Cable blowing machines · Made in Italy

Looking for "drill driven fiber cable blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose equipment around the cable, duct and working conditions

Choosing a drill driven fiber cable blowing machine starts with the installation you need to complete, rather than an isolated speed figure. Contractors working in Italy and overseas need to understand how the cable, duct, compressed air supply and driving arrangement will work together. A machine that suits one cable and route may require different accessories or settings for another. Fibernet provides a direct point of contact for companies assessing cable blowing equipment, backed by a business founded in 2001 and technical experience extending to the earliest fibre installations in Italy. The practical starting point is a clear description of your application: cable outside diameter, duct internal and external diameters, expected route length, available access points and the conditions under which the team will operate. These details make an equipment enquiry more useful and help avoid assumptions about compatibility. When evaluating a drill driven cable blowing machine, distinguish the role of the drill from that of the compressed air. In this equipment category, the drill supplies mechanical drive while the air helps transport the cable through the duct. Actual operation, compatible drill characteristics and adjustment procedures must follow the instructions for the selected model. Neither drive power nor air pressure alone establishes how far a cable can be installed. Duct cleanliness, leakage, bends, cable stiffness and friction all influence the outcome. Before choosing a cable blowing machine for fiber optic cable installation, ask how its cable contact components, seals and duct connections match the sizes you use most often. Also establish whether changing between those sizes requires replacement parts, adjustment or both. This matters for subcontractors who move between jobs with different cable specifications and cannot afford to discover missing accessories after arriving on site. A useful assessment also considers working space around the access chamber, stable equipment positioning and the ability to feed cable smoothly from the drum. The operator needs a controlled cable path without avoidable twists or sharp changes in direction. Discuss the compressor requirements separately from the machine purchase, because suitable airflow and operating pressure depend on the equipment and application. Request the relevant technical documentation before committing to a configuration, and compare its requirements with the resources already available to your team. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on the founder’s practical approach to engineering. For your own project, the next step is to turn that technical discussion into a defined equipment requirement. Share the dimensions and route information with Fibernet so that the proposed configuration can be assessed against the work your installers actually face, rather than against a generic purchasing checklist.

Prepare the installation to support controlled cable feeding

A successful cable blowing operation depends on preparation as much as equipment selection. Before positioning a drill driven fiber cable blowing machine, the installation team should confirm that the intended duct section is identifiable, accessible and ready for the planned procedure. Check the route records against the actual access points and establish who is responsible for observing the receiving end. Any cleaning, proving or integrity checks should follow the duct supplier’s requirements and the project method statement. Introducing cable into a route with unresolved obstructions or leaking connections can waste working time and expose the cable to unnecessary stress. Preparation should also include checking the cable manufacturer’s installation limits, including permissible bending and mechanical loading. These values belong in the job planning process rather than being inferred from the apparent strength of the cable sheath. Position the drum so that cable can pay off steadily, with sufficient room for the handling arrangement and no unnecessary contact with abrasive surfaces. Keep the machine supported as required by its operating instructions, and arrange hoses and cables so they do not create avoidable hazards around the working area. When using a drill driven fiber blowing machine, the selected drill, its attachment and the operating settings must be compatible with the machine manufacturer’s guidance. Do not assume that a more powerful drill automatically improves installation performance. Controlled feeding and the correct contact pressure are more important than forcing progress through resistance. Compressed air introduces additional considerations. The team should verify hose condition, coupling security and the suitability of the air supply before pressurising the system. Follow the specified depressurisation procedure before opening connections, changing components or investigating a problem. If progress changes unexpectedly, stop and investigate according to the operating instructions instead of compensating immediately with greater force. Potential causes can include a change in the route, an air leak, inconsistent cable payout or an unsuitable adjustment. A drill powered fiber cable blowing machine should be evaluated as part of this complete working arrangement, not as a substitute for route preparation or competent operation. For contractors managing repeated installations, a simple job record can make subsequent planning more reliable. Record the cable and duct dimensions, route characteristics, equipment configuration, relevant operating observations and any interruptions. Comparing similar jobs can reveal whether recurring delays relate to preparation, accessories, air supply or handling. Avoid using a single successful installation as a guaranteed distance for every future route. Conditions vary, even where nominal cable and duct sizes appear identical. When discussing equipment with Fibernet, describe those practical constraints and recurring difficulties. This gives the technical conversation a useful focus: selecting and operating a suitable configuration for the jobs your team carries out, while keeping expectations tied to documented requirements and real site conditions.

Build a clear quotation for Italian and international projects

Purchasing a drill driven fiber cable blowing machine is easier to manage when the quotation clearly separates the equipment configuration from the assumptions surrounding its use. Start by explaining whether your business handles occasional installations, recurring subcontract work or several teams operating on different projects. The same purchasing question can lead to different accessory priorities depending on how often cable and duct sizes change. A contractor working mainly with one combination may value a straightforward dedicated arrangement, while another may need to discuss several compatible size combinations before deciding what to order. When comparing fiber cable blowing machine price, examine what is included rather than treating every headline amount as equivalent. Ask for the precise model identification, the supplied cable and duct components, any necessary optional accessories and the documentation accompanying the equipment. Establish separately whether the drill, compressor and connecting equipment are included or must be sourced independently. These details should be confirmed in the quotation, not assumed from a photograph or a general category description. It is also sensible to discuss routine inspection, cleaning requirements and the availability of replacement wear components. Understanding how to identify the correct replacement part can reduce uncertainty when equipment needs attention during a busy installation schedule. Fibernet’s background provides context for this purchasing conversation. Founded by Giancarlo Trinei in 2001, the company draws on experience developed through early fibre installation and testing work in Italy during the 1980s. A generational transition began in 2010 with Matteo, Marta and Ismael joining the business, preserving its family foundations while supporting further development. The introduction of Lady in 2021 marked the launch of Fibernet’s first cable blowing machine. These milestones explain the company’s technical roots without replacing the need to verify the specifications of the equipment proposed for your application. For an international enquiry, provide the delivery destination alongside your technical requirements. Ask Fibernet to confirm shipping arrangements, estimated availability, applicable commercial terms and the documents relevant to your destination. Buyers arranging collection through their own carrier should also establish packaging dimensions and handling requirements before booking transport. Companies purchasing for use in Italy should similarly confirm the documentation and contractual details relevant to their procurement process. A drill driven fibre cable blowing machine enquiry becomes more productive when it includes the intended cable sizes, duct sizes, available air supply and typical route conditions from the outset. If some information is not yet available, identify the gaps rather than replacing them with estimates presented as facts. Contact Fibernet through its website to discuss your installation requirements and request a clearly scoped quotation. The objective is a purchase decision based on compatibility, a complete understanding of the supplied configuration and practical preparation for the work ahead.

Still looking for information about drill driven fiber cable blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information