Cable blowing machines · Made in Italy

Looking for "drill driven OFC cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around your actual installation conditions

Selecting a drill driven OFC cable blowing machine starts with understanding the cable, the duct and the conditions your installation team will face. For telecommunications contractors working on Italian sites or managing projects abroad, these details matter more than a headline installation distance. Cable outside diameter, duct internal diameter, route geometry and the condition of existing ducts all influence whether a proposed configuration is appropriate. Fibernet provides a direct point of contact for discussing these requirements before you select equipment. Rather than assuming that one arrangement suits every job, prepare the cable and duct specifications, describe the planned route and explain how your team normally organises its blowing operations. This gives the technical discussion a practical foundation and helps identify which equipment details need confirmation. A drill driven cable blowing machine uses a compatible drill to provide mechanical drive, while compressed air assists cable movement through the duct. The precise operating arrangement depends on the machine, so drill compatibility, drive settings, air connections and operating limits must be checked against the relevant documentation. A drill is not a substitute for the compressed air supply required by an air assisted blowing process. Compressor selection therefore deserves attention alongside machine selection: available pressure, delivered airflow and air quality must match the equipment requirements and the installation conditions. Before work begins, the crew should also establish whether the duct is continuous, suitable for the intended operating pressure and free from obstructions. An installation can become difficult even with suitable equipment if a connection leaks, a bend creates excessive resistance or contamination increases friction. When comparing a drill driven fiber cable blowing machine with your current working method, focus on how the complete setup will function at the worksite. Consider space for the cable drum, a controlled cable entry path, access to the controls and a stable position for the machine. Check how the cable will be guided without exceeding its permitted bend radius, and how the operator will monitor progress while another team member manages drum payout where required. These are practical considerations that can reduce avoidable interruptions, although actual results always depend on site conditions and correct operation. For a useful enquiry to Fibernet, include cable construction details, duct dimensions, estimated section lengths and any known bends or joints. Add information about the drill and compressor you intend to use, rather than assuming that existing tools will be compatible. With that information available, the conversation can move from a broad product search towards a clearly defined equipment requirement and a quotation based on your intended cable blowing work.

Build a controlled blowing process before the cable starts moving

A well prepared cable blowing operation gives the crew a clear sequence to follow and a clear basis for deciding when to pause. Start by reviewing the route documentation and identifying the accessible duct ends, intermediate points and any sections where the installation conditions are uncertain. Confirm that the proposed cable and duct combination falls within the selected machine configuration, including any required guides, seals or other size dependent components. These details should be established from the equipment documentation and supplier guidance, not estimated at the roadside. For a drill driven OFC cable blowing machine, the relationship between mechanical feed and air assistance is especially important. Increasing drill speed does not automatically produce a better result: the cable must enter the duct in a controlled manner, with settings that respect both the equipment limits and the cable manufacturer's recommendations. Before connecting the compressed air supply, inspect hoses, couplings and other pressure carrying components for suitability and condition. Secure the working area and make sure everyone involved understands the operating procedure, communication signals and stopping arrangements. Compressed air introduces hazards, so isolation and depressurisation must follow the manufacturer's instructions before connections are opened or adjustments are made. The cable drum position also deserves careful planning. Poor alignment or uncontrolled payout can introduce resistance before the cable even reaches the duct, making it harder to understand what is happening along the route. Keep the incoming path controlled, protect the cable from sharp edges and maintain the specified bend radius throughout handling. When evaluating a cable blowing machine for fiber optic cable installation, ask how routine preparation, inspection and component changes are performed on the proposed model. A practical purchasing discussion should cover the supplied configuration, compatible cable and duct sizes, operating instructions and any accessories needed for your application. Do not assume that every item shown in an illustration is included in a quotation. During blowing, monitor progress using the methods supported by the equipment and maintain communication between relevant positions. If movement becomes irregular or resistance increases, follow the prescribed stopping procedure and investigate rather than simply applying more drive. Possible causes include duct leakage, restrictive bends, unsuitable setup or cable payout problems; identifying the cause is more useful than treating every slowdown in the same way. A drill powered cable blowing machine should be assessed as part of this complete working process, not as an isolated tool. After the operation, clean and inspect the equipment as instructed, check wear components and record any issues that affected the run. Sharing those observations with Fibernet can make a subsequent equipment discussion more precise, especially when your next project involves different duct dimensions, cable characteristics or site constraints.

Discuss your next cable blowing project with an Italian technical business

Fibernet was founded in 2001, drawing on Giancarlo Trinei's technical experience with optical fibre installations in Italy since the early 1980s. That background provides context for a business focused on practical equipment development and the working requirements of installation professionals. In 2021, the company launched Lady, its first cable blowing machine, marking an important step in the development of its blowing equipment activities. For a contractor considering a drill driven OFC cable blowing machine today, this history is a starting point for a technical conversation rather than a substitute for checking the proposed product specifications. The right purchasing decision still depends on matching a documented configuration to the cable, duct and operating conditions of the intended project. Fibernet's family business continued into a new generation in 2010, when Matteo, Marta and Ismael joined the company. Its stated ambition is to develop an international presence while maintaining its Italian identity and technical focus. For English speaking customers in Italy and overseas, a clear enquiry helps turn that ambition into a useful commercial discussion. Explain whether you need equipment for a particular contract, repeated installations with similar dimensions or a changing range of cable blowing assignments. Include the destination country and any purchasing requirements that could affect the proposal, such as documentation language, delivery arrangements or the need to confirm local suitability. Availability, shipping terms and delivery timing should be agreed directly rather than assumed. When requesting information about a drill driven fibre optic cable blowing machine, separate essential requirements from preferences. Essential requirements might include compatibility with a specific cable diameter, duct size or available air supply. Preferences might concern transport arrangements, setup workflow or the use of an existing drill, provided that drill is approved for the proposed configuration. This distinction allows the supplier to address genuine constraints first and explain where additional information is needed. Ask for a quotation that identifies the machine configuration and included components clearly, together with any optional items relevant to your installation. It is also sensible to clarify maintenance requirements, replacement wear components and the support arrangements applicable to your purchase. A drill driven optical fibre cable blowing machine can only be evaluated properly when these practical details are considered alongside its operating specifications. If several teams will use the equipment, describe how their projects differ so that compatibility is checked against actual use cases rather than a single ideal example. Explore www.fibernetsrl.com to learn about Fibernet's cable blowing equipment and contact the company with your project details. A focused discussion can help establish what is suitable, what needs verification and what information should appear in your equipment proposal before you commit to an order.

Still looking for information about drill driven OFC cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information