Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fiber blowing machine starts with the cable, the duct and the working conditions, rather than a headline installation speed. For telecommunications contractors working on Italian sites, a useful equipment enquiry should describe the cable outside diameter, the duct internal diameter, the planned route and the available compressed air supply. These details help establish whether a proposed configuration suits the application. Fibernet develops cable blowing machines and welcomes enquiries from businesses seeking equipment for their installation work. Providing practical site information gives the discussion a clear starting point and helps avoid selecting a machine on assumptions that do not reflect the route ahead. A drill supplies mechanical drive in this equipment category, while compressed air supports cable movement through the duct. The two functions must be considered together: a portable drive arrangement does not remove the need to assess compressor suitability, duct integrity or cable handling requirements. Before choosing a drill powered fiber cable blowing machine, ask which cable and duct combinations are supported, which accessories are necessary and what the manufacturer specifies for the drive tool. Drill compatibility should never be inferred simply because a tool fits physically. Suitable operating settings, coupling arrangements and any restrictions need confirmation for the particular machine. Route preparation is equally important. Tight bends, damaged duct sections, unsuitable joints and contamination can increase resistance and undermine an otherwise appropriate equipment choice. Contractors should establish how the duct will be checked, how the cable drum will be positioned and how the team will communicate during feeding. A well organised entry point gives the operator room to observe cable movement and respond when conditions change. Where several duct sizes are used across a project, discuss changeover requirements before ordering, including the availability of the correct guides, seals and connection components. These details can influence daily productivity more than an isolated maximum performance figure. When comparing a drill driven fiber blowing machine with another configuration, consider the complete working arrangement rather than the drive source alone. Access to compressed air, equipment transport, setup time, cable protection and operator control all affect suitability. Ask for performance information with its test conditions, including cable dimensions, duct dimensions and route characteristics. No single distance or speed should be treated as a guaranteed result for every installation. Fibernet can be contacted with these project details to discuss relevant cable blowing equipment and clarify the information needed for a considered selection. The aim is a purchase decision grounded in the actual installation task, with compatibility questions addressed before the machine reaches the site.
A successful blowing operation depends on what happens before the drive starts turning. When assessing a drill powered fiber blowing machine, installation teams should plan the complete sequence from unloading the equipment to managing the cable at the duct entrance. Begin with a stable working position that allows access to the controls without placing the operator in line with unsecured pressurised connections. Check the machine instructions, the cable manufacturer's handling limits and the duct system requirements together. None of these documents should be treated as a substitute for the others, because the permitted operating conditions depend on the combination of components used. The compressed air arrangement deserves particular attention. Confirm the pressure and flow requirements for the selected machine and application, then check that the supply equipment, hoses and connectors are suitable. A pressure reading alone does not establish that sufficient airflow will be available during operation. Air quality requirements should also be checked against the equipment instructions. Before making adjustments or disconnecting components, stop the equipment and release pressure according to the prescribed procedure. Practical preparation includes inspecting seals, checking that guides match the cable and ensuring that the duct connection is correctly assembled. These are routine steps, but overlooking them can create avoidable interruptions and make the cause of poor progress harder to identify. Cable payout should be controlled so that the machine is not fighting unnecessary resistance at the drum. Position the drum to support a smooth feed path, respecting the specified bending radius and avoiding contact with sharp edges. Keep the immediate working area clear enough to observe the cable and identify changes in behaviour. If movement slows or stops, do not assume that additional drive force is the answer. Pause and investigate possible causes, such as payout resistance, a duct restriction, an unsuitable setup or a change in the route. A drill powered cable blowing machine should always be operated within its documented limits, including any requirements governing the drill and its settings. For repeated installations, a simple job record makes future equipment discussions more useful. Record the cable and duct dimensions, approximate route length, significant bends, compressor details and any interruptions encountered. Such information provides context when comparing outcomes between sites. It also helps distinguish a machine configuration issue from route conditions that require attention. Teams considering a battery powered fiber cable blowing machine should clarify whether that description refers only to the drive tool or to a broader equipment arrangement. Battery operation must not be mistaken for independence from compressed air. Share the intended working method with Fibernet when making an enquiry, and request confirmation of the relevant configuration, supplied components and operating documentation before finalising your equipment choice.
Behind a cable blowing machine is a series of engineering decisions that affect how the equipment is selected, prepared and used. Fibernet was founded in 2001 by Giancarlo Trinei, whose technical background includes work on early optical cable installations in Italy during the 1980s. That practical heritage provides context for the company's focus on developing equipment intended to simplify installation work. In 2021, Fibernet launched Lady, its first cable blowing machine, marking a significant step in its development as a manufacturer in this sector. For a contractor researching a drill powered fiber blowing machine, the relevant next step is to connect that manufacturing background with the requirements of a specific project, rather than assume that every machine or configuration will suit every application. Fibernet's development also reflects continuity within the Trinei family. Matteo, Marta and Ismael joined the business as its generational transition began in 2010. Under CEO Matteo Trinei, the company pursues the ambition of bringing Italian engineering to a global market. For prospective buyers, this makes the manufacturer enquiry an opportunity to discuss both the technical application and the practical arrangements surrounding a purchase. Businesses operating in Italy can describe their local site conditions, while international contractors can provide destination details and request information about supply arrangements. Delivery availability, timing and commercial conditions should be confirmed for each order rather than assumed from the outset. A productive enquiry can be concise while still covering the essentials. Explain which cables will be blown, identify the duct sizes and describe whether the machine will serve one defined project or move between different sites. If your team is searching for a drill powered fiber optic cable jetting machine, include the proposed drill details and ask which equipment configuration is appropriate. State whether a compressor is already available, and provide its documented specifications rather than only its nominal pressure rating. Photographs or technical drawings of the intended working arrangement may also help explain unusual access constraints, provided they can be shared appropriately. Commercial clarity matters alongside technical suitability. Request an itemised quotation identifying the machine, application specific components and any optional accessories under discussion. Ask what documentation accompanies the equipment, how replacement wear components can be identified and which support arrangements apply to your location. When comparing a drill powered fibre blowing machine with another option, use the same project information for both enquiries so that the comparison remains meaningful. A lower initial price does not resolve missing compatibility information or unclear supply scope. Explore www.fibernetsrl.com to learn about Fibernet and contact the company with your cable blowing requirements. A detailed conversation can help establish the appropriate next steps without relying on unsupported promises about installation distance, speed or suitability.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.