Cable blowing machines · Made in Italy

Looking for "cable jetting machine rental"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Choose equipment around the cable, duct and working conditions

A cable jetting machine rental enquiry should begin with the installation requirements rather than the hire period alone. For contractors working on Italian sites, the useful starting point is a clear description of the cable, the duct and the route. Cable outside diameter, duct internal diameter, cable construction and the manufacturer’s permitted pushing force all influence equipment selection. Route length matters, but it does not tell the whole story: changes in direction, elevation differences, duct joints and the condition of the installed pathway can affect resistance throughout the operation. Sharing these details with Fibernet helps establish a technically meaningful discussion before any commercial arrangement is considered. Founded in 2001, Fibernet draws on the technical experience of its founder, Giancarlo Trinei, whose work with optical fibre in Italy began in the early 1980s. The company introduced its first cable blowing machine, Lady, in 2021, bringing that practical background into the development of installation equipment. When assessing a cable jetting machine for fiber optic cable installation, the objective is to match the equipment to the application without assuming that one configuration suits every job. Ask which cable and duct sizes a proposed configuration accepts, which guides and seals it requires, and how its drive mechanism should be adjusted for the specified cable. Incorrect contact pressure can compromise cable handling, while unsuitable seals can reduce the effectiveness of the air supply. Compressor suitability also deserves attention: available pressure and airflow must be assessed together, following the equipment documentation and the requirements of the installation. Air preparation, hose compatibility and connection arrangements should be clarified before equipment reaches the worksite. A practical enquiry should therefore include photographs or drawings of the access point, the available working space and any restrictions affecting machine positioning. For example, a roadside installation with limited space may require a different preparation plan from a route served by a spacious access chamber. Neither situation justifies predicting an installation distance without assessing the actual conditions. Contractors comparing fiber optic cable jetting machine rental options should also ask how suitability will be confirmed and which technical information must accompany the request. Fibernet can be contacted to discuss the application and establish what equipment or commercial options may be available; rental availability, configurations and terms should always be confirmed directly. This approach keeps the decision grounded in the work that needs doing. It also helps purchasing staff and installation supervisors use the same specification, reducing the risk of requesting equipment that fits the budget but does not match the cable, duct or operational constraints.

Build a realistic hire budget before the equipment reaches site

The financial value of cable jetting machine rental depends on more than a daily or weekly rate. A useful comparison considers the complete period during which equipment is needed, including delivery, site preparation, installation, possible interruptions and return arrangements. Before requesting a quotation, separate confirmed working days from contingency days and explain whether the programme includes several locations. Moving equipment between sites can introduce handling time and transport costs that are easily overlooked when a decision is based only on the headline hire charge. Ask whether the proposed arrangement includes the specific cable guides, duct connections, seals and other accessories required for your application. An apparently suitable machine may not be ready for the intended installation unless the correct configuration accompanies it. Compressor provision should be addressed separately unless its inclusion is explicitly confirmed. The same applies to compatible hoses, air preparation equipment, consumables and any assistance requested for initial setup. A written quotation should make these boundaries clear rather than leaving the installation team to discover them on arrival. Businesses comparing a cable jetting machine price with a temporary equipment arrangement should calculate costs over a realistic workload. Ownership may become attractive when suitable projects occur regularly, but acquisition also brings responsibilities for inspection, maintenance, storage and configuration management. Temporary access may be worth investigating when demand is intermittent or when a particular contract requires a configuration outside the contractor’s usual work. Neither route is automatically more economical: utilisation, scheduling certainty and operational responsibility determine the stronger case. Another possible comparison is a used cable jetting machine, although its condition and completeness require careful examination. Buyers should request maintenance information, identify worn components and confirm that essential accessories and documentation are present. A lower purchase figure is not necessarily a lower project cost if additional parts or corrective work are needed before deployment. For any hire proposal, clarify responsibility for damage, cleaning, replacement consumables and delayed return, together with any deposit or insurance requirements. Ask how an equipment fault would be reported and what response, if any, is included in the agreement. These are questions to settle with the provider, not services to assume. For projects outside Italy, transport documentation, destination requirements and the timing of the return journey can materially affect the calculation. Confirm geographical availability and logistics directly with Fibernet before committing to a programme. A precise enquiry gives the team a better basis for discussing feasible options without implying that every destination or hire duration can be accommodated. The strongest budget is therefore a documented operating plan, connecting equipment specification, commercial terms and the actual installation schedule.

Prepare the worksite for controlled blowing and a clear handover

Once an appropriate equipment arrangement has been confirmed, preparation becomes central to a productive cable jetting machine rental period. The installation team should receive the applicable operating documentation before work begins and identify who is responsible for setup, operation and communication along the route. A machine should only be operated by personnel who understand its controls, limitations and safety requirements. Compressed air introduces hazards that must be addressed through the site risk assessment, including secure connections, controlled isolation and the release of stored pressure before disconnection. Local working arrangements in Italy should also account for access restrictions, traffic management where relevant and coordination with other contractors occupying the same work area. None of these measures replaces the manufacturer’s instructions or the responsibilities of the site supervisor. Before introducing the cable, check the duct using suitable procedures agreed for the project. Obstructions, contamination, damaged sections or unsuitable connections can undermine an otherwise well prepared operation. Confirm that the cable drum is positioned to allow controlled payout and that the entry path avoids unnecessarily tight bends. The machine should stand securely, with enough room for the operator to reach the controls and observe cable entry without adopting an unsafe position. Select guides and seals according to the confirmed cable and duct dimensions, then verify the setup against the equipment documentation. A fibre optic cable jetting machine must be treated as one part of a coordinated installation process, not as a remedy for an unsuitable duct route. During operation, monitor the parameters made available by the equipment and remain alert to changes in cable movement or resistance. Do not respond to a slowdown simply by increasing pressure or pushing force: stop and investigate within the documented operating procedure, respecting both cable and equipment limits. Record relevant conditions so that the team can distinguish a configuration issue from a route problem. Useful records may include the installed section, cable and duct identification, observed operating values, interruptions and the reason for any stoppage. These notes support consistent working practices when the equipment moves to another section or another operator takes over. Contractors exploring fibre optic cable jetting machine rental should also plan the end of the assignment before the first installation begins. Check which cleaning and inspection steps are required, retain the supplied accessories together and document the condition of the equipment at handover. Report any irregular behaviour rather than passing it unnoticed to the next user. Fibernet’s family led development, including the arrival of Matteo, Marta and Ismael in the business from 2010, provides context for a company built around technical continuity and practical problem solving. For your project, translate that discussion into specific questions about configuration, documentation and available arrangements. Clear preparation and a documented handover help protect both the installation programme and the equipment entrusted to the team.

Still looking for information about cable jetting machine rental?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information