Cable blowing machines · Made in Italy

Looking for "drill powered fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around your installation conditions

Choosing a drill powered fibre cable blowing machine starts with the installation conditions, not simply the size or appearance of the equipment. For contractors working on duct routes in Italy or preparing projects overseas, the essential question is whether the proposed configuration suits the cable, duct and available compressed air supply. Cable outside diameter, duct internal diameter, route length, changes in direction and the condition of existing ducts all influence the installation process. A useful enquiry therefore begins with actual measurements and a clear description of the intended work. Fibernet provides a direct point of contact for businesses evaluating cable blowing equipment, with a company background rooted in practical technical experience and an ambition to develop machines that simplify the operator’s work. In a typical drill driven fibre cable blowing machine configuration, the drill supplies mechanical drive while compressed air assists cable movement through the duct. These functions must be considered together: the drive arrangement does not replace the need to assess air delivery, sealing and route suitability. Before selecting equipment, ask which cable and duct dimensions are supported, which components are needed for each combination, and what requirements apply to the drill connection. Understanding these details helps prevent a purchasing decision based on an incomplete description. The same care applies when comparing a drill powered fibre optic cable jetting machine with other cable blowing options. Terminology alone does not establish performance, compatibility or the accessories supplied. Request the relevant technical documentation and check how the proposed machine controls cable feeding, accommodates dimensional changes and allows the operator to respond if movement becomes irregular. On site, preparation should include checking duct continuity, assessing cleanliness and confirming that connections and closures are suitable for the intended procedure. Compressed air equipment should be selected according to the machine documentation rather than an assumed pressure figure. Cable handling also deserves attention: a poorly positioned reel or excessive resistance before the machine can undermine an otherwise suitable arrangement. Agreeing a practical setup before work begins helps the crew organise access, position equipment safely and reduce avoidable interruptions. When you contact Fibernet, describe whether your team undertakes repeated short installations, mixed routes or projects with restricted working space. Include any limitations affecting transport, compressor placement or access to the duct entry point. This information creates a more useful discussion than requesting a machine by keyword alone. The aim is to identify equipment appropriate to the application, clarify the configuration offered and establish which operational details must be verified before the installation starts. A carefully specified purchase gives contractors a clearer basis for planning work, allocating resources and evaluating the suitability of their cable blowing equipment.

Prepare the complete working setup, not just the machine

A cable blowing operation depends on the relationship between the machine, its drive source, the compressed air system and the prepared duct route. Treating these as a complete working setup helps purchasing teams ask better questions and gives site supervisors a more realistic basis for planning. When evaluating a drill powered fibre cable blowing machine, begin by distinguishing between the energy used to drive the feed mechanism and the air needed for the blowing process. A cordless drill may offer a convenient drive source in an appropriate configuration, but that does not mean the installation operates without a compressor. Likewise, the expression battery powered fibre cable blowing machine should prompt a precise technical discussion rather than an assumption about the entire system. Confirm exactly which part is battery powered, which external services remain necessary and whether the proposed arrangement is approved for the intended machine. Drill suitability should be established from the equipment documentation, including any specified requirements for connection, operating mode and speed control. Do not assume that a drill already carried by the crew will be compatible. Ask how the drive interfaces with the machine and which operating precautions apply. The cable contact components also need attention. Their purpose is to transfer movement without exposing the cable to inappropriate loading, so correct selection and adjustment matter. Operators should follow the manufacturer’s procedure rather than attempting to overcome a difficult route by increasing force. Before work begins, establish how the team will monitor progress and recognise conditions that require a controlled stop. Unexpected resistance, inconsistent feeding or a change in cable behaviour should trigger investigation rather than continued pushing. A structured preparation routine can include checking the cable reel arrangement, inspecting the accessible cable surface, verifying duct connections and confirming that the required adapters and seals are available. Where lubrication is appropriate, its selection and application should follow the relevant cable, duct and equipment guidance. For a contractor considering a drill powered optical fibre cable blowing machine, these operational questions are often more useful than an isolated headline speed. Achievable distance and progress depend on several interacting conditions, so request performance information together with the circumstances in which it applies. Maintenance requirements should also form part of the discussion. Ask which inspection, cleaning and replacement tasks are described for the proposed equipment, and how consumable or wearing components can be identified when ordering replacements. Keeping installation records can help teams recognise recurring problems with particular routes or setups without attributing every difficulty to the machine. Fibernet’s technical heritage makes practical application requirements a relevant starting point for an enquiry. Share the details of your planned installations and request clarification on configuration, documentation and preparation before deciding which equipment belongs in your working setup.

Discuss your project with an Italian cable blowing equipment company

Fibernet was established in 2001, bringing together family values, technical experience and the ambition to become a recognised international reference for cable blowing machines. Its founder, Giancarlo Trinei, began working with fibre installations in the early 1980s and contributed to installation and testing activities during the development of Italy’s early networks. That background matters to a buyer when it supports a practical conversation about the problems equipment must solve: feeding cable consistently, preparing an appropriate working arrangement and avoiding unnecessary complexity for the crew. The company’s development reached an important milestone in 2021 with the launch of its first cable blowing machine, Lady. This history provides context for Fibernet’s work, but selecting a drill powered fibre cable blowing machine still requires verification of the specific model and configuration offered. Buyers should not infer drill compatibility, cable capacity or operating limits from a company introduction or product name. Instead, use the initial enquiry to establish what is available for the intended application and request the documentation needed for an informed comparison. For purchasing managers, a useful assessment of fibre cable blowing machine price considers more than the initial equipment figure. Clarify which components are included, whether additional cable or duct configurations require separate items, and what supporting equipment must be sourced independently. Ask about the scope of any quotation, applicable commercial terms, replacement components and the arrangements available for technical questions. For projects outside Italy, confirm delivery options, destination requirements and the documentation supplied with the proposed machine. International procurement is easier to plan when these points are settled before an order rather than after equipment has been allocated to a site. Businesses comparing a drill driven optical fibre cable blowing machine should also consider how easily the proposed configuration fits their existing working practices. A team handling several cable sizes may prioritise configuration changes, while another may focus on transport arrangements or the availability of suitable compressed air equipment. These are different operational needs, and a meaningful recommendation depends on knowing which applies. Fibernet’s generational transition began in 2010, when Matteo, Marta and Ismael joined the business, supporting continued development while preserving its founding values. Under Matteo Trinei’s leadership, the company expresses a clear commitment to Italian identity and international growth. For customers, the most useful next step is a focused conversation rather than a general enquiry. Provide cable and duct dimensions, expected route characteristics, the intended drive source and the country where the equipment will be used. Explain whether you need a first machine or an addition to an established installation fleet. Explore www.fibernetsrl.com to learn about Fibernet and contact the company with these requirements, so that any proposed cable blowing solution can be assessed against the practical demands of your projects.

Still looking for information about drill powered fibre cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information