Cable blowing machines · Made in Italy

Looking for "drill driven fiber blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the work it must perform

Choosing a drill driven fiber blower starts with understanding the cable, the duct and the conditions in which your installation team will work. A machine should not be selected on its drive arrangement alone: the relationship between cable diameter, duct internal diameter, available airflow and route geometry determines whether a proposed configuration is suitable. For telecommunications contractors working in Italy, this assessment can involve short urban sections with several changes of direction, longer roadside runs or access points where equipment must be positioned within a restricted working area. Fibernet provides a direct point of contact for discussing these requirements before you commit to equipment. Rather than assuming that one configuration will cover every installation, prepare the cable specification, duct dimensions, expected section lengths and details of your compressed air supply. These give the discussion a practical starting point and help identify the technical information that still needs checking. In a typical drill driven cable blower arrangement, the drill provides mechanical drive while compressed air assists cable movement through the duct. The exact operating method, permissible drill settings and connection requirements depend on the machine, so compatibility must always be confirmed against the relevant documentation. More drill torque is not automatically better: excessive pushing force can damage a cable or cause it to buckle before it enters the duct. Controlled feeding, correct alignment and an appropriate response to increasing resistance matter more than pursuing maximum speed. Likewise, a drill driven fiber optic cable blower must be assessed as part of a complete installation setup, including the compressor, hoses, couplings, seals and cable handling arrangements. Ask which components are included, which are selected for a particular cable size and which must be supplied separately. This prevents a seemingly straightforward purchase from becoming a collection of incompatible parts on site. Operators should also consider how easily they can position the machine, observe cable movement and stop the feed when conditions change. A useful equipment enquiry describes the work rather than requesting a headline performance figure alone. For example, explain whether your team regularly changes between cable sizes, moves between multiple access chambers during a shift or works with duct routes whose condition is uncertain. These details help establish meaningful selection criteria without relying on unsupported promises about distance or speed. By approaching Fibernet with this information, your business can focus the conversation on suitability, preparation and operating requirements. The objective is a cable blowing setup that matches the installation task, with clear boundaries on what must be verified before work begins and a realistic understanding of the supporting equipment required.

Prepare the installation to protect the cable and maintain control

Reliable cable blowing depends on preparation as much as machinery. Before connecting a drill driven fiber blower, establish that the intended duct route is continuous, appropriately prepared and suitable for the cable being installed. Obstructions, water, damaged sections and poorly assembled joints can undermine an otherwise appropriate equipment choice. Follow the duct supplier's procedures for checking and preparing the route, and use only approved methods and materials. Where lubrication is specified, confirm compatibility with both the cable sheath and the duct rather than treating every lubricant as interchangeable. The installation area also needs attention: position the cable drum so that cable can pay off smoothly without excessive tension, sharp changes of direction or contact with abrasive surfaces. Respect the cable manufacturer's minimum bend radius throughout the handling path, not just at the machine inlet. These practical measures reduce avoidable resistance before compressed air and mechanical feed are introduced. When assessing a drill powered fiber blower, ask how the operator controls feeding, what limitations apply to the drive and which procedures govern stopping or restarting. A battery-powered drill does not make the entire cable blowing arrangement independent of other resources; the compressed air requirement still needs to be established for the selected equipment and installation conditions. Compressor pressure and delivered airflow are different parameters, and both require attention. The correct values must come from the applicable machine documentation and project assessment, not from a general assumption about what cable blowing equipment normally needs. Hoses and connections must also be suitable for their intended working conditions. During operation, maintain communication between personnel at the feeding point and any receiving or intermediate access points. Unexpected resistance, irregular cable movement or signs of damage warrant stopping and investigating rather than increasing feed force without diagnosis. Never disconnect pressurised components until the system has been safely isolated and depressurised according to the operating instructions. A drill driven fiber blowing machine should be introduced into an established working procedure that covers equipment inspection, secure positioning, personal protective equipment and responsibility for stopping the operation. Record the cable and duct combination, route characteristics, equipment configuration and relevant operating observations for each job. These records can help teams distinguish recurring route problems from setup issues and make future equipment discussions more precise. They are also more useful than comparing installation distances without context, because bends, duct condition, cable stiffness and airflow can change results substantially. Fibernet can be contacted with these practical requirements when you are evaluating cable blowing equipment. A well-prepared enquiry allows your team to discuss the intended application clearly and ask for the documentation needed to plan safe, controlled work, without assuming that any machine can compensate for an unsuitable or unverified duct route.

Discuss your requirements with an Italian cable blowing equipment company

Behind an equipment enquiry is a business decision: your team needs to understand what it is buying, how it will be configured and what information is available to support its use. Fibernet was founded in 2001, drawing on the technical experience of founder Giancarlo Trinei, whose work with optical fibre began during the early installations in Italy in the 1980s. The company's development led to the launch of its first cable blowing machine, Lady, in 2021. This background gives prospective customers a relevant starting point for discussing cable blowing applications, but it should not replace model-specific checks. If you are considering a drill driven fiber blower, ask Fibernet to confirm which available solution corresponds to your intended drive arrangement, cable dimensions and duct requirements. Do not assume that a product name alone establishes compatibility or that every machine in a range uses the same operating principle. A clear quotation request should describe the installation work and identify the scope of supply you expect. Include the cable sizes you use most frequently, the duct sizes encountered, your existing compressor details and any drill equipment you intend to use. Ask whether the proposed configuration requires interchangeable guides, seals or other size-dependent components, and request an itemised explanation of what is included. When comparing fiber blower price, distinguish the equipment purchase from the complete cost of putting it into service. Additional accessories, compressed air provision, transport, replacement wear components and maintenance arrangements can affect the overall budget. A lower initial figure is not necessarily a better match if essential components are absent or the operating requirements do not suit your sites. Equally, there is little value in paying for a configuration whose capabilities are unrelated to your actual workload. For businesses in Italy and English-speaking customers elsewhere, commercial discussions should also establish delivery arrangements, destination requirements and the documentation supplied with the equipment. Confirm availability, shipping scope and any applicable import responsibilities before finalising an international order. If Italian manufacture is an important procurement criterion, request confirmation of origin for the specific product being quoted rather than extending an assumption across every component. The same careful approach applies to after-sales support: ask how technical enquiries are handled, which spare parts can be ordered and what maintenance instructions accompany the machine. Comparing a drill driven fibre cable blower with another proposed configuration is most productive when both are evaluated against the same documented application. Fibernet's family-led development, including the arrival of Matteo, Marta and Ismael in 2010, provides company context; your purchasing decision should ultimately rest on verified suitability and clear commercial terms. Contact Fibernet through www.fibernetsrl.com with your project details to begin that focused discussion.

Still looking for information about drill driven fiber blower?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information