Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A search for fiber cable blowing machine hire usually starts with a practical deadline: a duct route is ready, the installation team is scheduled, and the cable must be installed without unnecessary disruption. Before comparing equipment availability, establish what the machine will actually need to do. Cable outside diameter, duct internal diameter, route length, changes in direction and access arrangements all influence the suitability of a proposed configuration. A machine that appears convenient on paper may require different guides, seals or drive components before it can handle your particular cable correctly. Fibernet provides a direct point of contact for discussing cable blowing equipment, helping contractors and telecommunications companies frame their requirements before making a commercial decision. Founded in Italy in 2001, the company introduced its first cable blowing machine, Lady, in 2021, building on technical experience that reaches back to the earliest Italian fibre installations. That background matters when a conversation needs to move beyond an equipment name and address the working conditions on site. When preparing an enquiry about a cable blowing machine for fiber optic cable installation, include the cable manufacturer's handling limits as well as the nominal dimensions. Permissible pushing force, minimum bend radius and any installation restrictions help define an appropriate operating approach. Describe the duct condition, too: newly installed sections, existing routes, suspected contamination and uncertain continuity present different preparation requirements. Compressed air must be assessed as part of the complete arrangement rather than treated as an unlimited resource. Available pressure, delivered airflow, connection sizes and air quality should be checked against the selected machine and the planned installation procedure. These checks do not establish a guaranteed installation distance, but they make equipment discussions substantially more useful. If you are comparing fiber optic cable blowing machine hire options, clarify exactly what the proposed package contains. Ask whether the necessary cable guides, duct adaptors, seals and connection accessories are included, and establish who is responsible for confirming their compatibility. Delivery dates, collection arrangements, cleaning requirements and the procedure for reporting damage should also be agreed before the machine reaches the site. For projects in Italy or overseas, send Fibernet a concise technical brief and ask which equipment arrangements can be discussed for your location. Hire availability, geographical coverage and commercial conditions should be confirmed directly rather than assumed. The objective is a clear specification that supports a realistic decision: equipment matched to the cable and duct, a workable air supply, and responsibilities understood by everyone involved before installation begins. This preparation also gives purchasing teams a sound basis for comparing quotations without overlooking essential accessories or practical site constraints.
The daily or weekly rate is only one part of the cost behind fiber cable blowing machine hire. For a contractor managing several work fronts, the more useful question is how much it will cost to make the equipment available, correctly configured and ready for productive work throughout the required period. Transport, accessories, compressor arrangements and the consequences of an interrupted programme can change the comparison considerably. Begin with a realistic schedule that distinguishes installation days from delivery, site preparation, testing and return transit. If the duct route will not be ready when the equipment arrives, the hire period may be consumed without any cable being installed. Equally, an optimistic return date can create avoidable pressure if access permissions or other site activities change. Ask any prospective supplier how extensions are handled and whether charges apply to weekends, delayed returns or equipment awaiting collection. Written clarification is more valuable than a low headline rate with uncertain conditions. When assessing a fiber cable blowing machine price alongside a temporary equipment arrangement, compare equivalent configurations. A purchase quotation containing the necessary guides and adaptors cannot be meaningfully compared with a hire offer that excludes them. Establish the required cable and duct combinations first, then identify the components needed for each planned job. If several cable diameters will be installed during the same period, confirm how configuration changes are performed and whether additional components must be ordered in advance. Maintenance responsibilities also deserve attention. Ask which routine checks belong to the operator, what cleaning is expected after use and how a technical problem should be reported. Do not assume that repairs, replacement equipment or transport following a breakdown are automatically included. For businesses considering a used fiber cable blowing machine as an alternative, condition and configuration become central to the calculation. Request evidence of maintenance, inspect wearing parts and verify that essential components remain available. A lower purchase cost may be less attractive if the machine requires refurbishment or cannot accommodate the intended cable without further expenditure. Conversely, repeated installations over an extended programme may justify investigating ownership rather than arranging equipment separately for each contract. Fibernet can be contacted to discuss its cable blowing equipment and obtain information relevant to that evaluation; current purchase terms, any available hire arrangements and destination requirements need direct confirmation. Share the expected workload, installation locations and planned equipment utilisation instead of asking for a number without context. A well-prepared enquiry allows the discussion to focus on the configuration you need and the commercial details that matter. It also helps your team compare alternatives transparently, with transport, accessories, operating requirements and potential downtime considered alongside the initial quotation.
Successful equipment planning continues after a quotation has been accepted. For teams investigating fiber cable blowing machine hire, the handover between purchasing staff and the installation crew is particularly important: the people booking the machine may not be the people connecting it to the duct. Give the site supervisor the agreed configuration, operating documentation and contact details before delivery, and make sure the actual cable and duct dimensions match those used during the enquiry. Any substitution should trigger another compatibility check rather than an assumption that the original setup will still work. At the work area, position the cable drum so that the cable can feed towards the machine without tight bends or unnecessary resistance. Provide stable support for the equipment and organise hoses so that they do not create trip hazards or interfere with moving parts. The operator should be able to observe the cable feed and reach the relevant controls without stepping across an obstructed work zone. A compressed air fiber cable blowing machine requires particular attention to connections and isolation procedures. Hoses, fittings and other pressurised components must be suitable for the operating conditions specified in the relevant documentation. Connections should not be loosened while pressurised, and preparation or adjustment must follow the manufacturer's safety instructions. Route preparation is equally significant. Confirm duct continuity and condition using procedures suitable for the particular installation, and investigate unexpected resistance instead of trying to overcome it through progressively higher settings. Cable handling limits remain applicable throughout the operation. Keep communication clear between personnel at the feeding point and any receiving or intermediate access locations, with an agreed method for stopping work immediately if a problem occurs. Useful job records include the equipment configuration, route identification, installed length and observations made during operation. Such records help distinguish an equipment issue from a duct obstruction or an unsuitable cable feed arrangement when reviewing an interrupted installation. For an overseas project, discuss documentation language, delivery responsibilities and the process for obtaining technical assistance before equipment is dispatched. Fibernet is an Italian company with an ambition to serve the international cable blowing equipment market, and customers can contact the team with project specifications and destination details. Its development of the Lady machine reflects a practical focus on equipment used by installation crews, but suitability must still be checked for each proposed application. If your enquiry concerns an optical fiber cable blowing machine, include photographs or drawings where they clarify access limitations or unusual working arrangements. Ask what information is needed to assess the setup, and obtain written confirmation of the equipment scope and any agreed support. Bringing these details together early helps the crew arrive with fewer unresolved questions and a clearer plan for carrying out the work safely.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.