Cable blowing machines · Made in Italy

Looking for "cable jetting machine"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose jetting equipment around the conditions on your worksite

Choosing a cable jetting machine starts with the cable, the duct and the working conditions, rather than a headline installation speed. Telecommunications contractors need equipment that suits the combinations they actually encounter: different cable diameters, duct internal diameters, route lengths and access arrangements. A machine that is appropriate for one installation may require different accessories or settings for another. Fibernet gives prospective customers a direct point of contact for discussing these requirements and identifying which equipment configuration deserves closer technical assessment. For an informed enquiry, provide the cable manufacturer's specifications, the duct dimensions, the expected route and any restrictions affecting access to the installation point. These details establish a useful starting point without assuming that every underground route behaves in the same way. A compressed air cable jetting machine combines controlled mechanical feeding with airflow through the duct. The feeding mechanism introduces the cable while moving air helps carry it along the route, reducing dependence on pushing force alone. Successful operation nevertheless depends on preparation: a damaged duct, excessive water, poor connections or unsuitable bends can undermine performance regardless of the equipment selected. Before installation, the team should check duct continuity and condition using procedures approved for the project, confirm that connectors are suitable for the intended pressure and ensure that the cable can leave the drum smoothly. Compressor selection also requires attention to both delivered airflow and operating pressure, together with the manufacturer's requirements for air quality. Pressure alone does not describe the available installation capability. When assessing a cable jetting machine for fiber optic cable installation, consider how the cable is guided, how feeding pressure is adjusted and how the operator monitors progress. Excessive force can damage a cable or cause buckling, so the equipment must be used within its documented limits and the cable supplier's recommendations. Clear access to controls and an orderly drum arrangement help the operator respond when resistance changes. For example, an installation with several bends may call for a different operating approach from a straight duct section, even where the cable and duct sizes are identical. Ask Fibernet about compatible cable and duct ranges, the accessories needed for your application and the operating information available for the proposed configuration. Where performance figures are discussed, request the conditions behind them rather than treating them as guaranteed results. This application-led approach helps contractors select equipment on the basis of technical fit, protect the cable during installation and prepare realistic work plans for projects in Italy and international markets.

Understand the quotation beyond the initial equipment cost

A useful equipment quotation should explain what is included, what is optional and which installation requirements the proposed configuration addresses. For contractors comparing cable jetting machine price, the purchase figure is only one part of the decision. Cable guides, duct adapters, sealing components, drive elements and other application-specific parts can affect whether the supplied equipment is ready for the intended job. Ask for an itemised proposal and compare configurations on an equivalent basis. A lower initial figure is not necessarily a saving if essential accessories must be sourced separately or if the proposed machine does not cover the cable sizes used most frequently by your teams. Equally, purchasing capacity that your contracts do not require can tie up capital without improving daily productivity. Begin with a practical account of your workload. Specify typical and occasional cable diameters, duct sizes, installation distances and the number of crews that may need equipment simultaneously. Include the compressor already available, if applicable, so its suitability can be checked rather than assumed. The budget should also account for routine inspection, replacement wear parts, transport arrangements and any additional equipment needed to operate safely. Request information about maintenance tasks, spare-part identification and access to operating documentation. These details help the purchasing team understand the continuing commitment associated with ownership and help site supervisors organise equipment availability. Contractors considering a used cable jetting machine should investigate its condition with the same attention given to its headline price. Check identification details, maintenance records, evidence of wear and whether guards, controls and safety-related components remain complete and functional. Confirm that the documentation and accessories correspond to the actual unit being offered. A functional assessment should follow the manufacturer's procedures and be carried out by a competent person; a short demonstration alone may not reveal every issue. Availability of compatible replacement parts is another important consideration, particularly when an older configuration differs from current equipment. Fibernet can be contacted to discuss its own equipment and clarify the scope of a proposed purchase; do not assume that second-hand stock, trade-in arrangements or inspection services are available unless specifically confirmed. For international enquiries, ask the quotation to distinguish equipment costs from packaging, carriage and any destination-related charges. Agree the delivery terms, documentation requirements and expected lead time before committing to a schedule. Buyers in Italy should likewise clarify the applicable commercial and delivery conditions rather than relying on assumptions. A carefully scoped cable jetting machine quotation supports a more reliable comparison because it connects expenditure to actual operating requirements. The objective is not simply to obtain the lowest number, but to understand what your team will receive and what remains necessary before installation can begin.

Italian technical roots, with a practical focus on installation teams

Fibernet's approach to jetting equipment comes from a technical background that predates the company's foundation in 2001. Founder Giancarlo Trinei began working with fibre optic systems in Italy in the early 1980s and participated in the installation and testing of early submarine cables for the country's telecommunications ministry. That experience provides context for the company's emphasis on practical engineering: equipment must address the conditions faced by the people who operate it, not simply present an attractive specification. In 2021, Fibernet launched its first cable jetting machine, Lady, marking a significant step in the development of its installation equipment. Prospective buyers can use that history as an introduction, while still requesting current technical documentation to assess the model and configuration relevant to their work. The company's family involvement also has a clear chronology. Matteo, Marta and Ismael joined the business as part of the generational transition that began in 2010, supporting a new stage of growth while retaining the founding values. Under CEO Matteo Trinei, the stated ambition is to develop Fibernet into an internationally recognised Italian business. For a contractor, the useful consequence of engaging directly with a manufacturer is the opportunity to ask focused questions about equipment selection, operating requirements and the information needed before purchase. Rather than relying on broad promises, bring a specific installation scenario to the discussion. Describe the cable construction and diameter, duct dimensions, route characteristics, compressor specification and constraints on positioning equipment at the access point. When assessing a fibre optic cable jetting machine, ask which configurations are documented as compatible and whether changes between applications require different guides, seals or other components. Clarify how those parts are identified so that purchasing and site teams use the same references. It is also sensible to discuss handling and transport between worksites, including dimensions, weight and the arrangements needed to protect the equipment in transit. These practical details can influence how easily a crew incorporates a machine into its working day. For a compressed air fibre optic cable jetting machine, the conversation should include air supply requirements and safe connection procedures, not just the feeding mechanism. Operators need the applicable instructions, and employers must plan work around local safety requirements and the conditions of each site. International customers should ask Fibernet to confirm destination availability, delivery arrangements and the documentation supplied with the proposed equipment. Customers operating in Italy can use the same technical enquiry process to establish suitability before placing an order. Explore the company website to learn about Fibernet and submit a project-specific request. A clear enquiry creates the basis for a meaningful technical response and a quotation tied to the installation work you actually need to perform.

Still looking for information about cable jetting machine?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information