Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing an optical fiber cable laying machine starts with understanding how the cable will enter the duct, rather than comparing headline speed figures alone. For telecommunications contractors working on Italian sites, the practical questions concern cable dimensions, duct condition, route geometry, available compressed air and the space available around the access point. Fibernet develops cable blowing equipment for this working environment, bringing an Italian engineering perspective to the needs of installation teams. Founded in 2001, the company introduced its first cable blowing machine, Lady, in 2021. Its approach draws on the technical background of founder Giancarlo Trinei, whose experience with optical cable installation and testing began in Italy during the early 1980s. That background provides useful context for a conversation about equipment selection, but every proposed application still needs its own technical assessment. Before selecting an optical fiber cable blowing machine, prepare the cable outside diameter, the duct internal diameter, the cable manufacturer's handling limits and an outline of the intended route. Include information about bends, changes in elevation, intermediate access points and any uncertainty about duct cleanliness or continuity. These details help establish which machine configuration should be considered and which operating constraints require further investigation. Cable blowing combines controlled mechanical feeding with airflow inside a suitable duct. The feeding mechanism advances the cable while moving air assists its progress along the route. Successful operation therefore depends on the relationship between the machine, cable, duct and air supply, not on the machine in isolation. Excessive pushing force can damage a cable, while unsuitable seals or an inadequate air supply can undermine an otherwise well prepared installation. A cable blowing machine for fiber optic cable installation should consequently be assessed for its compatible dimensions, adjustment arrangements, operating controls and documented limits. Ask how the cable is guided through the machine, how contact pressure is set and which components must change when moving between cable sizes. Also clarify the required compressor characteristics and any air treatment specified for the equipment. These are practical purchasing questions, not minor accessories to resolve after delivery. For a contractor managing several crews, repeatable setup procedures can matter as much as the maximum capability of an individual unit. Recording the approved configuration for each cable and duct combination helps teams prepare consistently and recognise when a site falls outside the planned conditions. Through www.fibernetsrl.com, businesses can introduce their installation requirements to Fibernet and request information about suitable equipment. The aim is to move from a broad product search towards a technically grounded discussion, with clear expectations about compatibility, preparation and the information needed before making a purchasing decision.
An optical fiber cable laying machine delivers its value as part of a coordinated site setup. The machine needs a stable working position, the cable drum needs controlled payout, and the duct entrance must allow the cable to approach without an unnecessarily tight bend. Planning these relationships before the crew arrives can prevent avoidable interruptions during installation. On a street works site in Italy, available space may be restricted by pedestrian access, traffic management arrangements or the position of an existing chamber. In these situations, equipment dimensions, handling requirements and access to the controls become important selection criteria. Ask for the relevant product documentation rather than assuming that any compact machine will suit every working position. If evaluating a compressed air optical fiber cable blowing machine, consider the air supply as an essential part of the system. Compressor pressure and delivered airflow are different measurements, and both need to be checked against the selected machine's requirements. Hoses, connections, filtration and any specified cooling or drying arrangements also influence the air reaching the equipment. Never substitute a general compressor rating for a verified assessment of the complete air supply. Before blowing begins, the duct should be checked and prepared according to the applicable installation procedure. Obstructions, damaged sections, water or contamination can affect cable progress and may require corrective work before the machine is connected. Where lubricant is appropriate, its compatibility with the cable sheath, duct and equipment should be established rather than assumed. Preparation also includes confirming cable handling limits and arranging communication between personnel at the relevant access points. During installation, the operator should monitor cable movement and respond to unexpected resistance instead of attempting to overcome every interruption by increasing force. Any adjustment must remain within the documented limits of the cable, duct and machine. If progress changes unexpectedly, stopping to investigate can protect both the cable and the equipment. A clear operating procedure should explain who may make adjustments, how an installation is paused safely and what checks are needed before restarting. When comparing an electric optical fiber cable blowing machine with other drive arrangements, distinguish the feeding mechanism's power source from the airflow used for blowing. An electrically driven feed system does not automatically remove the need for compressed air. Confirm the actual operating principle and site utility requirements for each model under consideration. Fibernet can be approached with a description of the intended application so that the equipment discussion reflects these practical constraints. Supply photographs or drawings of difficult access positions where useful, alongside cable and duct specifications. Bringing those details into the conversation early helps identify questions that a product name alone cannot answer and supports a more deliberate equipment choice for the installation team.
The purchase of an optical fiber cable laying machine should be assessed against the work it will perform over time, not simply the figure on an initial quotation. For a contractor, the relevant question is whether the proposed equipment can support the cable sizes, duct combinations and working arrangements that recur across its projects. A machine selected for one unusually favourable route may not be the right choice for a broader programme of installations. Start by separating essential requirements from occasional preferences, then use that distinction to guide the technical discussion with Fibernet. When investigating fiber cable blowing machine price, ask what the proposed supply actually includes. Depending on the equipment and quotation, items such as guides, seals, connection components or other configuration parts may need separate clarification. Establish which elements are required for the first planned installation and which would be needed for later changes in cable or duct dimensions. Request current documentation covering operating limits, setup, maintenance and safe handling. A clear quotation should make the scope understandable without relying on assumptions about accessories or capabilities. Ownership planning also includes routine inspection and care. Cable contact surfaces, guides and sealing components should be checked as directed by the manufacturer, with damaged or worn parts addressed before they affect operation. Storage conditions, cleanliness after use and suitable transport arrangements deserve attention, particularly when equipment moves frequently between sites. Ask about the availability of replacement components and the process for obtaining technical assistance, rather than assuming a particular response time or service arrangement. If a used optical fiber cable blowing machine is being considered as an alternative, compare its documented condition and configuration with the requirements of the next project. Previous use, maintenance records, missing components and access to instructions can materially affect its suitability. A lower purchase figure does not establish compatibility or demonstrate that the equipment can be operated within the necessary limits. The same application checks should therefore be applied to both new and previously owned equipment. Fibernet's identity combines Italian roots with an ambition to serve installation businesses internationally. The company began its generational transition in 2010, welcoming Matteo, Marta and Ismael into the business while maintaining the founding family's involvement. For customers, this background is most useful when connected to practical questions about the equipment and the purchasing process. Businesses outside Italy should confirm destination-specific delivery arrangements, required documentation and applicable product requirements directly with the company. Businesses operating in Italy should likewise explain their actual site conditions rather than relying on market location as a substitute for technical detail. Contact Fibernet through www.fibernetsrl.com with the proposed cable and duct specifications, expected workload and purchasing priorities. That information creates a useful starting point for discussing a suitable configuration, requesting a quotation and understanding the next steps without relying on unsupported performance assumptions.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.