Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Selecting a drill powered fibre blower starts with understanding the cable and duct combination that your team will actually encounter on site. Cable diameter, duct internal diameter, route length, bends and the condition of the installed duct all influence the suitability of a blowing setup. For telecommunications contractors working in Italy, these details can vary significantly between individual sections of the same project. Rather than choosing equipment on a headline distance alone, prepare a clear description of the installation and ask which machine configuration is appropriate. Fibernet provides a direct point of contact for discussing cable blowing equipment, helping prospective customers move from a broad equipment search towards a technically informed enquiry. A useful starting point is the cable manufacturer's specification, particularly the permitted installation forces and any restrictions relevant to mechanical feeding. The duct specification matters just as much: nominal dimensions should not be confused with the usable internal space available for the cable. Route preparation also deserves attention before equipment is selected. Poor joints, excessive changes of direction, contamination or an obstructed duct can undermine an otherwise suitable installation plan. A drill powered fibre cable blower should therefore be assessed as part of a complete working arrangement rather than as a standalone answer to every difficult route. Ask about the required drive arrangement, compatible cable guides, sealing components and the connection to the compressed air supply. Do not assume that every drill, battery or compressor will be suitable simply because the machine is compact. The relevant operating instructions and confirmed equipment specifications should determine the final setup. On site, controlled feeding helps the operator respond to changing resistance instead of forcing progress when conditions deteriorate. The objective is consistent cable entry, appropriate handling and a working method that respects the limitations of every component. Before ordering, clarify how the cable is loaded, how contact pressure is adjusted where applicable, and which checks are required before starting. These practical questions are particularly useful when several crews need to follow the same installation procedure. It is also worth asking what is supplied with the machine and which accessories need to be specified separately. A drill driven fibre blower may be considered for projects where the drive arrangement suits the intended working method, but suitability must be checked against the particular model and application. When contacting Fibernet, provide the cable diameter, duct dimensions, expected section lengths and available air supply. Including photographs or a route description can make the discussion more productive. This approach gives purchasing teams and installers a shared technical starting point, reducing the risk of choosing equipment around incomplete assumptions rather than the real requirements of the job.
The working conditions around a cable blowing machine often determine how smoothly an installation progresses. Before bringing the equipment into position, establish a stable working area and plan the cable path from the reel to the machine inlet. The cable should approach without unnecessary bends, snagging points or uncontrolled tension. Reel handling is not a secondary task: a poorly managed payout can introduce resistance before the cable even reaches the duct. Assigning clear responsibilities between the person managing the reel and the machine operator helps the crew recognise problems early. Where work takes place beside roads or within restricted compounds, the arrangement must also respect the site's access controls and safety procedures. A drill powered fibre blower needs a suitable operating environment just as much as it needs compatible components. Check the duct route using the procedures specified for the project before attempting to blow the cable. Confirm that connections are secure, the intended destination is identifiable and the receiving end is managed safely. Compressed air introduces hazards, so hoses, couplings and associated equipment must be appropriate for the operating conditions and used according to their instructions. Never disconnect a pressurised assembly or attempt to clear a problem while the system remains energised. Any inspection, adjustment or maintenance should follow the manufacturer's isolation procedure. Once the equipment is prepared, the initial feed should be treated as an opportunity to verify behaviour rather than a reason to pursue maximum speed immediately. Observe cable movement, watch for slipping or deformation, and respond to unusual resistance by stopping and investigating. Increasing drive force is not a substitute for identifying an obstruction or an unsuitable setup. Contractors comparing a battery powered fibre cable blower with other arrangements should distinguish between the power used for mechanical feeding and the separate requirements of the air supply. A cordless drive does not automatically mean that the complete installation operates without a compressor or other supporting equipment. Establishing this distinction before mobilisation helps avoid missing equipment and unrealistic expectations about site independence. If your enquiry concerns a drill powered fibre blowing machine, explain how your crews are currently equipped and whether the machine will move frequently between access points. Ask Fibernet to clarify the relevant requirements for the proposed model rather than transferring assumptions from a different machine. Record the confirmed setup, inspect wear components as directed, and keep the correct replacement items available where practical. Following the job, clean and store the equipment according to its instructions, paying particular attention to components exposed to dirt or installation residues. Consistent preparation and documented operating checks support repeatable working practices across crews. They also make it easier to distinguish an equipment issue from a route, cable handling or compressed air problem when progress falls short of expectations.
For a contractor buying cable blowing equipment, the quality of the technical conversation matters alongside the machine itself. A purchasing enquiry should establish what the proposed equipment can do, what it requires to operate and which details remain dependent on site conditions. Fibernet was founded in 2001 and draws on the technical background of its founder, Giancarlo Trinei, whose experience with early fibre installations in Italy dates back to the 1980s. That background forms part of the company's development story, which reached an important milestone with the launch of its first cable blowing machine, Lady, in 2021. These facts provide context for the business, but a buying decision should still rest on the documented capabilities of the specific equipment under consideration. If you are evaluating a drill powered fibre blower, ask for information that relates directly to your cable sizes, ducts and installation method. A practical enquiry can describe a typical working day rather than simply request a price. Explain whether crews carry equipment between several access points, whether cable dimensions change frequently and whether the same machine needs to support different contracts. Include the compressed air equipment already available and identify any restrictions on working space or access. This gives the supplier a clearer basis for discussing configurations and accessories. It also allows your purchasing team to compare quotations on a consistent scope rather than on an incomplete headline figure. For buyers considering a drill driven fibre optic cable blower, written confirmation of compatibility is particularly valuable before committing to associated tools or consumables. Ask which parts are included, which components are selected for particular cable and duct dimensions, and what maintenance information accompanies the equipment. Clarify the availability of replacement wear items and the process for requesting technical assistance. These are questions to resolve directly with Fibernet, not benefits to assume without confirmation. Companies outside Italy should also establish delivery arrangements, documentation requirements and the responsibilities associated with importing machinery into their destination market. Discuss packaging, the delivery address and any project deadlines before finalising an order. Where Italian manufacture is important to your procurement criteria, request confirmation of the origin and supporting documentation for the proposed product. Equally, if your specification uses the term battery powered fibre optic cable blower, explain the exact drive arrangement you expect so that terminology does not conceal a technical mismatch. Fibernet's family ownership and generational development provide a human point of continuity behind these discussions. Since 2010, Matteo, Marta and Ismael have joined the business as it has pursued further growth. For customers, the useful next step is a focused conversation with the company: provide the installation data, request the applicable technical documentation and obtain a quotation that clearly identifies the equipment and accessories being proposed.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.