Cable blowing machines · Made in Italy

Looking for "drill driven fibre cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the installation

Choosing a drill driven fibre cable blower starts with understanding the cable, the duct and the conditions in which your team will work. A machine should be assessed against the actual installation rather than selected on a headline distance or an attractive purchase price alone. For telecommunications contractors working in Italy, this means considering both the planned route and the practical constraints at the cable entry point. Access space, drum positioning, duct condition and the available compressed air supply all influence how a blowing operation should be organised. Fibernet provides a direct point of contact for discussing these requirements and identifying which equipment information you need before making a purchasing decision. When evaluating a drill powered fibre cable blower, establish the outside diameter and construction of the cable, the internal and external dimensions of the duct, and any limits specified by their respective manufacturers. These details help determine whether a proposed configuration deserves further technical assessment. Drill compatibility also needs checking: the drive interface, operating requirements and permitted settings must come from the documentation for the particular machine. A familiar drill is not automatically suitable simply because it can be physically connected. Equally, compressed air requirements should be confirmed for the intended configuration rather than inferred from another installation. The relationship between airflow, pressure, cable friction and route geometry makes preparation essential. Duct continuity, cleanliness and sealing should be checked using procedures appropriate to the installation. Sharp bends, damaged sections and poorly assembled connections can undermine progress even when the blowing equipment has been correctly selected. A cable blower for fibre optic cable belongs within this wider preparation process, not outside it. Ask how the cable enters the machine, how contact surfaces are selected for its diameter and how the operator should respond if forward movement becomes irregular. The cable manufacturer's limits remain relevant throughout, particularly where mechanical feeding could place excessive stress on the cable. Before contacting Fibernet, prepare a short technical brief containing cable and duct dimensions, approximate route length, known bends, access arrangements and available equipment. Photographs or drawings can make unusual site restrictions easier to explain. Request confirmation of model suitability, supplied components, required accessories and the documents available for operators. This approach gives your purchasing team something more useful than a generic product comparison: a clearly defined equipment requirement. It also helps site supervisors plan the first installation with fewer unanswered questions. Whether your business undertakes occasional cable blowing work or manages several crews, selecting equipment against a realistic job profile creates a stronger basis for discussing capability, cost and day-to-day operation with Fibernet.

Plan a controlled blowing operation from setup to completion

On a cable blowing job, consistent results begin before the drive is engaged. Position the equipment so the cable can approach the entry point without unnecessary bending, rubbing or changes in direction. Arrange the drum to allow controlled payout, and keep the working area clear enough for the operator to see and manage the feed. A drill driven fibre cable blower should only be assembled and operated according to the instructions for its specific model, with suitable guarding and the specified connections in place. These practical steps matter because a well-chosen machine cannot compensate for a poorly arranged cable supply or an unsuitable duct connection. Start by agreeing responsibilities within the crew. The person controlling the machine needs reliable communication with anyone supervising the drum or monitoring the receiving end. Establish how the team will signal a pause, an unexpected obstruction or completion of the run. Before introducing compressed air, verify the suitability of hoses, couplings and other pressure-bearing components, and follow the applicable isolation and depressurisation procedures. Never loosen a pressurised connection to investigate a suspected problem. Check that the cable guidance and feeding components are appropriate for the cable being installed, using the manufacturer's prescribed adjustment method rather than excessive tightening. For anyone comparing a drill driven fibre optic cable blowing machine with another configuration, these operating details are useful purchasing questions. Ask what preparation is required, which adjustments are permitted and what routine checks the operator must perform. During the installation, watch for changes in cable movement, irregular payout or signs that resistance is increasing. Respond according to the machine instructions and the cable limits instead of simply increasing drive effort or air pressure. A stalled cable requires investigation, not an assumption that more force will solve the problem. Route geometry, duct integrity, sealing and air delivery can each affect the outcome. Keeping a job record helps turn these observations into practical knowledge for subsequent work. Record the equipment configuration, cable and duct dimensions, approximate installed length, relevant settings and any interruptions. Avoid treating one successful run as proof that every similar route will perform identically. For procurement teams reviewing a drill powered fibre optic cable blower, maintainability deserves equal attention alongside initial operating convenience. Clarify cleaning requirements, inspection intervals, replacement contact components and the correct storage procedure. Ask Fibernet which documentation and spare parts information accompany the proposed machine, and confirm the contents of the quotation before ordering. A structured approach to setup, monitoring and care supports more predictable site organisation. It also makes it easier to identify whether a difficulty originates in the machine configuration, the cable supply, the compressed air system or the duct route, allowing the crew to investigate methodically rather than make repeated uncontrolled adjustments.

Discuss your equipment requirements with Fibernet

An equipment enquiry becomes more valuable when it connects technical requirements with the realities of purchasing and deployment. If you are sourcing a drill driven fibre cable blower, Fibernet's background offers a useful starting point for that conversation. Founded in 2001, the company draws on the technical experience of its founder, Giancarlo Trinei, whose work with fibre optic installations began in Italy in the early 1980s. His involvement in early installation and testing activities helped shape a practical approach to developing equipment for people working in the field. In 2021, Fibernet launched its first cable blowing machine, Lady, marking an important stage in the company's development of cable installation products. These milestones describe the business behind the enquiry; the suitability of any particular machine still needs to be established from its current technical documentation and your intended application. The company also retains a family foundation. Matteo, Marta and Ismael joined the business during the generational transition that began in 2010, combining continuity with ambitions for international growth. For purchasing teams, the practical next step is to translate that background into specific questions about equipment, documentation and commercial terms. Rather than requesting a fibre cable blower price without context, explain what your crews need to install and which items you already have. Identify whether the quotation should cover the machine alone or also any compatible accessories, cable guidance components, duct connection parts and other items necessary for the proposed configuration. Ask which elements are included and which must be purchased separately. This makes comparisons more meaningful and reduces the risk of overlooking a component needed before the first job. Consider ownership costs as well as the initial figure. Replacement wear components, maintenance requirements, transport arrangements and equipment availability can all influence purchasing decisions. When comparing a fibre optic cable blower price, check that competing quotations describe equivalent scopes rather than assuming that similarly named packages contain the same equipment. For customers outside Italy, confirm delivery availability, destination-specific documentation, transport charges and any import responsibilities directly with Fibernet. Manufacturing origin, dispatch timing and warranty terms should likewise be verified for the quoted product rather than assumed from the company's location. If several crews will use the equipment, describe their typical workloads and ask how to identify the correct configuration consistently across purchases. A clear enquiry can also distinguish immediate requirements from accessories that may be useful for future cable sizes or duct arrangements. Explore Fibernet's website to introduce your project and request a discussion based on the relevant technical details. The aim is a documented purchasing decision: equipment assessed for its intended task, a quotation with a defined scope and a practical understanding of what your team needs before beginning cable blowing work.

Still looking for information about drill driven fibre cable blower?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information