Cable blowing machines · Made in Italy

Looking for "drill driven fibre optic cable jetting machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose drill-driven jetting equipment around your installation conditions

Selecting a drill driven fibre optic cable jetting machine starts with understanding the cable, the duct and the route rather than comparing headline installation distances. Telecommunications contractors working on Italian sites need equipment that suits the actual dimensions and handling limits of their materials. Cable diameter, duct internal diameter, cable stiffness and the condition of the installed route all influence how smoothly a cable advances. Before discussing a machine, gather the cable manufacturer's handling recommendations, the duct specifications and the expected route layout. These details give Fibernet a useful starting point for a technical conversation about suitable equipment and the accessories that may be required. In a typical drill-driven arrangement, the drill provides mechanical drive to a feeding mechanism, while compressed air helps move the cable through a suitably prepared duct. The exact drive connection, permitted drill settings and operating procedure depend on the equipment design. A drill driven fibre optic cable blowing machine should therefore be assessed as part of a complete installation setup, not as an isolated tool. Confirm compatibility with the intended drill, the available air supply, the cable guides and the duct connection before deciding what to purchase. Never assume that an existing drill or compressor is suitable simply because it can connect to the machine. Consider a contractor preparing several short sections with different access conditions. A compact feeding arrangement may make positioning easier, but successful operation still depends on stable support, correct alignment and enough space to handle the cable without sharp bends. At each location, the operator needs a controlled path from the cable reel into the machine and from the machine into the duct. Poor reel positioning can introduce resistance before the cable even reaches the feeding mechanism. Checking these practical details helps distinguish a genuinely suitable setup from one that merely appears convenient in a product photograph. When comparing a drill powered fibre optic cable jetting machine with another configuration, ask how feed speed is controlled, how cable contact pressure is adjusted and what procedure applies if resistance increases. Request the relevant operating limits rather than relying on general descriptions such as lightweight or powerful. Useful purchasing questions also cover machine weight, compatible cable and duct sizes, replacement wear components and the contents of the proposed supply. Fibernet's technical background offers a basis for discussing these requirements with a company established in Italy in 2001. Contact the team with your installation data to explore the available options, clarify configuration details and establish whether the proposed equipment matches the work your crews actually carry out.

Prepare the duct, air supply and feeding system for controlled jetting

Good preparation can make a substantial difference to the performance of a drill driven fibre optic cable jetting machine. Begin with the installed duct rather than the machine controls. Confirm that the route is continuous, that connections are appropriate for the intended operating conditions and that the duct has been checked using the procedures specified for the installation. Water, debris, damaged sections and poorly assembled joints can interrupt airflow or increase resistance. A machine cannot compensate for every defect in the route, so identifying these issues before introducing the cable helps avoid unnecessary handling and repeated setup work. The air supply deserves equally careful attention. Compressor suitability depends on both pressure and delivered airflow, together with the requirements of the machine and the duct arrangement. A pressure reading alone does not establish whether the system can support the intended operation. Hoses, couplings, filtration and any specified air treatment also affect the setup. When assessing a compressed air fibre optic cable jetting machine, ask for the manufacturer's requirements and compare them with the compressor's actual output under working conditions. Use only appropriately rated components, and follow the documented isolation and depressurisation procedure before opening any pressurised connection. Cable preparation is another essential part of the process. Inspect the accessible cable for damage, arrange the reel so it can pay out freely and respect the manufacturer's minimum bend radius. Position guides to avoid abrupt changes of direction at the machine entrance. If a lubricant is proposed, verify that it is compatible with the cable sheath, duct material and equipment, and apply it only as directed. The objective is not simply to increase speed, but to establish a controlled feed that avoids unnecessary stress. Any unexpected change in resistance should prompt a measured response in accordance with the operating instructions, rather than an automatic increase in pushing force. A cable jetting machine for fiber optic cable installation must also fit the way the crew coordinates work. Establish who controls the drill, who monitors the reel and how personnel communicate when the route requires observation at another access point. Keep hands, clothing and loose objects clear of moving feeding components. Check that the machine is supported as instructed and that the working area allows access to the relevant controls. These practical arrangements are particularly important where repeated setups occur throughout the day. For a useful discussion with Fibernet, provide the cable dimensions, duct dimensions, route length, known bends and available compressor information. Include details of any previous installation difficulty without assuming the machine alone caused it. This allows the equipment conversation to focus on the complete jetting arrangement. It also helps your purchasing and site teams agree on what must be verified before deployment, reducing avoidable uncertainty when the equipment arrives on site.

Assess purchase value with an Italian equipment partner

The value of a drill driven fibre optic cable jetting machine extends beyond its initial purchase cost. For a contractor planning repeat installations, the more useful question is whether the selected configuration can support the expected workload with manageable setup, maintenance and consumable requirements. Start by describing the types of cable and duct your teams encounter most often. Then consider how frequently those combinations change, how equipment moves between sites and which components operators may need to replace during normal use. A clear specification makes quotations easier to compare and reduces the risk of ordering an incomplete arrangement. When requesting a fibre optic cable jetting machine price, ask what the quotation includes. The machine, cable guides, duct adapters, seals, transport packaging and other accessories may need separate confirmation. Establish whether a drill or compressor forms part of the offer rather than assuming either is included. Ask about documentation, warranty terms, maintenance requirements and the availability of replacement parts for the proposed model. Prices become meaningful only when the scope of supply and operating requirements are understood. An apparently lower figure may represent a different configuration, so comparisons should be based on equivalent requirements rather than a headline amount. A used fibre optic cable jetting machine introduces another set of checks. Previous operating conditions, wear on feeding components, the state of sealing surfaces and the availability of the correct accessories can all affect its suitability. Documentation matters as much as appearance: an operator needs reliable instructions and confirmed operating limits. Where second-hand equipment is being considered, request an appropriate inspection and verify the exact model and configuration before making assumptions about compatibility. These are general purchasing considerations, not an indication that Fibernet currently offers used machines or any particular stock item. Fibernet brings a family-led Italian business background to this equipment discussion. Founded in 2001, the company draws on the technical experience of its founder, Giancarlo Trinei, whose work with fibre optic installations began in the early 1980s. In 2010, Matteo, Marta and Ismael joined the business as part of its generational development. The launch of the company's first cable blowing machine, Lady, in 2021 marked a specific milestone in its work on equipment intended to simplify installation tasks. This history provides context for the company's focus without replacing the need to verify the specifications of any proposed machine. For contractors in Italy and English-speaking purchasing teams elsewhere, the next step is a focused enquiry through www.fibernetsrl.com. Describe your application, destination and preferred timescale, and request confirmation of the suitable configuration, commercial terms and delivery arrangements. If Italian manufacture is a procurement requirement, ask for the relevant product origin information for the model under consideration. A precise enquiry gives Fibernet the opportunity to address your actual needs and helps your team make a documented equipment decision.

Still looking for information about drill driven fibre optic cable jetting machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information