Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill driven cable jetting machine starts with the cable, the duct and the route rather than an advertised installation distance. For telecommunications contractors working in Italy, the same equipment may encounter short street sections, crowded access chambers and longer routes with several changes of direction. Each situation places different demands on cable guidance, mechanical feeding and compressed air. Before selecting a machine, establish the cable outside diameter, the duct internal diameter, the cable manufacturer's installation limits and the condition of the installed duct. These details provide a practical basis for discussing compatibility with Fibernet and help avoid selecting equipment on assumptions that do not reflect the actual job. In a drill driven arrangement, the drill provides mechanical input to the feeding mechanism, while compressed air supports cable advancement through the duct. The relationship between those functions matters: increasing the drive speed does not automatically improve progress, particularly when friction, leakage or a restricted route is limiting movement. A drill driven cable blowing machine should therefore be assessed as part of a complete installation setup, including the compressor, air hose, couplings, sealing components and cable payout arrangement. Ask which drill characteristics are required, how the drive is connected and which adjustments the operator can make. Do not assume that an existing drill or compressor will be suitable without checking the machine's documentation. On site, preparation should include verifying duct continuity, checking connections and confirming that the route has been cleaned and prepared using an appropriate procedure. The cable drum should allow smooth payout without creating unnecessary resistance before the cable reaches the machine. Suitable alignment at the entry point also helps reduce avoidable bending and rubbing. Where a route includes multiple bends, changes in elevation or intermediate access points, discuss those conditions before choosing an operating approach. A cable jetting machine for fiber optic cable installation cannot compensate for a damaged duct or a cable that is unsuitable for the intended pathway. Fibernet's technical background offers a useful starting point for a requirements discussion focused on the equipment rather than broad promises about performance. Explain whether your team carries out repeated short installations, varied subcontracting work or planned deployment programmes with consistent cable and duct combinations. Provide the available compressor specifications and identify any restrictions on access, transport or working space. With that information, you can request clarification on the relevant machine configuration, the components needed for your application and the checks required before operation. The objective is a properly matched installation setup that supports controlled cable handling and a repeatable working method, with expectations grounded in the conditions your crews will actually encounter.
A useful equipment comparison looks beyond the purchase figure and considers what your installation team will need to complete a working setup. When assessing a drill driven cable jetting machine, request a clear description of the supplied configuration and distinguish included components from optional accessories. Cable guides, duct connections and sealing parts may need to correspond to particular dimensions, so a quotation should be checked against the cable and duct combinations you intend to use. Clarify the required drill interface, the recommended operating limits and the compressed air requirements before assuming that equipment already in your workshop can be reused. These checks make quotations easier to compare and reduce the risk of discovering missing items when a crew is ready to start. Contractors researching fiber optic cable jetting machine price should also account for preparation time, routine inspection, replacement consumables and the practical consequences of changing between installation sizes. A lower initial figure does not necessarily mean a lower cost per completed job if the selected arrangement is poorly suited to the work. Conversely, paying for capabilities that your projects do not require may add unnecessary expense. The appropriate comparison is between documented configurations that address the same operating requirements. Ask how size changes are performed, which parts require inspection and what maintenance information accompanies the machine. For a drill powered cable jetting machine, everyday usability also depends on the positioning of the drill, the stability of the setup and the operator's access to adjustments. Consider how the equipment will be transported from the vehicle to the duct entry point and whether the planned working area allows safe cable payout and hose routing. Restricted pavement space or an awkward chamber approach can affect the arrangement even when the nominal cable dimensions are compatible. These practical details deserve attention before procurement, not after delivery. Operating discipline remains equally important. Start from the documented setup procedure, respect cable installation limits and monitor the relationship between feed and actual cable movement. If advancement slows unexpectedly, investigate the cause rather than automatically increasing the drive input or air supply. A blockage, an unsuitable seal, excessive payout resistance or route friction may require a different response. Only trained, authorised personnel should operate the equipment, following the manufacturer's instructions and applicable site safety requirements. For a tailored enquiry to Fibernet, describe your expected workload, typical route conditions and the sizes you use most frequently. Ask for a quotation that identifies the proposed equipment, compatible accessories and any information still needed to confirm suitability. This gives purchasing teams and site supervisors a common basis for evaluating the proposal, while keeping the decision centred on dependable preparation, appropriate equipment selection and realistic operating costs.
Behind an equipment enquiry there is usually a specific operational question: will this setup suit the cable, duct and working conditions our crews face? Fibernet approaches that conversation with a business history rooted in practical technical experience. Founded in 2001, the company builds on the background of Giancarlo Trinei, whose work with optical cable installations in Italy began in the early 1980s. His experience included installation and testing activities on early submarine cable projects for the country's telecommunications ministry. For customers evaluating cable blowing equipment today, that background is relevant as context for the company's technical foundations, rather than as a substitute for checking the specifications of an individual machine. Fibernet introduced its first cable blowing machine, Lady, in 2021. That milestone forms part of the company's development towards equipment intended to simplify installation work. However, when enquiring about a drill driven cable jetting machine, customers should ask which current configuration matches their requirements rather than infer drive type, cable capacity or performance from a product name. A useful discussion separates the company's manufacturing experience from the verified characteristics of the proposed equipment. Request the applicable technical documentation and check that it addresses the installation sizes and operating conditions you have described. The business also retains a family connection through the generational transition that began in 2010, when Matteo, Marta and Ismael joined the activity. Under Matteo Trinei's leadership, Fibernet's stated ambition is to develop an Italian company with a global presence. For English speaking contractors in Italy and international buyers considering Italian manufactured equipment, direct communication about specifications is especially valuable. If your procurement documents use the term drill driven fibre optic cable blowing machine, make sure the enquiry also includes dimensions and operating requirements, because terminology alone does not establish compatibility. Preparing a concise project brief can make that exchange more productive. Include the cable outside diameter, duct internal diameter, intended route length, relevant bends, compressor details and available drill information. Explain whether the equipment will remain with one installation crew or move between teams using different cable sizes. Where an international shipment is involved, request confirmation of delivery availability, destination requirements, documentation, packing arrangements and the scope of the quotation before placing an order. Do not assume that accessories, local charges or particular delivery services are included unless they are explicitly stated. The same care applies to enquiries for a drill powered fiber optic cable jetting machine: establish what is supplied, what must be sourced separately and which operating instructions apply. Through www.fibernetsrl.com, prospective customers can introduce their installation needs and request a discussion about suitable equipment. A clear technical brief gives Fibernet the information needed to respond meaningfully and helps your team move towards a purchasing decision based on documented suitability rather than general claims.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.