Cable blowing machines · Made in Italy

Looking for "fiber optic cable blowing machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your blowing machine quotation should include

A useful fiber optic cable blowing machine price starts with the work your team needs to complete, rather than a figure detached from operating conditions. Contractors installing cable into existing ducts need equipment that matches the cable diameter, duct dimensions, route characteristics and available air supply. A machine that appears economical at first can become a poor investment if its configuration does not suit the installation programme. Before requesting a quotation from Fibernet, gather the cable manufacturer's dimensional specifications, the duct's internal and external diameters, and details of the routes involved. Include typical section lengths, changes in direction and any known restrictions at access points. These details provide a practical basis for discussing suitability without assuming that one configuration will serve every site. The quotation should distinguish the machine itself from any application-specific accessories. Depending on the equipment proposed, items to clarify may include cable guides, duct connections, seals, drive components and the arrangements needed to connect the air supply. Ask which components are included, which are optional and which may be required when changing between cable or duct sizes. This prevents a low headline figure from obscuring the cost of a usable installation package. It also helps purchasing teams compare proposals on equivalent terms instead of comparing differently equipped machines. When assessing a cable blowing machine for fiber optic cable installation, consider how operators will prepare, adjust and transport it between working positions. Access to controls, straightforward component changes and manageable handling can influence working time, although their value depends on the particular model and site routine. Request the relevant technical documentation rather than assuming that a feature is standard across a product range. The same discipline applies when investigating a compressed air fiber optic cable blowing machine: pressure alone does not describe the air supply requirement. Available airflow, compressor operating conditions and air preparation must also be checked against the selected machine's specifications. For an Italian installation contractor, a written quotation should make the commercial scope clear, including applicable taxes, delivery arrangements, payment terms and quotation validity. Buyers outside Italy should additionally clarify the delivery destination and the allocation of transport and import responsibilities. Fibernet's showcase website is a starting point for a technical and commercial discussion, not a reason to assume a published universal tariff. Presenting a clear installation brief allows your purchasing and site teams to ask better questions, identify missing items early and evaluate a proposal against the work actually planned. The result is a more meaningful purchasing decision, supported by an agreed equipment scope rather than an isolated number.

Compare purchase cost with the demands of everyday installation

The financial value of a blowing machine becomes clearer when purchase cost is considered alongside the conditions in which it will operate. A contractor completing repeated installations has different priorities from a team preparing for an occasional specialist assignment. Start with a realistic schedule: how many working days will require the machine, which cable and duct combinations will recur, and how often will equipment move between sites? These questions help establish whether a proposed configuration addresses the actual workload. They also prevent unnecessary spending on capabilities that the installation programme does not require. When comparing a fiber optic cable blowing machine price, separate confirmed equipment characteristics from assumptions about productivity. Installation distance and speed are influenced by duct condition, route geometry, cable properties, lubrication where appropriate, and the available compressed air supply. No purchase figure can guarantee a particular result across every route. Instead, ask for the proposed machine's operating limits and discuss how those limits relate to representative sections of your project. A technically suitable machine still requires a properly prepared duct and an installation procedure consistent with the equipment and cable manufacturers' instructions. Budgeting should also account for consumable and replacement items. Ask which parts normally require inspection, what maintenance the manufacturer specifies, and how replacement components can be identified and ordered. Clarify the warranty terms and the support arrangements offered with the actual quotation. These points matter because an interruption during a tightly scheduled installation can affect labour planning and subsequent work. However, support response times, spare parts availability and maintenance intervals should be confirmed rather than inferred from general marketing language. A transparent comparison records what each supplier has committed to provide. Some contractors also investigate fiber optic cable blowing machine hire when their workload is intermittent. Availability, included accessories, hire duration, responsibility for wear and the cost of extending the booking all influence that calculation. Mentioning hire as a comparison does not mean that Fibernet offers it; request confirmation of the commercial arrangements currently available. A second hand fiber optic cable blowing machine presents a different assessment. Its apparent saving should be weighed against documented condition, maintenance history, component compatibility and the ability to obtain suitable replacement parts. An incomplete accessory set can change the economics considerably. Bringing these alternatives into a purchasing review helps define the value of a new machine without treating the lowest initial expenditure as the only objective. For procurement teams in Italy, the strongest business case links the proposed equipment to expected utilisation, the complete supply scope and realistic operating requirements. Ask Fibernet for a quotation based on those requirements, then compare the documented costs and commitments with your installation plan.

Discuss your installation requirements with Fibernet

Fibernet brings a family-led industrial perspective to the discussion of cable blowing equipment. Founded in 2001, the company draws on the technical background of Giancarlo Trinei, whose work with fibre optic installations began in Italy during the early 1980s. That history provides context for the business, but selecting a blowing machine should still depend on current technical requirements and documented product information. In 2021, Fibernet launched its first cable blowing machine, Lady, marking a specific milestone in its equipment development. For buyers investigating a fiber optic cable blowing machine price, the practical next step is to connect that manufacturing background with the needs of their own installation teams. A productive enquiry can describe one representative job rather than simply asking for the cheapest machine. Explain the cable construction and diameter, the duct dimensions, the anticipated section lengths and the compressor already available, if any. State whether the team typically works from roadside access points, constrained chambers or other locations that affect machine positioning. Describe the frequency of equipment changes and any transport limitations. Where information remains uncertain, identify the uncertainty explicitly so that a quotation does not rest on an unverified assumption. This helps create a more focused exchange between procurement staff, site supervisors and the equipment supplier. If you are considering a pneumatic fiber optic cable blowing machine, ask how the proposed model is powered and how its operating requirements relate to the available site resources. The use of compressed air to help move cable through a duct does not, by itself, establish how every other machine function is driven. Likewise, interest in an electric fiber optic cable blowing machine should lead to questions about the actual power supply requirements and configuration, not an assumption that a particular option is offered. Fibernet can be contacted to establish which current equipment and arrangements are relevant to the enquiry. Before placing an order, request confirmation of the selected configuration, included components, technical documentation and commercial terms. If delivery is required outside Italy, explain the destination early and ask for the applicable shipping arrangements and responsibilities. Do not assume that transport, import costs or local compliance requirements are covered by the equipment figure. For domestic buyers, coordination between the purchasing office and the working crew is equally important: the people using the machine should understand which cable and duct combinations the quotation addresses. Fibernet's family development continued in 2010 with the involvement of Matteo, Marta and Ismael, combining continuity with a new phase of business growth. For customers, that company story is most useful when it leads to a clear, accountable purchasing conversation. Explore the equipment information on the website and submit your installation requirements to request a relevant, clearly scoped quotation.

Still looking for information about fiber optic cable blowing machine price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information