Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fiber optic cable jetting machine starts with understanding the cable and duct combination, rather than comparing equipment on appearance alone. For telecommunications contractors working on Italian infrastructure projects, the practical question is whether the proposed configuration suits the route, the cable construction and the resources available on site. Fibernet provides a direct point of contact for discussing these requirements against its cable blowing equipment range. Before requesting a recommendation, prepare the cable outer diameter, duct internal diameter, intended installation distance and any available information about bends, joints and changes in elevation. These details help establish a meaningful technical discussion without relying on headline performance figures that may not represent actual working conditions. A drill-driven mechanism supplies the mechanical feed, while an appropriate compressed air supply supports cable movement through the duct. The drill does not replace the compressor, and its suitability must be checked against the machine manufacturer's requirements. Drive compatibility, rotational speed, torque control and the connection between the drill and feeding mechanism all matter. Likewise, cable guides, seals and traction components must match the intended application. Excessive feeding force can damage a cable even when the machine continues to turn, so controlled operation is more important than simply achieving the highest possible speed. When assessing a drill powered fiber optic cable blowing machine, ask how feeding pressure is adjusted, how the cable is supported and what procedure applies if resistance rises unexpectedly. Site preparation is equally important. Duct continuity, cleanliness and integrity should be checked using appropriate procedures before installation begins. A poorly prepared route can undermine the performance of otherwise suitable equipment. The cable drum also needs a stable position and a payout arrangement that avoids unnecessary drag, twisting or uncontrolled movement. Operators should monitor the entry point and coordinate cable release with the person controlling the machine. For a contractor evaluating a cable jetting machine for fiber optic cable installation, these operational considerations provide a better basis for selection than an isolated distance claim. They also help identify which accessories, consumables and air supply arrangements belong in the initial quotation. Fibernet's technical background offers a relevant starting point for this conversation: the company was founded in 2001, and its first cable blowing machine, Lady, was launched in 2021. Contact the team with your application details to establish which available configuration is appropriate, what specifications require confirmation and how the equipment can fit your working practices. This approach keeps the purchase focused on a defined installation task, with realistic expectations about preparation, compatibility and operator control.
A useful equipment quotation should describe a workable installation setup, not merely a machine with an attractive headline cost. When your team is considering a drill powered fiber optic cable jetting machine, establish exactly what the proposed supply includes and which items must be sourced separately. Depending on the selected configuration, these may include the drill, compressor connection, cable guides, duct adaptors, sealing components and replacement wear parts. Their availability and suitability affect how quickly the equipment can be put to work. Ask Fibernet to confirm the scope of supply against your cable sizes and planned applications, rather than assuming that every accessory shown or discussed is standard. An informed comparison of fiber optic cable jetting machine price should also account for the costs associated with moving, preparing and maintaining the complete setup. A lightweight drive arrangement does not eliminate the need to assess compressor capacity, air quality, suitable hoses and safe working access. Pressure and flow are different parameters, and both must satisfy the requirements of the selected machine and application. Any stated operating limit should come from the relevant technical documentation. Do not infer achievable distance from pressure alone, because duct geometry, cable properties, friction and route condition all influence the result. For contractors moving between roadworks, existing access chambers and constrained deployment areas, handling arrangements deserve particular attention. Consider how the equipment will be secured, where the cable drum will stand and how operators will maintain a clear view of the feed path. A compressed air fiber optic cable jetting machine also requires appropriate control of pressurised connections. Connections should be checked before use, and the system must be depressurised according to the manufacturer's procedure before components are opened or adjusted. These steps belong in the job plan, alongside the relevant site safety requirements. Maintenance planning provides another useful distinction between quotations. Find out which components require routine inspection, how wear is recognised and whether replacement instructions and parts identification are available. Worn traction surfaces, damaged seals or unsuitable guides can introduce avoidable interruptions and affect cable handling. Keeping the correct consumables available is often more useful than holding unrelated accessories that do not match the contractor's usual cable and duct combinations. For purchasing teams in Italy and English-speaking businesses elsewhere, delivery arrangements and documentation should be clarified before ordering. Ask about the proposed dispatch schedule, destination requirements, warranty terms and the process for obtaining technical assistance. International enquiries should include the delivery country so that transport options and any applicable requirements can be discussed. By comparing a clearly defined package, buyers can assess value on a practical basis: the suitability of the equipment, the completeness of the setup and the support arrangements needed to keep installation work organised.
Fibernet's approach to cable blowing equipment is rooted in practical experience and a family-led ambition to build an international presence. Founder Giancarlo Trinei began working with fibre optic installations in Italy during the early 1980s, contributing to the installation and testing of early submarine cables for the Ministry of Telecommunications. He established Fibernet in 2001, bringing that technical background into a business focused on developing useful equipment. For a contractor investigating a drill powered fiber optic cable jetting machine, this history is relevant when it leads to specific, answerable questions about the installation task. The objective is not to choose a machine because of a company story alone, but to use access to the supplier to clarify compatibility, operation and purchasing requirements before making a commitment. The business began its generational transition in 2010, when Matteo, Marta and Ismael joined the company. Its development later included the launch of Lady, Fibernet's first cable blowing machine, in 2021. These milestones provide context for an equipment enquiry without establishing specifications for every model or drive arrangement. Buyers should therefore ask which current product meets their needs and request the corresponding technical information. If your specification uses the term drill driven fiber optic cable jetting machine, explain the intended power arrangement and any drill already available to your operators. Similar terminology can conceal important differences in approved drives, couplings and operating procedures. Clear requirements make the discussion more productive for both engineering and procurement teams. A useful enquiry can describe one representative installation rather than an entire network programme. Include the cable construction and diameter, duct dimensions, approximate route length, significant bends and the compressor available on site. Add details about working access and the expected frequency of use. If your crews handle several cable sizes, identify the common sizes separately from occasional applications. This helps frame questions about changeover components, adjustment procedures and the practicality of maintaining a consistent setup across different jobs. Choosing a fiber optic cable jetting machine should also involve the people who will prepare and operate it. Their observations about drum positioning, access restrictions and daily transport can reveal requirements that are easy to overlook in a purchasing spreadsheet. Before ordering, request confirmation of the selected configuration, included accessories, operating documentation and relevant limits. Ask how technical questions will be handled after delivery and what information is needed when requesting replacement parts. For customers outside Italy, discuss shipment availability and destination-specific arrangements directly with Fibernet rather than assuming identical conditions for every country. A well-prepared conversation gives your team a clearer basis for evaluating the investment and helps connect the chosen equipment to the actual demands of cable blowing work.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.