Cable blowing machines · Made in Italy

Looking for "drill powered optical fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match the blowing machine to the work ahead

Choosing a drill powered optical fibre cable blowing machine starts with the cable and duct combination, not with an assumed installation speed. For contractors working on Italian sites or coordinating installation teams internationally, the useful question is whether the proposed equipment suits the actual conditions underground. Cable diameter, duct internal diameter, route length, bends and changes in elevation all influence the installation. Fibernet provides a point of contact for discussing these requirements against its cable blowing machine range, allowing buyers to request model-specific information before making a purchasing decision. Bring the details of your planned installations to that conversation rather than relying on a machine description alone. A drill-driven arrangement uses a compatible drill to provide mechanical drive, while compressed air assists the cable through the duct. The drill therefore does not replace the air supply. Buyers should establish which drill characteristics are required, whether an adaptor is included, how the drive is controlled and which compressor conditions the selected configuration needs. These points must be checked against the relevant equipment documentation; they cannot safely be inferred from the general category name. When assessing a drill driven optical fibre cable blowing machine, also ask how the feeding mechanism accommodates the intended cable without exceeding the cable manufacturer's handling limits. Grip must be appropriate to the jacket and diameter, while the installation procedure must account for permitted pushing forces and bend radii. Excessive drive force is not a substitute for a clear, correctly prepared duct. A practical enquiry should include the smallest and largest cables you expect to install, the corresponding duct dimensions and the nature of your typical routes. Explain whether crews frequently move between short sections, work around restricted access points or need to transport equipment between several sites during a shift. These details help frame questions about dimensions, weight, assembly and compatible accessories without assuming that every model has identical capabilities. Before ordering, request confirmation of what the quoted package contains. A machine, cable guides, seals, drill interface and air connection components should not be assumed to form one universal package. Clarify which items are standard, which are optional and which must be sourced separately. Finally, distinguish an indicative capability from a guaranteed result on your own route. Installation distance depends on the complete working system and site preparation, not merely the drive method. A well-specified drill powered optical fibre cable blowing machine should be evaluated as part of that system. Discussing these factors with Fibernet gives your purchasing team a clearer basis for comparing suitable configurations and preparing a technically meaningful quotation request.

Prepare the duct, control the feed and protect the cable

Good cable blowing results begin before the machine is switched on. Crews need a prepared route, compatible components and an agreed operating procedure. Start by confirming that the duct is suitable for blowing, correctly joined and free from conditions that could obstruct the cable. Check the applicable duct and cable documentation, then complete any cleaning, continuity and integrity checks required by the installation method. Where lubricant is specified, use a product compatible with the cable jacket, duct material and equipment instructions. Adding an unsuitable lubricant or ignoring contamination can undermine an otherwise sensible equipment choice. Position the drill powered optical fibre cable blowing machine so that cable enters along a controlled path without sharp changes in direction. The cable supply should turn freely and remain supervised, with enough working space to prevent loops from snagging on nearby equipment. Keep the area around the feeding mechanism clear and follow the manufacturer's requirements for guards, clothing and personal protective equipment. Before introducing compressed air, check the hoses, couplings and connections for compatibility and condition. Never disconnect a pressurised connection; isolate and depressurise the system according to the equipment instructions first. During the initial feed, the operator should observe cable movement and adjust settings only within the documented limits. More drill speed does not automatically mean faster useful progress. If the cable hesitates, slips or stops, continuing to increase drive can damage the jacket or cause buckling. Stop and investigate the cause using the prescribed procedure. Possible issues include an unsuitable guide, incorrect adjustment, an air leak, excessive route resistance or a problem with the duct itself. A battery powered optical fibre cable blowing machine may appeal to teams seeking cordless operation of the drive, but that description alone does not establish independence from compressed air. When comparing arrangements, separate the source of mechanical drive from the air supply requirements. This distinction helps crews plan compressor access and avoids arriving on site with an incomplete working setup. For a drill powered optical fibre cable blowing machine, battery readiness and drill compatibility are additional preparation points where a cordless drill is specified. Charge the appropriate batteries, inspect the drill and verify the required operating mode before starting. Keep records of the cable and duct dimensions, route characteristics, equipment settings and observed installation behaviour. Those records can help identify why one section progressed smoothly while another required investigation. At the end of the shift, clean and inspect the machine as directed, paying attention to contact surfaces and consumable components. Consistent preparation and controlled operation give contractors a sounder foundation for repeatable work than relying on headline speed figures or attempting to force a difficult section.

Build a purchasing specification with Fibernet

For a contractor buying equipment for repeated installation work, the purchase decision extends beyond the initial machine cost. The relevant comparison includes the working configuration, replacement components, maintenance requirements and the ability to obtain clear technical information. An enquiry about optical fibre cable blowing machine price becomes more useful when it describes the work the equipment must perform. Send Fibernet your cable diameter range, duct dimensions, typical route conditions and available compressor details. Include any drill you intend to use, but ask for compatibility confirmation rather than assuming an existing tool will suit the proposed machine. Request a quotation that separates the core equipment from accessories and identifies any components needed for different cable sizes. If multiple crews will use the equipment, explain whether they work with a consistent cable and duct combination or encounter several combinations each week. This can change the questions worth asking about changeover procedures, consumables and the contents of each crew's equipment package. Also establish what documentation accompanies the proposed configuration and which routine checks operators are expected to complete. Fibernet was founded in 2001, building on the technical experience of Giancarlo Trinei, whose work with optical fibre began in Italy in the early 1980s. The company introduced its first cable blowing machine, Lady, in 2021. That history provides context for a direct discussion with a business developing equipment for this specialist application. It does not replace model-specific verification: the suitability of any drill powered optical fibre cable blowing machine still depends on its documented configuration and your installation requirements. The family's continuing involvement includes Matteo Trinei as CEO, alongside the generational transition that began in 2010. For international buyers, practical purchasing questions deserve as much attention as the technical specification. Ask Fibernet to confirm availability, delivery arrangements for your destination, transport costs and the applicable commercial terms. Establish which documents are supplied and whether any destination-specific requirements need further review before dispatch. Do not assume that a quotation automatically includes every cost associated with importing or putting equipment into service. Maintenance planning should also be discussed before purchase. Ask which parts are subject to wear, how replacement components are identified and what information is needed when requesting assistance. A clear record of the machine configuration can simplify future enquiries and reduce uncertainty when ordering compatible items. Where downtime would disrupt several crews, consider your internal arrangements for inspections and the availability of essential consumables. The objective is a purchase based on a defined working requirement, not a general category label. Contact Fibernet through www.fibernetsrl.com to explain your intended application and request confirmation of the appropriate equipment, package contents and quotation details.

Still looking for information about drill powered optical fibre cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information