Cable blowing machines · Made in Italy

Looking for "drill driven cable blower"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose cable blowing equipment around the conditions on your site

Choosing a drill driven cable blower starts with understanding the cable and duct combination, rather than comparing machines on a single headline figure. Contractors working on installations in Italy need equipment that suits the actual route, available compressed air and handling conditions at the work area. The cable diameter, duct internal diameter, cable construction and permitted installation forces all influence the selection process. A machine that is appropriate for one combination should not automatically be assumed suitable for another. Fibernet offers a point of contact for businesses evaluating cable blowing equipment, with a technical background rooted in practical installation experience. Before requesting a proposal, prepare the cable datasheet, duct dimensions and an outline of the planned route so that the discussion can focus on a realistic application. A drill driven fiber cable blower uses a drill to provide mechanical drive, while compressed air helps carry the cable through the duct. The relationship between these two contributions matters: increasing the drive effort is not a substitute for resolving restrictions, poor sealing or unsuitable air delivery. Operators should follow the equipment instructions and the cable manufacturer's installation limits throughout the process. Ask which drill characteristics are required, how the drive is connected, which cable and duct sizes are supported, and what accessories are necessary for your configuration. These questions help distinguish an apparently complete machine from a genuinely suitable working arrangement. It is also worth discussing the practical sequence of preparing the cable entry, fitting the duct connection and checking that the cable moves correctly through the drive area. Seals and guiding components must match the intended application; incorrect sizing can compromise air containment or cable guidance. When assessing a cable blower for fiber optic cable installation, consider how easily operators can inspect these components and replace items subject to wear. Accessibility can make a meaningful difference when several installations are scheduled in one day. However, no general description should be treated as a guarantee of distance, speed or compatibility. Route bends, duct cleanliness, temperature, cable stiffness and compressor performance can all affect the outcome. For a useful enquiry, explain whether the work involves short individual sections, repeated routes with similar dimensions or changing combinations across several sites. Include any restrictions on working space and equipment transport. This gives Fibernet a clearer basis for discussing suitable options without relying on assumptions. The objective is not simply to obtain a machine with an attractive specification, but to identify an installation arrangement that operators can prepare correctly, control responsibly and use within the limits of every component involved.

Prepare the duct, air supply and cable feed before blowing

A well prepared installation can prevent many of the interruptions that are otherwise attributed to the blowing machine itself. Before positioning a drill driven cable blower, inspect the working area and establish a stable arrangement for the equipment, cable supply and air connection. The cable should approach the machine without unnecessary bends, rubbing points or uncontrolled movement from the reel. The receiving end also needs appropriate supervision and a communication method agreed between the people involved. These preparations are particularly important where a route passes between separate chambers or work areas and the operator cannot directly observe the cable exit. Duct preparation deserves equal attention. Confirm that the intended route is continuous and that connections are suitable for the pressure involved. Checks for obstruction, leakage or contamination should follow the duct supplier's recommendations and the installation procedure. Do not use additional drive force to compensate for a suspected blockage. If progress changes unexpectedly, stop and investigate rather than assuming that more pressure or higher drill speed will solve the problem. The cable manufacturer's limits and the machine instructions remain the governing references. When planning to use a drill driven cable blowing machine, assess the compressor as part of the complete installation arrangement. Pressure alone does not describe its suitability: available airflow, hose dimensions, connection restrictions and air quality can also affect performance. Ask for the requirements of the particular equipment configuration and verify the compressor's delivery under the relevant operating conditions. Compressed air presents hazards, so isolation, pressure release and secure connections must be handled according to the applicable instructions and site safety arrangements. During setup, check that guiding parts, seals and drive components are appropriate for the cable being installed. Contact pressure should be adjusted only as instructed, avoiding the assumption that a tighter grip always improves installation. Excessive loading can damage a cable even when its outer surface appears acceptable. Equally, an unsuitable grip can allow slipping and make progress inconsistent. A drill driven fibre optic cable blower should therefore be evaluated not only for how it advances the cable, but also for how its setup requirements fit the operator's working procedure. Keeping a simple job record can improve subsequent planning. Record the cable and duct dimensions, route characteristics, equipment configuration and relevant operating observations without presenting one successful installation as a universal performance promise. Such information helps technical discussions become more specific when another route behaves differently. Fibernet can be contacted with these application details when discussing equipment requirements. This practical approach keeps the enquiry focused on cable blowing and helps contractors identify the questions that need answering before equipment reaches the site.

Discuss your cable blowing project with Fibernet

For a contractor selecting equipment across several projects, the purchasing conversation should establish what is included, what must be supplied separately and which technical details still require confirmation. A drill driven cable blower is part of a working arrangement that may also require a suitable drill, compressed air supply, connecting hoses and application specific components. Never assume that every item shown or discussed belongs to the same supply package. Request a clear description of the proposed configuration, its supported dimensions, operating requirements and accompanying documentation. This makes it easier to compare the proposal with the work your installation teams actually undertake. Fibernet was founded in 2001 and draws on the technical experience of its founder, Giancarlo Trinei, whose work with optical fibre began in Italy in the early 1980s. The company's development led to the launch of its first cable blowing machine, Lady, in 2021. These milestones provide context for an equipment enquiry, but the suitability of any current proposal must still be assessed against the intended application. Ask which available machine and accessories meet your stated cable and duct requirements rather than assuming that a product name alone confirms compatibility. Businesses looking for a drill driven fiber optic cable blowing machine can make their enquiry more productive by describing both immediate and anticipated uses. For example, a contractor repeatedly installing the same cable size may prioritise a straightforward, repeatable configuration, while a team handling changing duct dimensions needs clarity about component changes and supported combinations. Neither requirement should be reduced to a general claim that one machine suits every installation. Where several operators will share equipment, clear setup instructions and consistent inspection routines also deserve attention during the selection process. For companies outside Italy, commercial and delivery questions should be addressed alongside the technical discussion. Confirm the destination, documentation requirements, packaging, lead time and availability of the proposed equipment directly with Fibernet. If Italian manufacture is a purchasing requirement, ask for confirmation of the origin of the specific product offered. International delivery arrangements and any destination specific requirements should likewise be confirmed for the individual order rather than assumed from a general website description. After purchase, the ability to identify the correct replacement component matters as much as the initial selection. Ask how to specify seals, guiding parts and other service items for the chosen configuration, and what information should accompany a technical enquiry. Keeping the equipment identification and configuration details accessible can simplify later discussions. Contacting Fibernet through www.fibernetsrl.com allows your business to present its cable blowing requirements and request a focused proposal. The strongest starting point is a concise technical brief supported by cable dimensions, duct data and practical site constraints.

Still looking for information about drill driven cable blower?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information