Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Selecting a drill driven fiber optic cable blower begins with the cable and duct combination your installation team actually uses. A machine that appears suitable in a catalogue still needs to be assessed against cable diameter, duct internal diameter, cable stiffness, route condition and the practical constraints at the launch point. For contractors working on sites across Italy, these details can vary considerably between individual jobs. A useful enquiry therefore starts with measurements rather than an assumed installation distance. Give Fibernet the cable dimensions, duct specifications and available information about bends, gradients and access points so that the discussion addresses your working conditions. The objective is to identify an appropriate equipment configuration, not to promise performance without understanding the route. In a drill driven arrangement, the drill supplies mechanical drive to the feeding mechanism, while compressed air supports cable movement through a suitable duct. The two functions must work together. Increasing the drive force does not automatically overcome a restriction, and increasing air pressure is not a substitute for checking duct integrity. Cable handling limits, equipment ratings and the instructions for the selected configuration remain essential references throughout the operation. When comparing a drill powered fiber optic cable blower with another drive arrangement, ask how feed control, cable guidance and stopping procedures are managed. Confirm the compatible drill requirements rather than assuming that any tool already carried by the crew will be suitable. Coupling design, permitted speed, torque behaviour and the working environment can all affect the choice. Equally, establish which guides, seals and duct connections are required for your dimensions and whether these are included in the proposed supply. A cable blower for fiber optic cable installation should be evaluated as a working system, including its air supply requirements, rather than as an isolated machine. Before requesting a quotation, prepare the compressor specifications available to your team, including the relevant pressure and airflow information. Explain whether crews regularly move between small access chambers, roadside launch positions or more spacious preparation areas. These details help frame questions about positioning, handling and setup without relying on unsupported claims about portability or output. Fibernet was established in Italy in 2001 and introduced its first cable blowing machine, Lady, in 2021. That company background provides a starting point for a technical conversation, while the suitability of any proposed machine must still be confirmed against your application. Contact the team with your installation data to discuss available solutions, clarify the proposed scope of supply and request a quotation based on the equipment and accessories your work requires.
An effective launch point gives the operator a clear view of cable entry, stable equipment positioning and practical access to the controls. Before starting a blowing operation, the crew should examine how the cable will approach the machine and how the duct will be secured. Avoiding awkward entry angles and unnecessary bending helps protect the cable and makes abnormal feeding behaviour easier to recognise. The reel arrangement also matters: the cable must pay off in a controlled way, without creating avoidable resistance upstream of the feeding mechanism. These preparations are relevant whether the job involves a short section with restricted access or a longer route with several changes of direction. A drill driven fiber optic cable blower should only be prepared and operated according to the instructions supplied for its configuration. Check the specified cable guides, sealing elements and duct connections before applying drive or compressed air. A correctly matched seal is important, but tightening or adjusting components beyond the prescribed procedure can create its own problems. Confirm that the duct is suitable for the intended operation and that its condition, connections and route have been assessed. Any duct proving, cleaning or preparation should follow the procedures appropriate to that installation. Compressed air introduces requirements that deserve separate attention. When assessing a compressed air fiber optic cable blower, establish the machine's permitted operating conditions and the air supply characteristics required for the proposed cable and duct pairing. Pressure and airflow describe different aspects of compressor capability; one figure alone does not establish suitability. Air treatment requirements, hose compatibility and connection security should also be checked against the relevant equipment instructions. Never disconnect pressurised components or attempt to clear a suspected obstruction while the system remains energised or pressurised. During feeding, the operator should watch for changes in cable movement, unusual resistance or inconsistent behaviour. If progress becomes irregular, stopping and investigating is more responsible than simply increasing the applied force. Possible causes include reel drag, duct leakage, an unsuitable guide arrangement or a route obstruction, and each requires a different response. A drill driven fiber optic cable jetting machine does not remove the need for competent judgement at the launch point. For repeat work, a simple job record can help crews improve preparation. Record the cable and duct dimensions, route characteristics, equipment configuration, air supply details and any interruptions encountered. These observations support better technical enquiries and more informed planning for comparable installations, without turning one successful run into a universal performance claim. When contacting Fibernet, share recurring difficulties as well as project specifications. Describing what happens on site gives the team a clearer basis for discussing equipment suitability, accessory requirements and questions that should be resolved before an order is placed.
A useful quotation makes it clear what the proposed equipment includes, what remains to be supplied separately and which application details still need confirmation. For a drill driven fiber optic cable blower, the headline machine cost is only one part of that assessment. Contractors should also consider the required cable guides, duct connections, sealing components, compatible drive equipment and compressed air provision. The purpose is not to add unnecessary accessories, but to avoid discovering at the first job that a critical item was outside the original scope. Fibernet's website provides a route to discuss these requirements directly rather than making a purchasing decision from a product name alone. When enquiring about fiber optic cable blower price, include the cable diameter range you expect to handle, the duct sizes used most frequently and the type of installation work your crews undertake. If several teams will share the equipment, explain how often configuration changes are likely and whether the same air supply will be available at each site. Ask for a written description of the proposed configuration, the included components and any optional items relevant to your work. Confirm quotation validity, applicable taxes, delivery arrangements and payment terms with the company before placing an order. These commercial details should be established for your destination and purchase, not assumed from a general website description. Comparing new equipment with a used fiber optic cable blower requires a similarly specific approach. A lower purchase price does not explain the condition of the feeding mechanism, the completeness of the accessory set or the availability of documentation. Buyers considering previously owned equipment should establish its service history, inspect wear components and verify compatibility with their intended cable and duct sizes. Any missing parts, uncertain maintenance history or unresolved operating issues should be considered before judging the overall cost. This is a general purchasing consideration, not an indication that Fibernet supplies second hand machines. Behind Fibernet is a family business founded by Giancarlo Trinei, whose technical experience dates to the early development of fibre optic installations in Italy. The company began its generational transition in 2010 with the involvement of Matteo, Marta and Ismael, preserving its founding values while pursuing further growth. For a contractor, that history is relevant as context for the people behind the equipment; purchasing decisions should still rest on confirmed specifications and a clearly defined offer. Businesses enquiring from outside Italy should provide their delivery destination and ask Fibernet to confirm supply availability, documentation, transport arrangements and any destination specific requirements. Start the conversation through www.fibernetsrl.com with a concise technical brief, and request a proposal that connects the machine configuration to the realities of your cable blowing work.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.