Cable blowing machines · Made in Italy

Looking for "drill driven optical fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the conditions on your site

Choosing a drill driven optical fibre cable blowing machine starts with understanding the installation rather than selecting equipment by appearance or headline performance alone. For telecommunications contractors working in Italy, the important questions concern the cable, the duct and the route between access points. Cable diameter, outer sheath characteristics, duct internal diameter, bends, joint quality and available compressed air all influence the result. Fibernet provides a direct point of contact for companies that want to discuss these factors before making an equipment enquiry. Sharing a clear description of your working conditions helps establish which machine configuration deserves closer technical assessment and which accessories may be necessary for the proposed application. A drill driven system uses rotational input from a suitable drill to operate its mechanical feeding mechanism, while compressed air assists cable movement through the duct. These two contributions must be coordinated: increasing mechanical force is not a substitute for a clean, continuous and correctly prepared route. Before starting, installers should check duct integrity, verify connections and confirm that the cable can enter the machine without an awkward approach angle. The equipment documentation must determine the permitted drill characteristics, working limits and adjustment procedure. Compatibility should never be assumed simply because a drill can be physically connected. When assessing a drill driven cable blowing machine, ask how its cable guides, drive components and seals correspond to the dimensions used by your crews. Also consider the practical sequence of setting up, threading the cable, connecting the air supply and checking operation before installation begins. A machine that suits one cable and duct combination may require different components for another. Providing both measurements during the enquiry avoids an incomplete comparison and helps identify the information needed for a meaningful quotation. On site, controlled handling matters as much as the selection itself. The cable drum should unwind freely, personnel should communicate clearly and the work area should allow safe access to the controls. Operators should follow the specified procedure if movement becomes irregular, rather than repeatedly increasing speed or pressure. For a drill powered optical fibre cable blowing machine, battery capacity and drill duty limits also deserve attention where a cordless drill is approved. These considerations help contractors organise a complete working arrangement instead of focusing on the machine in isolation. Contact Fibernet with your cable data, duct dimensions and typical installation conditions to discuss a drill driven optical fibre cable blowing machine against practical requirements. The objective is a technically informed equipment choice, with expectations based on the actual route rather than an unsupported promise of distance or speed.

Prepare a complete technical enquiry and compare the real equipment cost

A useful equipment quotation should explain what is being supplied and what the installation team must provide separately. When enquiring about a drill driven optical fibre cable blowing machine, begin with the cable manufacturer's dimensional and handling information, the duct specification and a description of typical routes. Include the expected number of installations, the frequency of changes between cable sizes and any restrictions around access chambers or working space. These details make the discussion more productive than asking for a single price without defining the application. They also help procurement staff and site supervisors compare proposals on the same basis. The optical fibre cable blowing machine price is only one element of the purchasing decision. Depending on the selected arrangement, the complete working setup may involve cable guides, duct connectors, sealing components, a compatible drill, an appropriate compressed air supply and other items specified in the equipment documentation. Ask which components are included, which are optional and which must be sourced separately. Confirm the relevant working limits and request clarification where a quoted configuration does not clearly match your cable and duct measurements. This approach reduces the risk of ordering equipment that requires additional parts before it can be used as intended. Operational cost also depends on preparation and care. Contamination around seals or drive surfaces can affect operation, while incorrect adjustment can expose the cable to unnecessary mechanical stress. Establish a routine based on the manufacturer's instructions for inspection, cleaning and replacement of wear components. Before purchase, ask about access to documentation, the identification of replacement parts and the process for obtaining technical assistance. These are useful commercial questions, not assumptions about what any particular package includes. A lower initial purchase figure does not automatically produce a lower cost across repeated installations. Some contractors also consider optical fibre cable blowing machine rental when assessing their project pipeline. Comparing temporary access with ownership can be sensible, but the comparison should include availability, configuration, collection arrangements, condition and responsibility for consumable components. An enquiry to Fibernet should establish which purchasing or other commercial options are actually available; rental availability should not be presumed. For companies planning repeated use, purchasing may offer greater control over equipment allocation, subject to their own workload and financial assessment. A drill driven optical fibre cable blowing machine should ultimately be evaluated against the work it needs to perform and the resources required to operate it correctly. Send Fibernet a concise technical brief and request a quotation that identifies the proposed configuration, scope of supply and any points requiring confirmation. This gives your purchasing team a clearer basis for approval and helps your installers prepare before the equipment reaches the site.

Discuss your installation needs with an Italian manufacturer

Fibernet's approach to cable blowing equipment draws on a technical history that began well before the company's foundation in 2001. Founder Giancarlo Trinei worked on early optical fibre installations in Italy during the 1980s, including installation and testing activities associated with the country's first submarine cables. That background provides context for the company's practical interest in equipment used by installation professionals. Its first cable blowing machine, Lady, was launched in 2021, marking a specific milestone in the development of its own machinery. For a contractor assessing a drill driven optical fibre cable blowing machine, this history is a starting point for a technical conversation, not a replacement for checking the specifications of the proposed model. The family business entered a new generation of involvement in 2010, when Matteo, Marta and Ismael joined the activity. Today, the company's ambition is to bring Italian technical expertise to customers internationally while retaining the practical values on which it was established. For purchasing teams, the useful next step is to translate that background into concrete questions about their installation needs. Ask which available machine is suitable for your cable dimensions, how its feeding arrangement is configured and what information is required to assess your intended duct sizes. Request the relevant documentation before deciding whether a particular solution belongs in your equipment fleet. International enquiries should also distinguish the machine specification from the delivery arrangements. Confirm destination details, packaging, shipping terms, documentation and any applicable import requirements with the supplier before placing an order. Buyers operating in Italy can likewise clarify delivery arrangements and the information needed for internal procurement. Avoid treating a general product description as confirmation that every accessory, drill or air connection is included. A written scope of supply helps everyone understand what will arrive and what must already be available at the worksite. When comparing a pneumatic optical fibre cable blowing machine with a drill driven arrangement, establish exactly how each proposed model generates and controls its feeding action. Compressed air can assist cable travel without necessarily being the power source for the mechanical drive, so terminology alone is insufficient. Similarly, a battery powered optical fibre cable blowing machine enquiry should clarify whether the description refers to an integrated battery system or an approved cordless drill supplying rotational input. These distinctions matter when planning power availability, equipment compatibility and daily operating routines. Fibernet can be contacted through its website to discuss the application and establish the product information relevant to your enquiry. Describe the routes your crews encounter, the cable and duct combinations they use and the practical limitations of their sites. This creates a sound basis for assessing a drill driven optical fibre cable blowing machine without relying on generic performance claims or assuming that every installation requires the same setup.

Still looking for information about drill driven optical fibre cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information