Cable blowing machines · Made in Italy

Looking for "drill powered fiber cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable blowing equipment to the work ahead

Choosing a drill powered fiber cable blowing machine starts with understanding the installation rather than comparing machines in isolation. For contractors working on sites across Italy or managing projects overseas, the practical question is whether the proposed equipment suits the cable, duct and working conditions. Cable diameter, duct internal diameter, route length, bends and access points all influence the assessment. Fibernet provides a direct point of contact for businesses seeking cable blowing equipment and guidance on which configuration to consider. Sharing these details at the enquiry stage makes the discussion more useful and helps avoid ordering a machine on the strength of a headline specification alone. In a typical drill driven arrangement, the drill supplies mechanical drive while compressed air helps move the cable through the duct. These functions must work together: mechanical feed should remain controlled, and air delivery must match the requirements of the selected equipment and installation. A drill is therefore not a substitute for the compressed air supply. Before choosing a drill powered fiber optic cable blowing machine, ask which drill characteristics are required, how the drive connects and what operating limits apply. Compatibility should be confirmed for the actual machine, rather than assumed from the appearance of its coupling or drive mechanism. The cable itself deserves equally careful attention. Its outside diameter, construction and permitted installation forces affect how it should be handled. Suitable gripping components should guide and advance the cable without excessive compression, while the duct connection and seals need to suit the dimensions involved. Ask about the available configurations, what is supplied as standard and which components are needed when moving between cable sizes. For a contractor installing different cable formats during the same working week, these details can matter as much as the initial equipment cost. Route preparation also affects the value obtained from a cable blowing machine for fiber optic cable installation. A duct with unexpected restrictions, poor connections or excessive contamination can undermine an otherwise suitable setup. Establishing duct continuity, inspecting accessible connections and following an appropriate preparation procedure can reduce avoidable interruptions. Any cleaning, testing or lubrication should follow the relevant equipment, duct and cable instructions. When approaching Fibernet, provide the intended cable and duct dimensions alongside the expected route conditions and available compressor information. Explain whether the team needs equipment for repeated short sections, longer routes or a mixture of tasks. This gives the technical discussion a concrete starting point. The objective is not simply to purchase a machine, but to establish a workable equipment combination that installers can prepare, operate and maintain in accordance with its documented requirements.

Plan the working setup before the machine reaches site

A productive installation depends on the whole working setup, not just the moment when the cable begins to enter the duct. Consider how the machine will be positioned beside the entry point, where the cable drum will stand and how the operator will maintain a clear view of the feed. Cable should approach the equipment without unnecessary twists or sharp changes in direction. The working area also needs sufficient space for air hoses, connections and safe access to controls. Addressing these points during planning helps a contractor assess whether a drill powered fiber cable blowing machine is appropriate for the intended site conditions. Begin with a clear record of the proposed equipment combination. Identify the cable and duct dimensions, the compressor characteristics, the drill requirements and any adapters or seals needed for the job. Confirm permissible pressures and operating procedures from the relevant documentation, rather than relying on settings used successfully on a different installation. Pressure capability alone does not establish compressor suitability; the required air delivery and its condition also need consideration. Where moisture or contamination could affect operation, discuss the specified air preparation requirements before starting work. If the intended drive uses a cordless drill, battery management becomes another practical consideration. A search for a battery powered fiber cable blowing machine may describe equipment with different drive arrangements, so establish exactly what the battery powers. A cordless mechanical drive does not necessarily remove the need for a compressor, nor does it guarantee a particular operating duration. Ask about compatible drill specifications, expected working demands and the provisions needed for charging or spare batteries. These checks help teams plan around their actual equipment rather than an ambiguous product description. During installation, follow the approved starting sequence and monitor cable movement carefully. An unexpected reduction in progress should prompt assessment, not an automatic increase in pushing force. Possible causes include resistance along the route, an unsuitable feed adjustment, a connection issue or a problem with the cable supply. Stop and investigate according to the equipment instructions, keeping personnel clear of pressurised connections and moving components. Appropriate protective measures and competent operation remain essential regardless of how compact the machine appears. When evaluating a drill driven fiber cable blowing machine, also ask how routine inspection and cleaning should be carried out. Identify wear components, recommended checks and the procedure for changing cable handling parts. Before any adjustment requiring access to moving or pressurised areas, follow the specified isolation and depressurisation procedure. Recording the setup used on each job, together with route conditions and any interruptions, can improve future planning. Share these operational needs with Fibernet when requesting advice, so that the conversation covers daily use as well as the initial equipment selection.

Discuss your requirements with an Italian manufacturer

Fibernet brings an Italian engineering background to conversations about cable blowing equipment. Founded in 2001, the company developed from the technical experience of Giancarlo Trinei, whose work with optical fibre dates back to the early installations in Italy during the 1980s. Its first cable blowing machine, Lady, was launched in 2021. For a business assessing a drill powered fiber cable blowing machine, that history provides context, while the purchasing decision should still rest on confirmed technical suitability, a clear quotation and an understanding of the proposed supply. The company's family foundations remain part of its identity. Matteo, Marta and Ismael joined the business during the generational transition that began in 2010, supporting its development while preserving its founding values. This continuity sits alongside an ambition to bring Italian manufacturing to customers worldwide. Contractors and telecommunications businesses can approach Fibernet with their installation requirements and discuss equipment for projects in Italy or international destinations. Availability, delivery arrangements and the precise configuration should be confirmed for each order, particularly when equipment must arrive before a scheduled installation window. A useful enquiry goes beyond asking for a fiber cable blowing machine price. State the cable diameters you expect to install, the duct sizes in use and the typical conditions of your routes. Include the drill and compressor details if these have already been selected. If they have not, explain what equipment is available locally and request confirmation of the requirements before committing to additional purchases. This approach helps distinguish the machine itself from the complete working setup and gives both parties a clearer basis for discussing suitability and cost. Ask for a quotation that identifies the proposed model, included components and any separately priced items. Clarify whether the drill, compressor, connection accessories and size specific parts are included or must be sourced separately. Businesses comparing a drill powered cable blowing machine should also check the applicable documentation, maintenance requirements, warranty terms and arrangements for replacement components. These are points to verify directly, not features that should be assumed from a general product description. A transparent scope of supply makes comparisons more meaningful and reduces the risk of unexpected purchases after delivery. For international orders, discuss destination requirements, shipping arrangements and the documents needed to receive the equipment. Confirm lead times against the project programme and allow for any local import procedures that apply. It is also sensible to identify who will receive technical information and who will operate the machine, so that relevant instructions reach the right people. Through www.fibernetsrl.com, prospective customers can introduce their project and request a focused discussion. The goal is a practical purchasing decision grounded in the intended installation, with Italian manufacturing considered alongside the operational details that determine whether the equipment is right for the job.

Still looking for information about drill powered fiber cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information