Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven fibre blower starts with the work your installation team needs to complete, rather than a headline speed or an assumed blowing distance. Contractors working on Italian sites face different combinations of duct dimensions, cable construction, route geometry and access restrictions. Each factor influences how equipment should be selected and prepared. A useful enquiry therefore begins with the cable outside diameter, the duct internal and external diameters, the planned route length and any known changes in direction. These details give Fibernet a practical starting point for discussing your application without treating every installation as identical. In this equipment category, a drill provides the mechanical drive that feeds the cable, while compressed air supports its progress through the duct. The relationship between pushing force and airflow matters: increasing drill speed alone is not a reliable answer when resistance rises. Cable limits, duct condition and the operating instructions for the selected machine must guide the process. Before specifying a drill driven fibre cable blower, ask which cable and duct combinations it accommodates, which drill characteristics are required and what air supply is needed. Request confirmation of the complete configuration, including any guides, seals or adaptors needed for your dimensions. Compatibility should be established from documented specifications, not inferred from photographs or a general product description. The same care applies to site preparation. A duct containing debris, standing water, damaged sections or poorly sealed connections can undermine an otherwise suitable equipment choice. Establish a preparation procedure appropriate to the duct system and check the route before feeding the cable. Position the cable drum so that the cable pays off smoothly, without twisting or sharp changes in direction at the machine entrance. Keep the operating area organised so the installer can observe feeding behaviour and stop promptly if conditions change. A drill powered fibre blower may be attractive where teams want a drill-based drive arrangement, but the complete installation still needs an appropriate compressor, suitable connections and a safe working method. Portability should therefore be assessed across the whole setup rather than the blower alone. Fibernet welcomes enquiries grounded in these operational details. Share your intended cable, duct and site conditions through the company website and ask for advice on equipment suitability. For purchasing teams, this approach creates a clearer comparison between the machine being considered and the job it must perform. For site supervisors, it helps identify missing information before equipment arrives on location. The result is a better-informed selection process, with realistic expectations and fewer assumptions about what a particular configuration can achieve.
A productive cable blowing operation depends on a sequence of checks that operators can repeat without overlooking the conditions of the individual route. Start by reviewing the installation plan and identifying the intended feed direction, access points and arrangements at the receiving end. Confirm that the duct is continuous, correctly connected and suitable for the proposed blowing operation. Where preparation or integrity testing is required, follow the procedures and limits specified for the duct system. Do not use additional pressure or mechanical force to compensate for an unresolved obstruction. When preparing a drill driven fibre blower, verify that the selected guides and sealing components match the cable and duct dimensions. Incorrectly matched parts can cause air leakage, poor guidance or unnecessary contact with the cable sheath. Check the machine, drill and air connections in accordance with their respective instructions before beginning. Secure the equipment as specified, organise hoses to avoid creating trip hazards and establish clear communication between everyone involved. Compressed air presents hazards, so pressure must be isolated and released safely before connections are opened or adjustments are made. Eye protection and any other required protective equipment should follow the site risk assessment and equipment documentation. During feeding, the operator should monitor cable movement and respond to changes rather than pursuing a fixed speed regardless of resistance. An abrupt slowdown may indicate an issue with the route, drum payout, sealing arrangement or cable guidance. Stop and investigate in accordance with the operating procedure instead of repeatedly forcing the cable forward. A drill driven fibre optic cable blower should be assessed for how its documented operating controls fit your team's working method. Ask Fibernet to explain the relevant setup requirements for any proposed model, including the information operators need before starting and the checks required between jobs. Avoid assuming that all machines in this category use identical drive arrangements or protective features. Record useful installation information after each run: cable and duct dimensions, route characteristics, equipment configuration and any interruptions. These records can support future planning, but previous results should not be treated as guaranteed distances on another route. Even apparently similar ducts may differ in cleanliness, joint quality or bending severity. Routine care also deserves a place in the workflow. Inspect contact surfaces and consumable components, clean the equipment as instructed and replace worn parts according to the manufacturer's guidance. When discussing a drill powered fibre cable blower, ask which maintenance tasks belong to the operator and which require technical assistance. A practical buying decision considers these everyday responsibilities alongside initial performance expectations. For contractors managing several crews, consistent preparation, documented checks and clear stop procedures provide a more dependable foundation than relying on operator improvisation.
For a contractor purchasing cable blowing equipment, the quotation should clarify what is included, what must be supplied separately and which application details still require confirmation. The cost of a drill driven fibre blower cannot be evaluated meaningfully without understanding its proposed configuration. A machine supplied for one cable and duct combination may require different accessories for another. Likewise, the drill, compressed air supply, hoses and connections should not be assumed to form part of the same offer. Ask for an itemised proposal that identifies the equipment, applicable accessories and any recommended spare or consumable parts. When comparing fibre blower price, consider how the proposed package fits the work you actually undertake. A lower initial figure may not represent the most appropriate purchase if essential items are missing or compatibility remains unresolved. Conversely, specifying unnecessary accessories can increase expenditure without improving the installation process. Provide Fibernet with representative job requirements and distinguish between your immediate needs and possible future applications. This gives the discussion a useful commercial focus while keeping technical suitability at the centre. Fibernet was founded in 2001, drawing on the experience of Giancarlo Trinei, whose work with fibre installations in Italy began in the early 1980s. That technical background later contributed to the company's development of cable blowing equipment, including the launch of its first machine, Lady, in 2021. The involvement of the next generation from 2010 marked a further stage in the family company's growth. For buyers, this history offers context for the business behind the equipment; the suitability of any particular model must still be confirmed against its specifications and your application. Customers in Italy and international contractors can use an English-language enquiry to explain their requirements clearly. Include the destination country, expected purchasing timescale and the dimensions relevant to the installation. Request confirmation of availability, delivery arrangements, documentation and any applicable commercial terms rather than assuming that these are identical for every destination. If you are considering a drill driven fibre blowing machine for deployment across several teams, ask how to specify consistent configurations and identify replacement parts accurately. Clarify the channels available for technical enquiries and the information needed when requesting assistance. Model identification, component details and a precise description of the issue can make those conversations more effective. Finally, assess the purchase as an operational package: suitable equipment, confirmed compatibility, understandable documentation and a realistic plan for keeping the machine ready for work. Contact Fibernet through its website to begin that discussion and request a proposal based on your cable blowing requirements, rather than a generic assumption about your site.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.