Cable blowing machines · Made in Italy

Looking for "drill driven fibre cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the work your crew actually performs

Choosing a drill driven fibre cable blowing machine starts with understanding the cable, the duct and the conditions your installation crew will face. For telecommunications contractors working on Italian projects, these details can vary considerably between an accessible roadside chamber and a restricted installation position. Before selecting equipment, establish the cable’s external diameter, the duct’s internal and external dimensions, the intended route length and the number of bends or intermediate access points. These measurements provide a useful basis for discussing machine compatibility with Fibernet, rather than relying on a headline installation distance that may not reflect your site. A drill provides the mechanical drive in this category of equipment, while compressed air helps carry the cable through a suitable duct. However, the exact arrangement, operating limits and required accessories must be checked against the documentation for the proposed model. The drill does not replace the need to assess the compressed air supply. Available airflow, pressure limits, hose connections and air quality all need to match the requirements of the installation system. Equally important is the way the machine guides and grips the cable. Suitable drive components should move the specified cable without applying excessive compression or allowing uncontrolled slip. Ask how the equipment accommodates different cable dimensions, which interchangeable components are required and what checks the operator must perform before starting. When comparing a drill driven fibre optic cable blowing machine with another proposed solution, focus on documented compatibility and practical handling rather than terminology alone. Preparation remains essential whichever machine is selected. The duct should be checked using an appropriate procedure, connections should be secure, and the cable drum should be positioned to allow controlled payout without unnecessary resistance. Any lubricant must be suitable for the cable and duct materials and used according to the relevant instructions. During installation, the operator should monitor cable movement and respond to unusual resistance instead of simply increasing the drive input. A sensible equipment enquiry therefore includes more than a product name: photographs of the working area, cable and duct specifications, compressor information and expected daily workloads can help clarify the requirement. Fibernet’s technical background offers a starting point for that conversation. Founded in Italy in 2001, the company introduced its first cable blowing machine, Lady, in 2021. Contact the team to discuss your application, identify the information needed for equipment selection and request confirmation of the proposed configuration. This approach helps your purchasing team and site crew work towards the same objective: equipment that is appropriate for the intended cable blowing task, with clear operating requirements before it reaches the installation site.

Assess the complete cable blowing setup, not just the purchase price

A useful equipment budget begins with a clear distinction between the machine itself and everything needed to put it to work. When assessing a drill driven fibre cable blowing machine, ask for a quotation that identifies the proposed configuration, included components and any application specific accessories. A low initial figure is difficult to evaluate if the required cable guides, duct connections or other essential items are not specified. The same applies to the drill and compressed air equipment: establish whether these are included, supplied separately or expected to be provided by your company. Compatibility should be confirmed rather than assumed from equipment already available in the workshop. For a contractor moving between sites, preparation time and configuration changes can influence the value of a purchase. Consider how often crews change cable sizes, whether different duct dimensions appear within the same contract and how the equipment will be transported between access points. Ask which adjustments are permitted, which parts are needed for each application and how the operator verifies correct assembly. These questions make a fibre cable blowing machine price enquiry more meaningful because they connect expenditure with the work your business intends to perform. Consumables and maintenance also deserve attention before an order is placed. Request information about inspection intervals, cleaning procedures, components subject to wear and the recommended stock of replacement items. Establish which tasks your team can carry out using the supplied instructions and when technical assistance is required. Keeping suitable spares available may reduce avoidable delays, but the appropriate selection depends on the machine and the intensity of use. Avoid assuming that every component requires the same replacement schedule. Site performance should be considered with similar care. Installation distance and speed depend on cable characteristics, duct condition, route geometry, air supply and operating practice, so a quotation should not be interpreted as a guarantee of identical results on every route. If your procurement process includes an equipment comparison, provide each supplier with the same application details and request clearly stated assumptions. For projects in Italy, specify the delivery destination, required documentation and intended operating environment. For orders shipped elsewhere, clarify packaging, delivery terms and any destination specific requirements before confirming the purchase. Fibernet can be approached with a structured brief covering these points, allowing the discussion to focus on an appropriate cable blowing setup rather than an isolated price. Include your expected workload and any existing equipment you intend to retain. A well defined enquiry helps establish what is being offered, what remains to be supplied and which technical questions still need answering before your company commits to the investment.

Italian technical roots and a practical route to your equipment enquiry

Fibernet’s approach to cable blowing equipment is rooted in the technical experience of its founder, Giancarlo Trinei. His work with optical fibre began in the early 1980s, during the first stages of deployment in Italy, and included involvement in the installation and testing of early submarine cable links for the Italian telecommunications ministry. He founded Fibernet in 2001, bringing that practical background into a business built around technical problem solving. For a contractor considering a drill driven fibre cable blowing machine, this history provides context for the company’s development; the purchasing decision should still rest on the documented suitability of the equipment for the intended task. The business began a generational transition in 2010, with Matteo, Marta and Ismael joining the company. That development maintained the family foundations while supporting a wider ambition to serve customers internationally. In 2021, Fibernet launched Lady, its first cable blowing machine. These milestones explain the company’s progression without implying that every product shares the same drive system, capacity or application range. If you are interested in a drill powered fibre cable blowing machine, ask the team to confirm which available configuration addresses your requirements and request the relevant technical information before specifying it for a contract. A productive initial enquiry can describe a typical working day rather than simply naming a preferred machine category. Explain whether your crew completes several shorter sections or concentrates on longer continuous runs, how equipment reaches the access point and what compressed air supply is available. Include details of the cable drum arrangement and any restrictions on working space. Where installation conditions vary, provide representative examples so that the discussion does not depend on a single unusually straightforward route. Your enquiry should also identify who will operate and maintain the equipment. A purchasing manager may need commercial clarity, while a site supervisor needs accessible operating instructions and a clear understanding of setup checks. Bringing both perspectives into the conversation helps avoid an order that looks suitable administratively but leaves practical questions unresolved. For customers outside Italy, delivery planning should be addressed alongside the technical specification. Request confirmation of shipping arrangements, supplied documentation, applicable warranty terms and the process for obtaining replacement components or technical assistance. These details should be agreed for the actual destination rather than assumed from a general international enquiry. Through www.fibernetsrl.com, businesses can introduce their cable blowing requirements and request further information from Fibernet. Provide the cable and duct dimensions, available air supply, intended installation conditions and delivery location. With those essentials established, the next step is a focused discussion about equipment suitability, configuration and quotation, grounded in the work your installation team needs to complete.

Still looking for information about drill driven fibre cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information