Cable blowing machines · Made in Italy

Looking for "drill driven fiber blowing machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your cable blowing equipment to the job

Choosing a drill driven fiber blowing machine starts with the conditions your installation team actually encounters, rather than a headline speed or distance. Cable diameter, duct internal diameter, route geometry and available compressed air all influence the suitability of the equipment. For telecommunications contractors working on Italian sites, these conditions can change between adjacent sections of the same project. A straight, recently installed duct presents a different challenge from a route containing several bends, intermediate joints or changes in elevation. Before requesting a recommendation, prepare the cable datasheet, duct dimensions and an outline of the intended route. These details give Fibernet a practical basis for discussing your application without relying on assumptions about performance. A drill driven fiber cable blowing machine should be assessed as part of a complete installation arrangement, not as an isolated purchase. In this category, a drill supplies mechanical drive while compressed air helps move the cable along the duct. Successful operation depends on balancing that mechanical assistance with the airflow, cable characteristics and resistance within the route. Increasing drive force is not a substitute for investigating an obstruction, a leaking connection or an unsuitable cable and duct combination. Excessive force can damage the cable, particularly when progress stops but the feeding mechanism continues to apply pressure. Your assessment should therefore include how feeding is controlled, how the cable is supported and which protective functions are documented for the proposed equipment. Ask which cable guides, duct connections and sealing components are required for your intended dimensions, and establish whether they are included or supplied separately. Equally important is the compatibility of the drill itself: connection type, operating mode, torque management and permitted speed must follow the machine manufacturer's instructions. Do not assume that any drill available in the van is suitable. Battery availability, safe positioning and access to the controls also affect everyday usability. When comparing a drill powered fiber blowing machine with another configuration, consider the entire working setup, including the compressor, hoses, cable reel arrangement and space needed around the insertion point. A compact feeding unit does not remove the need for adequate compressed air or a properly prepared duct. Fibernet launched its first cable blowing machine, Lady, in 2021, building on a technical background developed over decades. Contact the company with your installation details to establish which current machine configuration, drive arrangement and accessories are appropriate. This approach helps purchasing teams obtain a meaningful proposal and gives site supervisors a clearer understanding of what must be ready before work begins. It also keeps the discussion focused on your actual cable blowing requirements instead of unsupported promises about universal compatibility or guaranteed installation distances.

Prepare the route and control the cable feed

Reliable cable blowing begins before the machine is connected. Inspect the intended duct section using procedures agreed for the project, and confirm that the route is continuous, suitably prepared and ready for the selected cable. Open ends, defective joints, water or debris can undermine an otherwise appropriate equipment choice. Establish how the receiving end will be monitored and ensure that everyone involved understands the start, stop and emergency communication arrangements. Where work takes place beside roads in Italy, position the equipment within the authorised working area and follow the applicable site safety arrangements. A drill driven fiber blowing machine belongs in a coordinated installation process, with clear responsibilities for feeding, observation and control. Set up the cable reel so that the cable pays off smoothly without unnecessary twisting or sharp changes of direction. Respect the cable manufacturer's bend radius and handling limits throughout the route from the reel to the machine. Check that guides and feeding components match the cable dimensions, then verify the duct connection and the correct assembly of the specified seals. Any lubricant should be suitable for the cable jacket, duct material and equipment, and used only as directed. A drill driven fiber optic cable blowing machine cannot compensate for poor reel handling or an incorrectly prepared connection. Before introducing compressed air, follow the equipment instructions for inspections, protective equipment and the safe positioning of personnel. Pressurised components must never be opened until the system has been isolated and safely depressurised. During feeding, monitor progress rather than treating the operation as an unattended task. Changes in cable movement, unusual noise, visible slipping or rising resistance are reasons to assess the situation. Stop according to the prescribed procedure when conditions suggest a problem; repeatedly applying more drive can turn a recoverable obstruction into cable damage. The appropriate operating settings depend on the actual equipment and application, so obtain them from the current technical documentation rather than adopting values from an unrelated installation. Teams evaluating a drill driven cable blowing machine should also discuss how routine checks and cleaning fit into their working day. Worn contact surfaces, damaged seals or contamination can affect consistency and should be addressed using approved procedures and replacement parts. Keep a simple installation record identifying the cable, duct section, route conditions, equipment setup and any interruptions. These notes help supervisors distinguish a recurring equipment issue from a specific route problem and provide useful information when requesting technical advice. At the end of the operation, isolate the equipment, release pressure safely and inspect the components before packing them away. Discussing this complete workflow with Fibernet helps identify the questions that matter before purchase: compatibility, required accessories, operating documentation and maintenance requirements. The objective is a controlled, repeatable working method suited to the site, not an unrealistic promise that every section will behave in the same way.

Build a purchasing decision around documented requirements

A useful equipment quotation should tell you more than the cost of the main machine. For a contractor purchasing a drill driven fiber blowing machine, the real comparison includes the configuration supplied, the accessories needed for planned jobs and the practical arrangements for keeping the equipment available. Start by describing your typical cable and duct dimensions, the nature of your installation work and the equipment your teams already use. Identify whether the purchase is intended for one defined project or for a wider range of contracts. This distinction matters because an apparently economical package may require additional components before it can cover your intended applications. When assessing fiber blowing machine price, request an itemised proposal that separates the machine, dimensional adapters, any specified drive equipment, transport and other applicable charges. Confirm which items are included rather than inferring them from photographs or general product descriptions. Ask for current technical documentation and clarification of the operating limits relevant to your jobs. Installation distance and speed should be discussed in relation to cable properties, duct condition, route geometry and air supply, not treated as unconditional product guarantees. The same discipline applies when comparing a drill powered fiber cable blowing machine with another drive arrangement: compare suitability for the work and the complete setup, rather than the purchase figure alone. Discuss routine maintenance requirements, the availability of replacement wear components and how to request assistance if the machine needs attention. Confirm warranty terms, exclusions and the process for returning equipment where necessary. For buyers outside Italy, establish delivery arrangements, documentation requirements and the responsibilities associated with the destination before placing an order. Ask Fibernet to confirm product origin and any required conformity documents for the particular model and destination; such details should be verified against the equipment being supplied. Fibernet was founded in 2001 and draws on the experience of Giancarlo Trinei, whose work with optical fibre began during the early installations in Italy in the 1980s. That background is relevant to buyers seeking a supplier with a technical understanding of installation challenges. The family business entered a new phase in 2010 with the involvement of Matteo, Marta and Ismael, while the launch of Lady in 2021 marked its entry into cable blowing machines. For your purchasing decision, connect that company history to specific questions about the equipment offered today. Request a discussion based on your application, a clear explanation of the recommended configuration and a written quotation that your purchasing and installation teams can review together. This gives both teams a shared basis for approval: the buyer understands the scope of supply, and the site supervisor understands the conditions required for use. Contact Fibernet through its website to begin that assessment with the dimensions, route information and project requirements already available.

Still looking for information about drill driven fiber blowing machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information