Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Searching for a fiber cable blower on rent usually starts with a practical requirement: your team needs to install a particular cable within a defined working period, without committing immediately to equipment ownership. Before comparing quotations, establish whether the proposed machine actually suits the installation. Cable diameter, duct internal diameter, cable construction and the condition of the route all influence the selection. A blower that accepts the cable mechanically is not automatically the right choice for every duct arrangement or working environment. Fibernet provides a manufacturer contact point for discussing these requirements and understanding which equipment characteristics deserve attention. Rental availability, commercial arrangements and delivery possibilities should be confirmed directly rather than assumed from a search term. When preparing your enquiry, include the cable and duct specifications, expected installation dates, project location and approximate route lengths. Explain whether the work involves repeated short sections, longer continuous runs or routes with several changes of direction. These details help frame a more useful technical conversation than simply asking for a daily rate. A cable blower for fiber optic cable installation must combine suitable cable guidance with controlled feeding and an appropriate air connection. The exact arrangement depends on the machine, so request its documented operating limits and the accessories required for your application. Check which cable guides, duct fittings and seals are included, and which must be specified separately. Incorrectly matched accessories can create avoidable delays even when the main machine appears suitable. Air supply also deserves early consideration. Ask for the required pressure and airflow under the intended operating conditions, then compare these figures with the compressor available on site. Pressure alone does not establish whether a compressor can maintain the airflow needed during blowing. Hose selection, connections and air preparation may also affect the overall setup. If your search began with fiber optic cable blower on rent, use the enquiry to clarify the complete working package rather than just the machine itself. Identify responsibilities for transport, inspection, consumable items and any support required during the agreed period. For contractors working in Italy, access restrictions and the space available around the duct entry can influence equipment placement and handling. International enquiries should additionally identify the destination and required arrival date so that feasible supply arrangements can be discussed. Clear information at this stage supports a realistic equipment assessment and reduces the likelihood of discovering a compatibility problem after the installation team has already reached the site. It also gives your purchasing team a stronger basis for comparing proposals that may otherwise describe very different scopes of supply.
A short installation programme can make temporary equipment access attractive, but the quoted rental charge is only one part of the decision. To assess a fiber cable blower on rent, begin with the actual number of working days and distinguish them from transport days, preparation time and possible interruptions. A machine booked for a compact programme may remain unused if the duct route is not ready, access permissions are delayed or the compressor arrives late. Establishing a realistic schedule helps you compare temporary access with ownership on a consistent basis. Ask whether the proposed charge includes the fittings needed for your cable and duct sizes, and clarify how additional accessories are priced. Transport, collection, insurance, cleaning, damage liability and late return conditions can materially change the overall amount payable. These points should be documented in the commercial proposal rather than left to informal assumptions. A useful comparison also considers the work expected after the current project. If similar installations recur regularly, reviewing the fiber cable blower price alongside the cumulative cost of repeated hire can reveal whether purchasing deserves closer consideration. Ownership brings its own responsibilities, including maintenance, storage and the availability of trained operators, so neither option is automatically better. The relevant question is which arrangement supports your workload with an acceptable combination of cost, availability and operational control. For a company managing several crews, equipment scheduling may matter as much as the initial expenditure. A shared machine can become a constraint if two sites need it simultaneously. Conversely, buying equipment for a single isolated requirement may leave capital tied up in an asset that sees little subsequent use. Discuss your expected pattern of use with Fibernet and request information relevant to the machines under consideration, without assuming that a particular rental programme or financial arrangement is available. Technical suitability must remain central to the comparison. A lower headline charge offers little benefit if the package lacks the correct seals or requires a different air supply from the one planned. When reviewing a compressed air fiber cable blower, confirm the machine requirements against the compressor specification and include any necessary air preparation equipment in the budget. Do not base anticipated output on an advertised distance alone: route geometry, duct condition, cable characteristics and operating practice all affect results. For international projects, clarify the proposed delivery terms and any applicable customs responsibilities before calculating the total cost. Italian customers should likewise verify transport timing against site access and crew availability. A detailed enquiry allows the commercial discussion to address the complete installation requirement, helping you compare equipment proposals transparently instead of selecting solely on the smallest visible daily figure.
Reliable preparation matters whether the machine is hired for a single assignment or purchased for repeated use. Once you have identified a possible fiber cable blower on rent, turn the enquiry into a practical readiness checklist covering the machine, its accessories and the people responsible for operating it. Request the relevant operating documentation and review the setup procedure before the equipment reaches the worksite. Operators should understand the controls, cable feeding adjustments, emergency stopping procedure and the limits specified by the manufacturer. Familiarity with another machine does not replace checking the instructions for the actual model supplied. Confirm how the equipment will be received and inspected. Record the machine identification, supplied fittings and visible condition, and verify that the components match the agreed package. Any missing or damaged parts should be reported before work begins. For a temporary arrangement, a clear handover record also helps distinguish pre-existing wear from issues arising during use. Site preparation should focus on the conditions that directly affect blowing. Check that the duct route has been assessed using suitable procedures and that the entry arrangement allows the machine to be secured as instructed. Plan cable drum positioning so the cable can feed smoothly without unnecessary resistance or uncontrolled movement. Keep the working area organised and establish communication between the people monitoring the feed and those responsible for the route. When using a pneumatic fiber cable blower, follow the specified precautions for compressed air, connections and depressurisation before making adjustments. Never treat increased pressure or feeding force as a universal answer to poor progress. Unexpected resistance calls for a controlled stop and investigation in accordance with the operating instructions. Recording the setup and any interruptions can help the team identify recurring problems across successive installation sections. Fibernet's background offers context for a technical discussion about equipment selection. Founded in 2001, the company builds on founder Giancarlo Trinei's experience with early Italian cable installations and introduced its first cable blowing machine, Lady, in 2021. These facts describe the manufacturer's development; they do not establish rental stock, guaranteed installation distances or specific support response times. Ask directly what assistance, documentation and supply arrangements can be provided for your destination and schedule. If you are comparing a used fiber cable blower with temporary access to another machine, assess documented condition, accessory completeness and maintenance information rather than appearance alone. Before the final decision, assign responsibility for routine checks, consumable replacement and reporting operating concerns. At the end of the project, follow the agreed cleaning, inspection and return requirements where applicable. This structured preparation helps contractors keep the equipment decision connected to safe working practices, predictable handovers and the real demands of the planned installation.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.