Cable blowing machines · Made in Italy

Looking for "drill driven fiber optic cable jetting machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable jetting equipment to the conditions on site

Choosing a drill driven fiber optic cable jetting machine starts with understanding the installation, rather than selecting equipment by appearance or headline performance alone. For contractors working on Italian street works and telecommunications projects, the useful questions are practical: what cable must be installed, which duct will receive it, how accessible is the entry point, and what equipment can the crew bring to the site? Fibernet provides a point of contact for discussing these requirements against its cable blowing equipment offering. Founded in 2001, the company combines its Italian roots with an ambition to serve installation businesses internationally. Its first cable blowing machine, Lady, was launched in 2021, marking an important step in the development of equipment focused on the needs of installation teams. A drill driven arrangement uses a compatible drill to provide mechanical drive, while the complete jetting process also depends on the machine configuration and the specified air supply. The drill should therefore never be considered a substitute for checking compressor requirements. Before choosing a configuration, establish the cable diameter, duct internal diameter, cable construction and any limits specified by the cable manufacturer. These details influence the suitability of the drive components, guides and seals. They also help determine whether the proposed combination can feed the cable without excessive compression or surface damage. Route information matters just as much. Frequent bends, imperfect joints, contamination and changes in gradient can increase resistance, even where the overall distance appears modest. An installation team comparing a drill powered fiber optic cable jetting machine should ask how the proposed equipment accommodates its actual cable and duct combination, rather than relying on a distance achieved under different conditions. Preparing a useful enquiry does not require an elaborate specification document. A clear description of the route, photographs of the working area, cable data and duct dimensions can establish a productive starting point. Include the drill and compressor details if these are already available, and identify any restrictions on access or working space. For crews moving between several work locations, also consider how the machine will be transported, secured and positioned at the duct entrance. A stable arrangement supports controlled feeding and allows the operator to observe the cable entering the machine. Discussing these points with Fibernet helps keep the equipment conversation connected to real installation tasks. The objective is a suitable working configuration, with clearly understood operating limits, rather than a purchase based on an unsupported promise of universal compatibility or guaranteed installation distance. This approach is particularly valuable when the same crew handles several cable sizes across changing site conditions.

Prepare the duct, control the feed and protect the cable

Reliable cable jetting depends on preparation and operating discipline as well as the equipment selected. Before bringing a drill driven fiber optic cable jetting machine into operation, the crew should confirm that the duct route has been checked using procedures appropriate to the installation. Debris, trapped water, damaged sections and poorly assembled connections can interrupt progress or create conditions that no increase in drive force will resolve safely. Establishing duct continuity and identifying accessible intermediate points gives the operator a clearer basis for planning the work. Any cleaning, testing or lubrication should follow the relevant duct, cable and equipment instructions, including compatibility requirements for consumables. At the entry point, align the machine so that the cable approaches the drive mechanism without an unnecessary bend. The cable drum should be positioned to allow smooth payout, with a suitable arrangement for managing rotation and avoiding sudden changes in tension. Check that the installed guides, drive components and seals correspond to the intended dimensions. Incorrect sizing can cause leakage, poor traction or unwanted pressure on the cable jacket. These checks are equally relevant when assessing a cable blowing machine for fiber optic cable installation, because successful operation depends on the complete setup rather than the machine name alone. Once the equipment is correctly assembled, follow its specified procedure for establishing airflow and introducing mechanical feed. The appropriate sequence and settings must come from the equipment documentation, not from a generic assumption about how every machine operates. Where compressed air is used, both available pressure and delivered airflow deserve attention. Hoses, connectors and restrictions can affect the supply reaching the machine, so compressor selection should consider the complete connection arrangement. A compressed air fiber optic cable jetting machine must also be operated with the prescribed precautions for pressurised equipment, including secure connections and safe isolation before adjustment. During installation, the operator should watch for changes in cable movement, unusual noise, slipping or visible jacket deformation. If progress deteriorates, stop and investigate according to the operating instructions instead of repeatedly increasing force. Possible causes include restricted payout, an obstruction, an unsuitable seal or resistance further along the route. Record the conditions associated with the interruption so that the next decision is based on evidence. A simple job record can include cable and duct sizes, approximate installed length, route characteristics, equipment configuration and the reason for any stoppage. Over successive projects, this information helps crews prepare more consistently and makes technical enquiries more precise. When contacting Fibernet, sharing these observations can support a more focused discussion of equipment suitability and setup requirements. Good preparation cannot remove every site variable, but it can reduce avoidable uncertainty before the cable enters the duct.

Build a purchasing brief around long-term installation needs

A purchasing decision becomes more useful when it reflects the work a contractor expects to carry out over time. An installation business considering a drill driven fiber optic cable jetting machine should start by separating essential requirements from preferences. Essential requirements might include compatibility with specified cable and duct dimensions, a workable arrangement at confined access points and clearly documented operating limits. Preferences might concern transport arrangements, the use of existing compatible tools or the organisation of accessories between jobs. Making this distinction helps a buyer compare proposals fairly and identify where further technical clarification is needed. Fibernet brings a family-led business background to this conversation. Founder Giancarlo Trinei began working with early fibre installations in Italy during the 1980s, and the company was established in 2001. Matteo, Marta and Ismael joined the business during the generational transition that began in 2010. This history provides context for the company's technical focus, but a purchasing decision should still rest on the suitability of the proposed equipment for the customer's actual work. When requesting a fiber optic cable jetting machine price, ask what the quotation includes rather than comparing totals in isolation. The machine configuration, dimensional components, accessories and any separately required equipment can materially change the overall investment. Clarify whether the proposed setup requires a particular drill specification, an external compressor or additional connection hardware. Ask which documentation is supplied and what information is available about routine inspection, replacement parts and maintenance procedures. These questions help distinguish the initial purchase amount from the cost of keeping a crew equipped for repeated installations. For a business considering a used fiber optic cable jetting machine as an alternative, condition and completeness deserve particular attention. Worn drive components, missing guides, damaged seals or uncertain maintenance history can affect usability. Availability of suitable replacement parts should be checked before committing to equipment whose apparent saving depends on assumptions. This is a general purchasing consideration, not a statement that Fibernet offers used machines. Buyers in Italy should also clarify delivery arrangements, applicable documentation and commercial terms within their quotation. International customers can enquire about availability for their destination, shipping arrangements and any local requirements that need to be addressed before an order. Avoid assuming that every configuration is immediately available or approved for every market. A practical enquiry to Fibernet should identify the destination, intended cable sizes, duct dimensions, expected installation conditions and any equipment already owned. With those details in place, the discussion can focus on an appropriate configuration and a clearly defined proposal. The result is a purchasing process grounded in operational needs, transparent scope and realistic expectations rather than a headline specification alone.

Still looking for information about drill driven fiber optic cable jetting machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information