Cable blowing machines · Made in Italy

Looking for "drill powered fiber cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the job ahead

A drill powered fiber cable blower should be selected around the cable, duct and working conditions, rather than a headline installation distance. For contractors installing cables into prepared ducts in Italy, the starting point is a clear description of the task: cable outer diameter, duct internal diameter, route length, bends, access points and available compressed air. These details help establish whether a proposed machine configuration suits the application and which accessories require confirmation. Fibernet welcomes enquiries from installation businesses seeking to discuss these practical requirements before committing to equipment. The aim is to make the purchasing conversation specific, so that the proposed solution can be assessed against the conditions your crew will actually encounter. In a blowing operation, mechanical feeding and compressed air perform complementary roles. The feed mechanism advances the cable, while airflow through the duct helps carry it along the route. A drill supplies drive to the feeding mechanism in a drill driven fiber cable blower; it does not replace the compressed air supply required by an air assisted blowing process. Understanding that distinction matters when planning transport, site access and the equipment needed beside the machine. Before choosing a configuration, ask about compatible drill characteristics, operating controls, cable guidance, sealing components and the applicable air supply requirements. These points must be checked against the documentation for the particular model rather than assumed from the general equipment category. Cable handling deserves equal attention. The cable manufacturer’s limits for pushing force and bend radius remain relevant throughout the operation, and excessive feed pressure is not a substitute for investigating resistance. An unsuitable seal, a restricted duct or an awkward entry angle can undermine an otherwise carefully planned installation. Preparing the cable reel for smooth payout, keeping the entry path aligned and checking the condition of contact surfaces are practical steps that support controlled feeding. Where lubrication is appropriate, its suitability should be verified for the cable sheath, duct material and equipment instructions. When assessing a cable blower for fiber optic cable installation, also consider what happens between individual blowing runs. Crews may need to move equipment between access points, change cable sizes or inspect components exposed to dust and debris. Ask how the proposed setup accommodates those tasks, which parts are supplied and which items are ordered separately. Fibernet’s first cable blowing machine, Lady, was launched in 2021, reflecting the company’s development work in this specialist equipment category. To discuss your own application, provide your cable and duct specifications together with a realistic description of the route. That information creates a useful basis for a technical enquiry, without relying on unsupported promises about speed, distance or universal compatibility.

Prepare the blowing operation before the crew reaches the duct

Effective use of a drill powered fiber cable blower begins before the machine is positioned at the duct entrance. A contractor preparing several installation sections needs more than an equipment name on a purchasing document: the crew needs an agreed setup, the appropriate components and a clear understanding of the operating limits. Start with the actual cable data sheet and the specification of the installed duct. Confirm diameters, permitted handling limits and any relevant installation recommendations. Then establish how the equipment will reach each access point, where the cable reel can stand and how the air supply will be connected safely. These checks help reveal practical constraints while there is still time to resolve them. Duct preparation is a separate responsibility that should not be overlooked when comparing machines. Its continuity, condition and suitability for blowing need verification using procedures appropriate to the installation. A poorly joined section, accumulated water or an obstruction can affect progress regardless of the feeding mechanism. Do not assume that increasing drive force or air pressure will solve unexpected resistance. Stop and investigate according to the equipment instructions and site safety procedures. Compressed air connections, hoses and fittings must be suitable for the intended operating conditions, and the system should be depressurised safely before disconnection or intervention. Questions about a battery powered fiber cable blower often arise when teams want to reduce dependence on a nearby electrical supply. However, a battery operating the drive does not necessarily make the complete installation arrangement independent of external equipment. Compressed air requirements still need separate assessment. Likewise, when considering a drill powered cable blower, confirm whether the proposed drill, battery arrangement and controls are approved for that particular machine. Buyers should request documented compatibility rather than assume that any available drill will provide the correct operating characteristics. This distinction helps procurement teams prepare a complete equipment package instead of discovering missing requirements on site. During operation, crew coordination is just as important as preparation. The person controlling the feed should be able to communicate with colleagues supervising cable payout and the receiving point where applicable. Agree how the team will signal a stop, respond to abnormal resistance and secure the working area. Record useful details from each run, including the cable and duct combination, route characteristics, setup and any difficulties encountered. Such records support more informed planning for later sections without suggesting that identical results are guaranteed. After the run, inspect and clean the machine as directed, paying particular attention to cable contact areas and sealing components. When contacting Fibernet, describe these working arrangements as well as the dimensions involved. A practical discussion of the full operation is more useful than choosing equipment on a single performance figure.

Build a clear equipment enquiry with Fibernet

Requesting a drill powered fiber cable blower quotation is an opportunity to define what your business needs from the equipment, not simply to obtain a purchase figure. For a telecommunications contractor, the most useful proposal is one that identifies the intended application, the proposed configuration and the boundaries of the supply. Explain whether your crews repeatedly work with one cable and duct combination or need to accommodate several combinations across different projects. Include the typical access conditions and any restrictions affecting transport or positioning. These details help make the discussion relevant to the work, while leaving technical suitability to be confirmed for the specific machine and accessories under consideration. Fibernet was founded in 2001 and draws on the technical background of its founder, Giancarlo Trinei, whose experience with installations in Italy dates back to the early 1980s. That background provides context for the company’s focus on developing practical equipment. The introduction of Lady in 2021 marked the launch of its first cable blowing machine. For a prospective buyer, this history is a starting point for asking informed questions about the current range, available configurations and the documentation supplied with a proposed purchase. Product suitability should always be established through current specifications, rather than inferred from company history alone. When comparing fiber cable blower price quotations, check whether they cover equivalent supplies. A figure for a machine alone cannot be compared directly with a proposal that includes additional guides, seals or other application specific components. Ask which cable and duct sizes the quoted configuration accommodates, what additional items are necessary and what information is needed to confirm compatibility. Clarify the supply of the drill and air equipment rather than assuming either is included. Availability, delivery arrangements, warranty terms and the process for obtaining replacement components should also be established before ordering. These commercial details are particularly important when equipment must be coordinated with a scheduled installation project. A search for a drill powered fiber optic cable blowing machine may bring together products with different operating arrangements and application limits. Look beyond the shared description and request the documentation needed to assess the actual proposal. Ask how routine cleaning is performed, which components require inspection and what guidance is available for setup. For buyers based outside Italy, confirm destination specific shipping arrangements, documentation requirements and any questions about local use directly with Fibernet. Avoid treating international delivery or regulatory suitability as automatic. A well prepared enquiry can include cable data sheets, duct dimensions and a short description of the anticipated work. Submit those details through www.fibernetsrl.com to begin a focused discussion about cable blowing equipment, the proposed supply and the next steps towards an informed purchasing decision.

Still looking for information about drill powered fiber cable blower?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information