Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fibre blowing machine starts with understanding the cable, the duct and the conditions in which your team will work. Telecommunications contractors need equipment that suits the installation rather than a headline performance figure considered in isolation. Cable diameter, duct internal diameter, route geometry and the condition of existing infrastructure all influence the suitability of a proposed setup. Fibernet gives installation businesses a technically grounded point of contact for discussing these requirements. Founded in Italy in 2001, the company draws on practical experience that reaches back to the earliest stages of optical cable installation in the country. Its first cable blowing machine, Lady, was launched in 2021, marking an important step in the development of its installation equipment. For a contractor assessing a drill powered fibre cable blowing machine, the first useful action is to prepare a clear description of the intended work. Include the cable manufacturer's handling limits, the duct dimensions, the expected route length and any known changes in direction. State whether the duct is newly installed or already in service, and explain how the cable drum and compressed air equipment can be positioned. These details support a more meaningful equipment discussion than a request based solely on distance. In this type of installation, the drive mechanism advances the cable while airflow helps it travel through the duct. However, a drill is not a replacement for the compressed air supply required by an air assisted blowing process. Compressor suitability, airflow availability and permissible operating pressure therefore need separate attention. Equally important are the machine's approved operating parameters and the cable's maximum permissible pushing force. These must be checked against the documentation for the actual equipment and materials being used. Site preparation also has a direct effect on installation quality. A stable machine position, controlled drum payout and a clean cable entry path help the operator maintain consistent feeding. Duct continuity, cleanliness and integrity should be checked using procedures suitable for the duct system before installation begins. Where compatible and recommended, an appropriate cable blowing lubricant may help reduce friction, but its use should follow the relevant supplier's guidance. Discussing these practical conditions with Fibernet helps your business frame an equipment enquiry around the work it actually needs to complete. Whether you are organising repeat installations in Italian streets or coordinating crews across several territories, the objective remains the same: select an appropriate configuration, understand its limits and prepare the route properly. A well specified enquiry makes it easier to identify what needs confirmation before purchasing and reduces the risk of choosing equipment on assumptions alone.
On a busy installation site, productivity depends on more than how quickly a cable enters a duct. Crews also need an orderly setup, clear communication and a sensible response when resistance changes. A drill powered fibre blowing machine should therefore be assessed as part of the complete working arrangement, including the cable drum, duct connection, air supply and operator position. Before work starts, the team should establish who controls the drive, who monitors cable payout and how an immediate stop will be communicated. This becomes particularly important where the drum is not directly beside the operator or where access restrictions complicate the layout. Begin with the cable and duct documentation. Confirm the permitted handling conditions, check that the proposed machine configuration accommodates the relevant dimensions and inspect the components that contact the cable. Guides, seals and drive contact surfaces should be appropriate for the specific installation and maintained according to the equipment instructions. Excessive contact pressure is not a substitute for resolving an obstruction, and increasing drive effort without investigating resistance can put the cable at risk. A controlled approach uses the machine within its specified limits and treats unexpected changes as information that requires attention. Contractors comparing a drill driven fibre blowing machine with other equipment should ask how drive adjustment, cable guidance and stopping procedures work on the configuration offered. They should also establish which drill characteristics are required, rather than assuming that any tool already carried by the crew will be suitable. Compatibility depends on the machine manufacturer's requirements, including the mechanical connection and the permitted operating behaviour. If the intended setup uses a cordless drill, battery capacity and spare battery planning become practical considerations. Nevertheless, a battery powered fibre blowing machine still requires consideration of every other energy source involved in the installation, including compressed air where applicable. On site, clean working practices help protect consistency. Keep loose dirt away from the entry assembly, prevent uncontrolled loops between the drum and machine, and position equipment so that hoses and moving parts do not create avoidable hazards. Follow the manufacturer's instructions for isolation and pressure release before making adjustments or disconnecting components. Suitable personal protective equipment and site specific risk controls remain essential. Recording the route conditions and the setup used can also improve future planning. Useful notes include cable and duct dimensions, bends, interruptions, air supply details and the reasons for any stoppages. Such records help distinguish equipment questions from route related difficulties when reviewing a job. Fibernet's technical heritage makes these operational details a relevant starting point for an enquiry. Share your normal working conditions and the challenges your crews encounter so that discussions focus on equipment suitability, documented limits and the information needed before a purchasing decision.
For a business purchasing installation equipment, the relationship with the supplier matters alongside the machine itself. Buyers need a clear understanding of the proposed configuration, what is included in the quotation and which details remain subject to confirmation. Fibernet brings an Italian engineering background to these discussions, supported by a company history rooted in practical cable installation experience. Founder Giancarlo Trinei began working with optical cable systems in the early 1980s and contributed to installation and testing activities during the technology's early deployment in Italy. That background later informed the establishment of Fibernet in 2001 and its continued development of products for installation professionals. The company's generational transition began in 2010, when Matteo, Marta and Ismael joined the business. Today, its stated ambition is to become a global reference point for cable blowing machines while preserving the practical values on which the business was founded. For an English speaking contractor considering a drill powered fibre blowing machine, this background offers useful context, but the purchase should still be based on documented compatibility with the intended work. A productive first enquiry explains both the immediate project and the wider pattern of installations the equipment will support. For example, a contractor carrying out many short sections may prioritise setup requirements and movement between access points, while a business tackling more demanding routes will need a detailed discussion of route conditions and operating limits. Neither situation can be assessed reliably from the target distance alone. When requesting information about a drill powered optical fibre cable blowing machine, provide representative cable and duct specifications rather than only describing them as small or standard. Include the manufacturer's data sheets where available and identify any variations across your contracts. Ask which configuration is proposed, which accessories are necessary and whether additional items must be sourced separately. Clarifying those points early helps purchasing teams compare complete proposals rather than incomplete base prices. Businesses operating outside Italy should also request confirmation of delivery arrangements for their destination, relevant documentation, lead times and any destination specific requirements. Do not assume that shipping terms, import responsibilities or equipment requirements are identical across markets. The same care applies to after sales arrangements: ask about applicable warranty conditions, spare parts ordering, maintenance documentation and the available channels for technical enquiries. These are commercial details to confirm directly rather than infer from a product category. Explore www.fibernetsrl.com to introduce your installation requirements and request information about the equipment appropriate to your application. A clear brief allows the discussion to move beyond broad product descriptions towards the practical questions that affect your crews, your purchasing process and your next cable blowing project.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.