Cable blowing machines · Made in Italy

Looking for "fiber cable blower hire"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the job, not just the hire period

A search for fiber cable blower hire usually starts with a practical problem: a cable installation is scheduled, the ducts are ready, and the team needs suitable equipment without committing immediately to ownership. Before comparing availability or daily rates, establish exactly what the machine must handle. Cable outside diameter, duct internal diameter, cable construction, route length and the number of bends all influence equipment selection. A machine that appears suitable on diameter alone may still require different guides, seals or drive components for the actual cable. For contractors working in Italy, these checks are particularly useful when equipment must move between sites with different duct specifications and access conditions. Fibernet provides a manufacturer contact for discussing cable blowing requirements; any hire arrangement, availability or commercial terms should be confirmed directly rather than assumed. Selecting a cable blower for fiber optic cable installation also requires a realistic picture of the working environment. Explain whether the installation starts from a chamber, a roadside enclosure or another restricted position, and describe the space available for the machine, cable drum and compressor. The cable must feed smoothly into the machine without sharp changes of direction or unnecessary resistance. Drum positioning, controlled payout and a clear communication procedure between operators can matter as much as the machine itself. Before mobilisation, check duct continuity, cleanliness and suitability for pressurised installation using the procedures specified for the duct system. Confirm that couplings and closures are appropriate for the intended operating conditions. Where a compressed air fiber cable blower is being considered, ask about the required air delivery, allowable pressure and air preparation rather than choosing a compressor on pressure rating alone. Moisture, contamination and insufficient airflow can compromise the installation process. Operating limits must come from the relevant machine, cable and duct documentation; a longer route is not a reason to exceed them. A useful enquiry therefore includes the cable and duct data sheets, estimated route geometry, available compressor specifications, anticipated working dates and the destination of the equipment. Photographs of the proposed setup can help clarify access restrictions and cable entry arrangements. Request written confirmation of the compatible configuration, included accessories and any consumables that need separate provision. If temporary equipment access is available, establish who checks the machine before dispatch and what condition is expected on return. This preparation makes the commercial discussion more meaningful: instead of asking only whether a machine is available, your team can assess whether the proposed equipment is actually appropriate for the installation and whether the full package will be ready when work begins.

Assess the full cost of temporary equipment access

The apparent economy of fiber cable blower hire depends on more than the amount charged for each working day. A fair comparison considers the complete period for which equipment is required, including transport, site preparation, weather disruption, access delays and return arrangements. A short installation can become an expensive booking if the machine arrives before the duct route is ready or remains on site while another activity blocks progress. Build the equipment schedule around confirmed readiness rather than the earliest possible delivery date. For teams operating across several Italian regions, also allow for movement between sites and identify who is responsible for packaging, loading and checking the machine at each transfer. Ask for an itemised commercial proposal wherever temporary access is offered. Useful points to clarify include the minimum booking period, delivery and collection charges, deposit requirements, responsibility for damage, inspection procedures and the treatment of missing accessories. Establish whether guides, seals and other cable specific components are included or priced separately. Compressor provision should be checked independently unless the proposal explicitly includes it. Do not assume that technical assistance, replacement equipment or extended use during a delay forms part of the agreement. Written answers make it easier to compare proposals on equivalent terms and reduce misunderstandings when the installation schedule changes. Contractors researching fiber optic cable blower hire should also consider how frequently the equipment will be used after the immediate project. Temporary access may suit occasional work or an unfamiliar installation requirement, while repeated bookings can justify a purchase assessment. Comparing the fiber cable blower price with hire expenditure is useful only when both sides include equivalent equipment configurations and realistic operating costs. Ownership introduces maintenance, storage and internal equipment management, but may offer greater control over scheduling. Temporary access reduces some ownership commitments, yet depends on availability and the conditions of the individual agreement. Neither option is automatically better for every contractor. Fibernet can be approached with the technical and commercial context needed to discuss its cable blowing equipment, without assuming that a rental service or a particular finance arrangement is available. Prepare a simple forecast showing expected installation days, likely gaps between projects and the cable sizes your teams encounter most often. Include the cost of delays caused by unsuitable equipment or missing setup components, rather than comparing headline rates alone. Before accepting any offer, agree how faults will be reported, which checks operators must perform and who authorises repairs or adjustments. A sound decision protects the installation programme as well as the budget: the objective is dependable access to correctly configured equipment, with clear responsibilities and no uncertainty about what the quotation actually covers.

Speak to an Italian manufacturer with your installation specifications

Behind every productive cable blowing operation is a match between the equipment, the installation conditions and the people using it. Fibernet approaches this market from a technical background rooted in Italy. Founded in 2001, the company developed from Giancarlo Trinei's experience with early Italian fibre installations during the 1980s. Its development in cable blowing equipment reached a significant milestone in 2021 with the introduction of Lady, its first cable blowing machine. For a contractor investigating fiber cable blower hire, this background provides a reason to seek a technical conversation rather than relying solely on a generic equipment listing. The next step is to establish which current machine configuration, if any, matches the intended work and what commercial options Fibernet can actually offer. An effective discussion starts with measurable requirements. Provide the cable manufacturer's handling limits, the duct dimensions, the expected route profile and the operating environment. Describe any changes in elevation, tight working spaces or restrictions on placing the compressor near the cable entry point. If your team is evaluating a pneumatic fiber cable blower, request the applicable operating instructions and clarify the relationship between air supply, machine settings and permitted cable loading. These details should be assessed for the specific equipment rather than inferred from a general product category. Ask which adjustments are intended for routine operator use and which interventions require authorised technical attention. Clear boundaries help prevent improvised changes that could damage the cable or affect safe operation. Equipment condition deserves equal attention when considering temporary access or a used fiber cable blower. Request information on maintenance history, wear components, protective features and the checks performed before the machine is supplied. Inspect cable contact surfaces and verify that the supplied parts correspond to the proposed cable and duct combination. Obtain the relevant documentation and confirm how replacement wear items can be identified. A machine should not be judged solely by appearance or a brief demonstration without a representative setup. Any trial should follow the manufacturer's procedures and use suitable materials under controlled conditions. Fibernet's family business has also developed through a generational transition that began in 2010, bringing Matteo, Marta and Ismael into the company. Its stated ambition is to build an Italian manufacturing presence with international reach. For customers in Italy and English speaking teams elsewhere, practical purchasing discussions should therefore cover destination requirements, documentation, delivery arrangements and access to technical support, with each point confirmed for the actual order. Submit your project information through www.fibernetsrl.com to request a focused discussion about cable blowing equipment. Whether your original enquiry concerns temporary access or a longer term investment, a specification led conversation is the most useful starting point for identifying an appropriate solution without assuming availability, performance or contractual terms.

Still looking for information about fiber cable blower hire?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information