Cable blowing machines · Made in Italy

Looking for "fiber blowing machine rental"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Start with the cable, duct and working conditions

Choosing fiber blowing machine rental starts with understanding the installation, not simply finding equipment for a particular date. Contractors working on Italian sites need a machine configuration that suits the cable, the duct and the conditions along the proposed route. Before discussing availability with Fibernet, prepare the cable outer diameter, duct internal diameter, intended section lengths and any information about bends, gradients or intermediate access points. Include the cable manufacturer's installation limits, particularly the permitted pushing force and minimum bend radius. These details help establish what needs checking before equipment is selected, reducing the risk of arriving on site with an unsuitable configuration or missing accessories. A useful enquiry also describes the compressed air supply. Compressor pressure alone does not establish suitability: available airflow, air quality, connection arrangements and the requirements of the selected machine all matter. Ask which compressor specifications apply to the proposed configuration rather than assuming that an existing unit will be adequate. Where relevant, discuss moisture management and compatible lubrication, following the equipment and cable manufacturers' instructions. The duct should also be assessed before blowing begins. Obstructions, leaking connections or damaged sections cannot be solved merely by increasing the machine settings. Route preparation and appropriate checks therefore belong in the installation plan, alongside equipment selection. When comparing fiber cable blowing machine rental options, examine what the proposed package actually includes. Cable guides, duct connection components, seals and drive components may need to match specific dimensions. Confirm the supplied items in writing, together with any consumables or additional equipment that must be arranged separately. Access conditions deserve equal attention: the working area must accommodate the machine, cable drum and compressor connections while allowing the crew to operate safely. Explain whether the job involves roadside chambers, restricted spaces or frequent movement between short sections. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on the company's technical background. For a contractor considering a fiber blowing machine, that manufacturer perspective provides a useful starting point for discussing compatibility and practical requirements, without treating headline performance figures as guaranteed site results. Actual installation distance and speed depend on the complete combination of cable, duct, route preparation, air supply and operating conditions. Send Fibernet a clear project brief through its website and ask which equipment options can be considered. Rental availability, applicable locations, package contents and commercial terms should all be confirmed directly before scheduling the installation team. This approach turns an initial enquiry into a technical discussion and helps procurement staff and site supervisors work from the same assumptions.

Assess the full cost of temporary machine access

A short installation programme can make temporary access to equipment worth investigating, but the quoted hire charge is only one part of the decision. For fiber blowing machine rental, the useful comparison is the total cost of completing the planned work with an appropriate configuration. Begin with the expected installation days, then allow for delivery, site preparation, weather interruptions where relevant, transfers between work areas and the return process. Ask when the chargeable period begins and ends, whether minimum periods apply, and how extensions are agreed. These questions are particularly important when a contractor's blowing schedule depends on duct preparation being completed by another team. An apparently economical booking can become less attractive if the machine arrives before the route is ready. Request an itemised proposal rather than assuming that every accessory, transport movement or support service is included. Clarify responsibility for consumables, cleaning, damage, insurance and any required deposit. The agreement should explain the condition expected on return and the process for reporting a problem during use. If the machine needs a separately sourced compressor, include that cost and check technical compatibility before committing to either booking. Labour planning also affects the comparison. A machine that suits the cable and duct but requires unfamiliar operating procedures may demand additional preparation time. Ask what operating documentation is supplied and what support arrangements, if any, apply to the proposed agreement. Do not assume that a particular response time or replacement machine is included unless this is expressly confirmed. For businesses with recurring installation work, a fiber blowing machine price enquiry can provide a useful purchase benchmark alongside temporary access. Compare ownership against realistic utilisation rather than a single busy month. Storage, maintenance, transport, accessory requirements and the responsibility for keeping equipment ready for use should be included in that assessment. Conversely, an uncertain pipeline of suitable projects may make it sensible to explore temporary arrangements before purchasing. A second hand fiber blowing machine represents another possible comparison, but its condition, service history, included components and suitability require their own checks. A lower acquisition figure does not establish equivalent capability or lower operating risk. Fibernet can be contacted to discuss machine requirements and the commercial options currently available; the supplied company information does not establish a standard rental tariff or universal rental service. For projects in Italy or enquiries from overseas, confirm location-specific availability, transport arrangements and contractual conditions directly. A well-prepared comparison gives purchasing teams a defensible basis for their decision: equipment suitability first, complete costs second, and a clear understanding of responsibilities throughout the proposed working period.

Prepare the handover before the machine reaches site

The most useful equipment enquiry often comes from a conversation between the person placing the order and the supervisor who will manage the installation. Procurement may know the dates and budget, while the site team understands access restrictions, drum positioning and the condition of the prepared ducts. Bringing those details together makes fiber blowing machine rental discussions more productive. Create a short technical handover sheet containing cable dimensions, duct dimensions, route sections, compressor details and the planned working location. Record any uncertainties explicitly. An unknown cable installation limit or an unverified duct condition should trigger a check, not an assumption that the machine can compensate. Once a suitable arrangement has been proposed, ask for confirmation of the exact equipment configuration and the documents that accompany it. The receiving crew should know how to identify the supplied components, check their condition and report discrepancies before work begins. Agree who will receive the equipment, where it can be unloaded and how it will be moved to the operating position. For roadside work in Italy, equipment planning must fit the site's access arrangements and applicable safety procedures; hiring machinery does not replace the contractor's responsibility to organise a safe working area. Keep the cable feed path controlled and follow the relevant operating instructions when setting up and adjusting the machine. During installation, useful records include the section being worked, cable and duct identification, relevant settings, interruptions and any observed difficulty. These records support consistent handovers between operators and help distinguish equipment questions from route-related problems. If progress becomes abnormal, the crew should follow the manufacturer's stop and inspection procedures rather than increasing force or pressure without understanding the cause. An optical fiber cable blowing machine operates as part of a wider installation setup, so troubleshooting should consider cable feed, duct condition, connections and compressed air supply together. Before returning hired equipment, follow the agreed cleaning and packing requirements and document its condition. Report wear, damage or operating concerns through the agreed channel so that there is a clear record for both parties. Contractors comparing fiber optic cable blowing machine rental proposals should also check how collection delays, unfinished sections and requests for additional time are handled. Fibernet's background provides context for these technical conversations: the company was founded in 2001, and founder Giancarlo Trinei's experience with optical fibre installations dates to the early 1980s. Its development of Lady reflects a subsequent focus on cable blowing equipment. Contact Fibernet with your project details to establish what can currently be offered for your location, including any applicable delivery arrangements. Confirm all availability and service commitments in writing before treating them as part of the installation programme.

Still looking for information about fiber blowing machine rental?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information