Cable blowing machines · Made in Italy

Looking for "fiber optic cable jetting machine price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable jetting machine quotation should include

A meaningful fiber optic cable jetting machine price starts with the work your team needs to complete, rather than a figure detached from its operating conditions. Cable dimensions, duct internal diameter, route characteristics and the available air supply all influence which equipment configuration deserves consideration. For contractors working across Italy or coordinating installations internationally, the first step is therefore to prepare a clear description of typical jobs. Include the cable outside diameter, relevant cable specifications, duct dimensions, anticipated section lengths and the conditions under which the equipment will operate. These details give a supplier a practical basis for discussing suitability and preparing a quotation without relying on assumptions that could lead to unnecessary purchases or missing accessories. When comparing a cable jetting machine for fiber optic cable installation, look carefully at the boundary between the machine itself and the complete installation setup. A quotation should make clear which guides, seals, cable handling components and connections are included, and which require separate selection. Ask whether changing between your usual cable and duct sizes involves additional parts, how those parts are identified and what information is needed to specify them correctly. Compressor requirements also deserve attention: pressure alone does not describe the suitability of an air supply, because available flow, air quality and the operating limits of every connected component matter. Confirm these requirements against the documentation for the proposed configuration rather than assuming that an existing compressor will be appropriate. A compressed air fiber optic cable jetting machine should be assessed as part of this coordinated arrangement, with suitable hoses, couplings and preparation procedures considered alongside the purchase itself. Fibernet provides a direct point of contact for discussing these requirements. Founded in Italy in 2001, the company draws on the technical background of founder Giancarlo Trinei, whose experience with optical cable installation and testing began in the early 1980s. Its development of cable blowing equipment reached an important milestone in 2021 with the launch of Lady, its first cable blowing machine. For a purchasing team, this background offers useful context, but the quotation should still be grounded in the specific configuration being considered. Ask for a clear description of the proposed machine, included equipment, applicable operating limits and commercial terms. Establish the currency, tax treatment, delivery destination and quotation validity before comparing offers. If the machine will be shipped outside Italy, request clarification of transport responsibilities and any destination requirements that affect the final amount payable. This approach turns a price enquiry into an informed equipment discussion and helps your business budget for a usable installation setup rather than an incomplete headline offer.

Compare acquisition cost with the realities of daily installation

Two quotations can look similar while representing quite different working arrangements. To assess a fiber optic cable jetting machine price properly, connect the initial expenditure with the tasks your crews repeat throughout an installation programme. Consider how equipment reaches the access point, how the machine is positioned, how cables and ducts are prepared, and how adjustments are made between successive sections. None of these factors justifies assuming a particular installation speed or distance. They do, however, provide a practical framework for asking whether a proposed configuration suits your actual work. A compact setup may be useful where access is restricted, while another project may place greater emphasis on accommodating several cable sizes with clearly specified changeover components. Ask the supplier to explain the relevant operating procedure and identify what must be checked before each installation begins. If you are considering an electric fiber optic cable jetting machine, establish the electrical supply requirements, the equipment's intended operating conditions and whether compressed air remains necessary for the proposed installation method. The drive arrangement and the air supply perform different roles, so one should not be treated as an automatic substitute for the other. Where sites have limited access to power, explain those restrictions early rather than selecting equipment on a general description alone. The same care applies when assessing a used fiber optic cable jetting machine. A lower purchase amount needs to be considered alongside documented condition, maintenance history, component wear, missing accessories and access to suitable replacement parts. Check whether the seller can identify the equipment precisely and provide the documentation needed to operate it correctly. Uncertainty in these areas can make an apparently economical purchase harder to evaluate. For either new or previously owned equipment, build a simple ownership comparison around your expected workload. Include acquisition, transport, suitable supporting equipment, consumable components, scheduled maintenance and any inspection requirements identified by the manufacturer. Consider the consequences of downtime without inventing savings or assuming that every interruption can be avoided. Ask how technical enquiries are handled, what information should accompany a service request and which commercial arrangements apply to replacement components. Fibernet's company history combines longstanding technical experience with a subsequent generation of family leadership, following the arrival of Matteo, Marta and Ismael in 2010. For prospective buyers, the useful next step is a focused conversation about the equipment and support relevant to their own operations. Provide examples of representative jobs and ask for written clarification where the quotation leaves a question unanswered. A considered comparison does not simply identify the cheapest machine; it establishes which documented offer best matches the work, resources and purchasing priorities of your business.

Prepare a focused enquiry for your Italian or international project

A well-prepared enquiry helps turn a fiber optic cable jetting machine price request into a quotation that your technical and purchasing teams can assess together. Start with the installation application rather than an assumed machine specification. Describe the cable and duct combinations you regularly use, the range of routes involved and any restrictions affecting access, transport or available utilities. Where possible, provide manufacturer specifications for the cable and duct rather than approximate measurements. Explain whether you need equipment for a continuing programme of installations, an upcoming contract or an expansion of existing capacity. This does not guarantee that one configuration will cover every application, but it gives the supplier a clearer basis for identifying the questions that need answering. If your internal discussion began with fiber optic cable jetting machine rental, separate that commercial preference from the technical requirements. Short project duration, uncertain future workload and limited storage may influence the purchase decision, but rental availability and terms must be confirmed directly with the relevant provider. Do not assume that an equipment manufacturer offers hire simply because a machine suits your application. Likewise, if your team has been considering a drill driven fiber optic cable jetting machine, describe why that arrangement interests you and ask which proposed solutions meet your operating requirements. Compatibility, control and documented limits should guide the discussion, rather than an expectation that different drive arrangements are interchangeable. For customers outside Italy, practical purchasing details should be addressed before an order is finalised. Specify the destination country and delivery location, identify the purchasing entity and explain any documentation requirements imposed by your organisation. Ask the supplier to confirm the proposed delivery terms, packaging arrangements, anticipated availability and responsibilities for import procedures where applicable. Any electrical requirements, documentation language or destination-specific obligations should also be clarified for the exact equipment being offered. Fibernet's Italian origins and ambition to serve an international market provide the background for this discussion, while the confirmed quotation establishes what is actually being supplied. Keep a record of the agreed configuration so that technical approval and purchasing authorisation refer to the same equipment and accessories. Before accepting an offer, resolve any differences between the installation team's expectations and the written specification. Confirm the applicable warranty terms, payment arrangements and process for raising technical questions after delivery. Avoid relying on an assumed installation distance, because actual results depend on the route, cable, duct condition, preparation and operating setup. Contact Fibernet through www.fibernetsrl.com with your application details to begin a quotation discussion. The objective is a clearly defined purchase: equipment selected against real installation requirements, commercial terms understood in advance and a budget based on the agreed scope rather than an isolated advertised figure.

Still looking for information about fiber optic cable jetting machine price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information