Cable blowing machines · Made in Italy

Looking for "drill driven fiber optic cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match drill-driven cable blowing equipment to your installation

Choosing a drill driven fiber optic cable blowing machine starts with the relationship between the cable, the duct and the equipment that advances the cable. For telecommunications contractors working on Italian installation sites, portability matters, but it should never replace a careful compatibility check. The cable outside diameter, duct internal diameter, cable construction and permitted pushing force all influence whether a proposed configuration is appropriate. A drill-driven arrangement uses rotational power from a compatible drill to operate the mechanical feed, while compressed air supports cable movement through the duct. The drill does not replace the air supply, and the presence of a drill connection does not establish compatibility with every drill, battery or speed setting. These details should be confirmed against the specific machine documentation before equipment is selected. Fibernet gives prospective customers a direct point of contact for discussing cable blowing requirements rather than relying on a product label alone. Founded in 2001, the company draws on the technical background of its founder, Giancarlo Trinei, whose experience with optical cable installations in Italy began in the early 1980s. Its first cable blowing machine, Lady, was launched in 2021. That background provides context for a practical conversation about equipment selection, without assuming that every machine shares the same drive system or operating limits. When assessing a cable blowing machine for fiber optic cable installation, prepare the actual cable and duct specifications, the anticipated route length and the number and severity of bends. Include information about existing duct joints, access points and any restrictions on compressor positioning. These details help identify questions that a catalogue photograph cannot answer. For example, a compact arrangement may be convenient beside a roadside chamber, but the available workspace must still accommodate the cable reel, air connections and safe operator access. Likewise, a lightweight drive arrangement offers little advantage if the compressor cannot deliver the required airflow at the specified working pressure. Before choosing a drill driven fiber cable blowing machine, ask how its feed mechanism is adjusted, which cable contact components are required and how the operator should respond to increasing resistance. Confirm whether the proposed package includes duct fittings, cable guides and the accessories needed for your dimensions. Request the applicable operating instructions and clarify what must be supplied separately. A useful enquiry therefore describes a real installation rather than asking only for a maximum distance. Contact Fibernet through its website with these parameters to discuss the relevant equipment and obtain a quotation based on your project. This approach supports a more informed purchase and reduces avoidable uncertainty before the machine reaches the installation site.

Plan the air supply, feed control and working procedure

Successful cable blowing depends on preparation and controlled operation, not simply on increasing drill speed. Before using a drill driven fiber optic cable blowing machine, the installation team should inspect the route information and verify that the duct is suitable for the intended operation. Duct integrity, cleanliness and correctly assembled joints affect how effectively compressed air can assist cable travel. Any checks, cleaning procedures or proving operations should follow the duct supplier’s recommendations and the machine manufacturer’s instructions. Introducing a cable into an unverified route can turn a manageable obstruction into damaged material, lost working time or an incomplete installation. The compressor deserves the same attention as the mechanical feed. Pressure and airflow are different parameters, and a pressure figure alone does not establish that the air supply is adequate. Hose dimensions, connection restrictions and leakage can all influence the air reaching the equipment. Ask for the air requirements of the specific configuration and assess them alongside the compressor’s documented delivery capability. Air preparation requirements, including moisture or contamination control where specified, should also be clarified before work begins. In a compressed air fiber optic cable blowing machine, the mechanical drive and the airflow perform complementary roles; neither should be treated as a substitute for a properly prepared duct. At the entry point, cable reel positioning should allow smooth payout without unnecessary drag or sharp changes in direction. The operator needs a clear view of the feed area and a practical way to stop the operation in accordance with the equipment instructions. Cable guidance and contact pressure must suit the cable construction, because excessive compression or pushing force can damage a cable even when its outer surface initially appears intact. Use only the adjustments and protective features documented for the selected machine, and do not assume that a drill clutch alone provides adequate cable protection. For a drill powered fiber optic cable blowing machine, confirm the permitted drill characteristics, attachment method and operating range before connecting the drive. During installation, changes in feed behaviour should prompt assessment rather than an automatic increase in force. An unexpected slowdown may relate to reel resistance, a duct restriction, insufficient airflow or route geometry. Record the conditions and investigate using the approved procedure, with the system safely stopped and depressurised whenever intervention requires it. Never disconnect pressurised components or place hands near moving feed parts. When contacting Fibernet, describe the working environment as well as the cable dimensions: roadside access, confined positioning and the distance between compressor and machine can affect the suitability of a proposed setup. Asking these questions before purchasing a drill driven fiber optic cable blowing machine helps connect equipment selection with a realistic site procedure, supporting consistent preparation across successive jobs without promising an installation distance that conditions cannot guarantee.

Assess purchase value with an Italian cable blowing specialist

An equipment quotation becomes useful when it explains what your team will receive and how that configuration relates to the work ahead. When evaluating a drill driven fiber optic cable blowing machine, compare the complete proposed package rather than the machine price in isolation. A lower initial figure may exclude cable guides, duct adapters, transport arrangements or other components needed for your actual cable and duct dimensions. Conversely, a package containing accessories that your team will not use may not represent the best allocation of your budget. Provide Fibernet with representative installation specifications and ask for the scope of supply to be itemised clearly, including any equipment that must be sourced separately. A meaningful assessment of fiber optic cable blowing machine price also considers ownership beyond the first installation. Ask which parts require routine inspection, how wearing components are identified and what maintenance the operating documentation specifies. Clarify the availability and ordering process for replacement components, together with any relevant warranty terms. These are questions to resolve with the supplier, not benefits to assume from a product description. If multiple crews will use the equipment, consider how a consistent configuration could simplify accessory selection and reduce the risk of sending an incomplete kit to site. The ability to identify the correct part or adjustment can matter as much as the convenience of carrying the machine. A used fiber optic cable blowing machine requires a different level of verification. Its apparent condition does not establish the state of its feed components, seals or other functional parts. Buyers should examine its identification, documented history, accessory compatibility and availability of operating instructions before comparing it with a new quotation. Any inspection or functional assessment should be performed safely by a competent person. An attractive purchase price cannot compensate for an unsuitable cable range or missing components that prevent the intended job from starting. Fibernet’s development is rooted in Italy and in the Trinei family’s technical and entrepreneurial experience. The generational transition began in 2010, with Matteo, Marta and Ismael joining the business, while the company continued to develop its cable blowing activities. For customers considering Italian-made equipment, the practical next step is to confirm the manufacturing details of the selected product and request information relevant to its destination. Companies purchasing for use outside Italy should also clarify delivery availability, shipping costs, documentation and any destination-specific requirements before placing an order. Use www.fibernetsrl.com to present your cable blowing application and request a project-specific discussion. Include cable and duct sizes, expected operating conditions, the proposed air supply and your intended purchasing timescale. With that information, an enquiry about a drill driven fiber optic cable blowing machine becomes a structured equipment assessment rather than a comparison based on headline claims alone.

Still looking for information about drill driven fiber optic cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information