Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre blowing machine starts with understanding the installation rather than selecting equipment by its appearance or headline specifications. Contractors need to match the machine to the cable diameter, duct dimensions, route characteristics and available compressed air supply. These factors work together: a cable that passes easily through a straight test section may behave differently when the route includes bends, joints or changes in elevation. Before discussing equipment with Fibernet, prepare the cable manufacturer's technical information, the internal and external duct diameters, and an outline of the intended route. This gives the discussion a practical foundation and helps identify questions that must be resolved before equipment is selected or a site trial is arranged. A drill driven fibre cable blowing machine combines a mechanically driven feeding arrangement with compressed air introduced into the duct. The drill provides drive input, while the airflow helps move the cable through the installation path. Successful operation depends on the balance between these functions, not simply on increasing pushing force. Excessive mechanical pressure can damage a cable, and additional air pressure cannot compensate for an unsuitable or obstructed duct. Operators should therefore follow the instructions for the specific machine, cable and duct, including any limits on speed, pushing force and operating pressure. Drill compatibility must also be checked rather than assumed, taking account of the connection arrangement and the manufacturer's requirements. On site, preparation should include inspecting the duct entry, checking connections, confirming that the route is ready for blowing and positioning the cable drum so that the cable pays off without unnecessary resistance. Appropriate duct preparation and compatible lubrication, where specified, can help manage friction. The compressor deserves equal attention: its usable airflow at the required pressure matters more than a nominal pressure figure alone. Hoses, fittings and air treatment requirements should be reviewed as part of the complete arrangement. When comparing a drill powered fibre blowing machine with other equipment, consider how the entire setup will function in the actual working area, including access, safe positioning and the space needed to manage the cable. Fibernet provides a point of contact for companies assessing cable blowing equipment for projects in Italy and international markets. Share the intended application and ask for confirmation of the relevant configuration, operating requirements and supplied accessories. A useful enquiry also explains whether the crew will repeat similar installations or move between substantially different cable and duct combinations. That distinction helps focus the discussion on configuration changes, preparation time and the practical suitability of the proposed equipment, without relying on unsupported promises about installation distance or output.
A drill driven fibre blowing machine becomes most useful when it forms part of a controlled site process. For contractors carrying out repeated cable blowing operations, consistency begins before the equipment reaches the duct entry. Record the cable and duct details for each job, identify the planned blowing direction, and check whether access points allow the equipment and cable drum to be positioned safely. Where route information is incomplete, clarify the uncertainty before attempting the installation. An unexpected restriction, poorly aligned connector or damaged duct section can interrupt progress regardless of the machine selected. Establishing a clear preparation checklist helps crews distinguish an equipment issue from a problem elsewhere in the installation path. At the setup stage, use the correct guides, seals and other application-specific components identified in the equipment documentation. Components that do not match the cable or duct can compromise feeding, sealing or cable protection. Check the drill connection and secure the equipment according to the manufacturer's instructions. Before admitting compressed air, verify that fittings are suitable for the intended operating conditions and that the work area is controlled. Compressed air introduces hazards, so personnel must understand the relevant isolation and depressurisation procedures. Never loosen a pressurised connection to investigate a suspected blockage. During operation, the aim is controlled cable movement rather than maximum speed at every moment. Observe how the cable enters the machine, maintain an orderly drum payout, and watch for changes that suggest increasing resistance. If progress becomes irregular, stop and investigate using the prescribed procedure instead of applying progressively greater force. Cable handling limits remain important throughout the process, including bend radius and any manufacturer-specified restrictions on mechanical loading. A drill driven fibre optic cable blowing machine should be assessed for how clearly its operating procedure supports these tasks, with attention to setup, adjustment and safe stopping. Useful records include the equipment configuration, cable and duct combination, route conditions, compressor arrangement and any interruptions encountered. Such information gives supervisors a stronger basis for reviewing an installation than a distance figure without context. It can also make subsequent discussions with the equipment supplier more precise. When requesting information about a drill powered fibre cable blowing machine from Fibernet, describe the practical difficulties your crews face, such as restricted access or frequent changes between duct sizes. Ask which configuration is appropriate and which adjustments or accessories would be required. Before returning equipment to storage, carry out the specified cleaning and inspection routine, paying particular attention to components exposed to dirt or wear. A documented handover between crews can then flag missing items, maintenance needs and application limitations before the next job starts.
Buying a drill driven fibre blowing machine is a technical purchasing decision as well as a commercial one. A useful quotation should make clear what is included, what must be supplied separately and which application assumptions underpin the proposal. Start by giving Fibernet the cable and duct dimensions, expected route conditions and details of the compressed air equipment available to your crews. If the machine will be used across several types of installation, explain the range rather than describing only the easiest example. Ask for written confirmation of compatibility and operating requirements, particularly where your existing drill, compressor or accessories are expected to form part of the setup. This approach makes a fibre blowing machine price meaningful because the comparison concerns a defined working configuration rather than an isolated machine cost. Depending on the proposed arrangement, relevant purchasing questions may concern guides, seals, duct connections, replacement wear components and transport protection. Do not assume that every accessory shown in an image is included. Equally, establish which documents accompany the equipment, what maintenance is required and how to obtain technical assistance. For an international purchase, request confirmation of delivery options, destination requirements and the applicable commercial terms. Availability, dispatch arrangements and any manufacturing-origin claims should be verified for the specific product being quoted. Fibernet's background offers context for this conversation. Founded in 2001, the company draws on the technical experience of Giancarlo Trinei, whose work with optical fibre began in Italy during the early 1980s. The family business entered a new phase in 2010 with the involvement of Matteo, Marta and Ismael, and launched its first cable blowing machine, Lady, in 2021. These milestones describe the company's development, but the suitability of any proposed machine still needs to be established against your installation requirements. A practical supplier discussion should connect that experience to concrete answers about the equipment you intend to use. When reviewing a drill driven optical fibre cable blowing machine, ask how the proposed configuration accommodates your cable and duct combination and what changes would be needed for another application. Consider the time and consumables associated with those changes, not just the initial purchase. Contractors can also benefit from agreeing a straightforward enquiry process for replacement parts, including the product identification and component details the supplier will need. Before approving an order, bring the technical and purchasing teams together to review the same specification. Confirm the included items, required external equipment, documentation and unresolved questions in one place. This reduces avoidable misunderstandings and gives the site team a clearer starting point when preparing its first installation with the selected equipment.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.