Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Selecting a drill driven fibre optic cable blowing machine starts with the installation you need to complete, rather than a headline speed or an assumed maximum distance. Contractors working on Italian sites need equipment that suits the actual cable diameter, duct dimensions, route geometry and available compressed air supply. The same considerations apply to international teams assessing Italian equipment for their own projects. A drill provides mechanical drive in this equipment category, while compressed air assists cable movement through the duct. These functions must work together without exceeding the limits specified for the machine, cable or duct. Before choosing a configuration, prepare the cable manufacturer's installation guidance, the duct's internal and external diameters, and an outline of the route. Include bends, changes in level, intermediate access points and any uncertainty about duct condition. This information gives a supplier a practical basis for assessing suitability instead of recommending equipment from incomplete measurements. Equally important is the relationship between the drive mechanism and the cable surface. An appropriate contact arrangement should advance the cable reliably while respecting its permissible pushing force and avoiding excessive compression. Ask how the proposed machine accommodates your cable dimensions, what adjustment is required, and which components are included for the intended duct size. Do not assume that a drill driven optical fibre cable blowing machine accepts every drill, cable or duct combination. Drill compatibility, operating settings and the connection arrangement should all be confirmed against the relevant machine documentation. Air requirements deserve the same attention: pressure alone does not describe whether a compressor can support the task, because available airflow and losses through the supply arrangement also matter. A compressed air fibre optic cable blowing machine should therefore be assessed as part of a complete working arrangement, including the compressor, hoses, connectors and seals. Fibernet provides a direct point of contact for companies wishing to discuss these requirements and understand which documented equipment characteristics are relevant to their work. Share whether your crews handle repeated short sections, longer continuous routes or sites with restricted working space. Explain how equipment reaches the work area and whether frequent changes between cable sizes are expected. Such details help frame useful questions about handling, preparation and configuration changes. The aim is not to promise a universal blowing distance, but to establish a realistic fit between equipment and application. A considered selection gives purchasing teams a clearer specification and gives site supervisors a better foundation for planning each installation safely and consistently.
A successful blowing operation depends as much on preparation as on the machine itself. Before positioning equipment, the installation team should establish that the duct is suitable for the intended cable and that its condition has been checked using an appropriate procedure. Obstructions, damaged joints, contamination and leaks can interrupt progress or make an otherwise suitable equipment choice ineffective. Route information should be available to the operator, including the receiving location and any intermediate points requiring coordination. Establish clear communication between everyone involved before starting, and follow the relevant site safety arrangements for pressurised equipment and moving cable. When preparing a drill driven fibre optic cable blowing machine, use the manufacturer's instructions to select and fit the components intended for the cable and duct combination. Check that the machine is secured as specified, that the cable enters in proper alignment and that the supply reel can turn without creating unnecessary resistance. A poorly positioned reel or an awkward entry angle can introduce problems that additional drive force will not solve. Confirm the condition of seals and cable contact surfaces, and inspect the air connections before pressurisation. Adjustments should follow the documented procedure rather than improvised settings based on a previous job with different materials. Teams considering a drill powered fibre optic cable blowing machine should also verify the drill requirements and operating method before taking the equipment to site. Where a cordless drill is permitted, battery availability is a planning consideration, but it does not remove the need to establish the machine's compressed air requirements. During operation, monitor cable movement and respond to unusual resistance, slipping or a sudden change in progress according to the equipment guidance. Increasing force without investigating the cause can expose the cable to unnecessary stress. Stop and assess the situation whenever operating conditions fall outside the approved limits. No equipment description can replace the cable manufacturer's restrictions or the machine's specific safety instructions. For procurement teams comparing a cable blowing machine for fiber optic cable installation, these operational details are valuable questions to raise with Fibernet before ordering. Ask which checks operators should complete, what routine care is required and which replacement components should be considered for your anticipated workload. Keep a record of cable and duct dimensions, route conditions, settings permitted by the documentation and the outcome of each operation. Over time, these records help supervisors distinguish preparation issues from equipment limitations and improve planning for similar sections. The practical objective is repeatable, controlled work supported by appropriate equipment, realistic expectations and a crew that understands the operating procedure.
Buying blowing equipment is a technical purchasing decision, not simply a comparison of initial quotations. A useful specification explains what your crews install today, what applications are likely to follow and which supporting equipment is already available. It should also identify the documentation your organisation needs before approving a purchase. For companies investigating a drill driven fibre optic cable blowing machine, this approach helps separate essential requirements from features that may not improve their particular workflow. Fibernet was founded in 2001 and draws on the technical background of its founder, Giancarlo Trinei, whose experience with early installations in Italy dates to the 1980s. The company introduced its first cable blowing machine, Lady, in 2021. These milestones provide context for a discussion with the business, but they do not replace checking the specifications of the particular machine being proposed. Buyers should ask for confirmation of the relevant cable and duct ranges, the drive arrangement, compressed air requirements and supplied components. They should also establish which accessories are optional and whether any separate items must be sourced before the equipment can be used. When evaluating fibre optic cable blowing machine price, compare quotations on an equivalent basis. A lower initial figure may represent a different configuration, fewer size adapters or a scope that excludes items essential to your application. Request a clear breakdown rather than assuming that two offers cover the same operational requirements. Consider routine consumables, replacement wear components, maintenance instructions and the practical process for obtaining assistance. These factors affect how readily a machine can remain available when a crew has scheduled work. If a used fibre optic cable blowing machine is part of your comparison, assess its condition, completeness and available documentation with the same care. Previous ownership does not establish that the equipment is suitable for your cable or that its safety provisions remain intact. International purchasers should also clarify the commercial and delivery arrangements relevant to their destination, including packaging, transport responsibilities and any documentation needed locally. Companies buying for use in Italy should similarly confirm delivery details and the information required by their procurement procedures. Fibernet's family business developed further when Matteo, Marta and Ismael joined in 2010, bringing another generation into the company. For a prospective customer, the useful next step is a focused technical enquiry rather than a general request for the cheapest machine. Send cable and duct measurements, typical route details, available compressor information and the intended working environment through www.fibernetsrl.com. Ask for a proposal whose scope and suitability are explicitly stated. That creates a clearer basis for purchasing equipment and preparing the first installation.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.