operation depends on balancing these functions within the limits specified for the equipment, cable and duct. More pressure or greater pushing force is not automatically a better solution, especially when an obstruction, leak or tight bend is responsible for resistance. Operators need to recognise changing conditions and follow the applicable operating procedure rather than chase distance at the expense of cable integrity. A compressed air fiber optic cable blowing machine must therefore be evaluated as part of the complete installation arrangement, including the compressor, air treatment requirements and connection components. Before committing to equipment, ask which cable and duct combinations are supported, what adjustments are required between jobs and which items are included in the proposed configuration. Request the relevant operating documentation and clarify inspection and maintenance requirements. For a contractor handling several types of duct installation, these questions are more useful than assuming one setup will cover every project. Contacting Fibernet with a clear technical brief helps turn an initial enquiry into a focused discussion about cable blowing requirements, practical compatibility and the information needed to prepare an appropriate equipment proposal.

Prepare the duct, air supply and cable feed before blowing begins

A productive cable blowing operation is usually built before the cable starts moving. The crew needs an accessible working position, a stable machine arrangement and a cable drum that can pay out smoothly without introducing unnecessary tension. The duct route should be identified and checked using methods appropriate to the project specification. Where required, cleaning and proving procedures help reveal contamination, restrictions or discontinuities before they interfere with installation. Duct joints and connections deserve particular attention because air leakage can reduce the effectiveness of the blowing process. A fiber optic cable installation machine cannot compensate for a duct system that has not been prepared adequately, so equipment selection and route readiness should be addressed together. Compressor selection also requires more than checking a single pressure figure. Available airflow, working pressure, connection arrangements and the air quality requirements of the chosen equipment must all be considered. The supply needs to remain suitable under operating conditions, not merely match an unloaded rating. Ask for the manufacturer's requirements and assess the complete air path, including hoses, fittings and any specified treatment equipment. A pneumatic fiber optic cable blowing machine should be connected and operated only within its documented limits, with suitable precautions around pressurised components. Before disconnecting any part of the system, operators must follow the prescribed isolation and depressurisation procedure. During installation, controlled feeding is more valuable than abrupt changes intended to recover lost time. The operator should monitor how the cable enters the machine, whether the drum rotates freely and whether progress changes unexpectedly. A sudden slowdown can have several causes, including increased route resistance, an issue at the cable supply or a problem with the air connection. The correct response is to investigate according to the operating instructions, not automatically increase force. Cable bending radius and allowable installation loads remain important throughout the operation, including at the machine entrance and wherever the cable is handled outside the duct. When comparing a cable jetting machine for fiber optic cable installation, consider how easily the crew can inspect the cable path, make permitted adjustments and access routine maintenance points. Ask which checks belong before each shift and which components require scheduled inspection or replacement. Practical records can also improve repeatability: document the cable and duct combination, route conditions, equipment configuration and any interruptions encountered. Over successive projects, this information helps distinguish equipment questions from duct preparation or site organisation problems. Fibernet can be approached with these operational details when discussing an application, allowing the enquiry to focus on the work the machine needs to perform rather than on an isolated catalogue description.

Discuss your investment with an Italian cable blowing equipment company

Fibernet's approach to cable blowing equipment comes from a technical background that predates the company itself. Founded in 2001, the business draws on Giancarlo Trinei's experience with early fibre installations in Italy during the 1980s, including installation and testing work associated with the country's first submarine cable projects. That background provides context for the company's focus on practical engineering and equipment intended to simplify installation work. In 2021, Fibernet launched Lady, its first cable blowing machine. For a buyer evaluating a fiber optic cable installation machine today, this history is a starting point for a technical conversation, not a substitute for checking the suitability of a particular model and configuration. An effective purchasing discussion should connect the proposed equipment to the contractor's workload. A business repeatedly installing similar cable and duct combinations may have different priorities from a contractor moving between varied projects with changing access conditions. Transport arrangements, setup time, compatibility requirements and maintenance planning can all influence the value of the investment. Instead of requesting only a fibre cable diameter range or a maximum distance, explain how the crew works and which installation challenges recur. This gives the supplier a more useful basis for discussing equipment options and any limitations that need to be understood before purchase. When investigating fiber optic cable blowing machine price, ask what the quotation actually includes. The machine, cable guides, seals, duct interfaces and other application-dependent components should be clearly identified where relevant. Clarify documentation, warranty terms, spare parts arrangements and the scope of any assistance offered rather than assuming these are identical across proposals. Compressor requirements should be considered separately if the air supply is not part of the quoted package. A meaningful cost comparison looks at the complete working configuration and foreseeable maintenance needs, not simply the lowest initial figure. Buyers considering a used fiber optic cable blowing machine should take a similarly disciplined approach. Previous operating history, visible wear, availability of replacement components and the condition of feeding and sealing elements can materially affect suitability. Request evidence of condition and clarify which checks are possible before purchase; a lower asking price does not establish that the equipment is ready for a specific contract. Fibernet's family business entered a new generational phase in 2010 with Matteo, Marta and Ismael joining the company, while retaining its technical foundations. For English-speaking companies in Italy and international buyers interested in Italian equipment, the next step is a specific enquiry through www.fibernetsrl.com. Provide your cable and duct data, project location and intended working conditions, then request confirmation of the proposed configuration, commercial terms and delivery arrangements for your destination.

Still looking for information about fiber optic cable installation machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information