Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a cable blower for fibre optic cable starts with the cable, the duct and the conditions your installation team will encounter, rather than with a headline speed. Telecommunications contractors working in Italy need equipment that suits their actual installation programme, whether that involves short sections between access points or longer routes with several changes of direction. Before discussing a machine, gather the cable outside diameter, duct internal diameter, planned section lengths and any available information about bends, couplings and elevation changes. These details provide a practical basis for assessing compatibility. A cable that fits inside a duct is not automatically suitable for an efficient blowing operation: the available clearance, cable stiffness, duct condition and airflow all influence how the installation behaves. A fibre optic cable blower combines controlled mechanical feeding with air travelling through the duct, helping the cable advance while limiting the need for pulling from the far end. The balance between feeding force and airflow matters because excessive pushing can damage the cable or cause it to buckle near the entry point. Likewise, increasing air pressure without understanding the route does not necessarily resolve resistance further along the duct. Operators should work within the limits specified for the machine, cable, duct and associated accessories, using the applicable operating instructions as their reference. Preparation is therefore part of equipment selection, not an optional step after purchase. Check whether the intended compressed air supply can provide the required flow at the specified operating pressure, and establish whether suitable air treatment is necessary for the proposed equipment. Confirm that cable guides, seals and gripping components are appropriate for the intended diameters, rather than assuming one configuration covers every job. When assessing a compressed air fibre optic cable blower, also consider the practical arrangement around the access chamber: stable machine positioning, controlled drum payout, clear communication and safe hose routing can make a significant difference to daily work. Ask how the equipment is adjusted between cable sizes and which consumable components should be available on site. Fibernet introduced its first cable blowing machine, Lady, in 2021, building on the technical background behind the company. For a meaningful equipment discussion, share your project details and request confirmation of the relevant machine configuration. This approach helps your team distinguish between general suitability and a properly assessed application. It also gives purchasing staff a clearer basis for comparing proposals, because the discussion centres on operating requirements, included components and documented limits instead of unsupported promises about installation distance or speed. The result is a more informed decision for the people responsible for delivering the work.
The purchase cost of a cable blower for fibre optic cable is only one part of its value to an installation business. A useful assessment considers how the equipment will be transported, configured, operated and maintained across the jobs your team expects to complete. Start by separating essential requirements from occasional preferences. Cable and duct compatibility, the available power source, compressed air requirements and access conditions belong in the first group. Features that are helpful on a particular contract may be less important across the rest of your workload. When comparing a fibre optic cable blower price, request a clear description of what the quotation includes. Depending on the proposed configuration, cable guides, sealing components, hoses, connections or other accessories may need separate confirmation. Ask which items are required to make the machine ready for your intended application and which are optional. A lower initial figure is not directly comparable with a more complete proposal unless both cover the same working requirements. Maintenance also deserves attention before an order is placed. Establish the recommended inspection routine, the cleaning requirements and the replacement process for components subject to wear. Dust, moisture and debris around a worksite can affect machine operation, so operators need a practical routine based on the manufacturer's instructions. Check gripping surfaces and sealing components as specified, and avoid using damaged parts simply to finish a section. Keeping a record of settings, cable dimensions, duct conditions and the results of each installation can help crews prepare similar jobs more effectively. Such records should support judgement rather than encourage the automatic reuse of settings on a different route. For businesses comparing ownership with fibre optic cable blower rental, expected utilisation is a useful starting point. Regular projects may justify having equipment available under your own maintenance procedures, whereas an occasional requirement may lead you to investigate temporary access from an appropriate provider. Availability, configuration, transport and responsibility for wear must all be checked; rental availability should never be assumed from a manufacturer's product information. Fibernet can be approached about its machines and the requirements of your planned purchase without presuming that every commercial arrangement is offered. During the equipment discussion, describe who will operate the machine and how frequently cable sizes are likely to change. Ask for the relevant operating documentation and clarification of any application limits. For contractors managing several crews, a consistent preparation checklist can help reduce avoidable differences between teams. The objective is not simply to buy a machine, but to establish a workable equipment package that supports controlled installation, realistic scheduling and informed cost management over time.
Behind a cable blower for fibre optic cable, the manufacturer's technical background matters most when it helps customers ask better questions and make informed choices. Fibernet was founded in 2001 by Giancarlo Trinei, whose experience in fibre optic work began in Italy during the early 1980s. That background provides context for the company's development, while the introduction of Lady in 2021 marks its first cable blowing machine. For a contractor evaluating equipment today, however, company history should accompany practical product assessment rather than replace it. The important conversation concerns your cables, ducts, working conditions and the machine configuration proposed for those requirements. Fibernet's family business entered a generational transition in 2010 with the involvement of Matteo, Marta and Ismael. Its ambition to develop an international presence is relevant to English-speaking businesses seeking dialogue with an Italian supplier, including contractors operating in Italy. Clear technical communication is particularly valuable when a purchasing team and an installation crew evaluate the same equipment from different perspectives. Procurement staff may focus on the quotation, delivery arrangements and documentation, while operators need to understand setup, adjustment and routine care. Bringing those questions together before ordering helps avoid misunderstandings about the equipment supplied. If your team is considering an electric fibre optic cable blower, clarify exactly which functions are electrically powered and whether compressed air is still required for the installation process. Drive power and the air used to move cable through a duct are different aspects of machine operation. Similarly, when investigating a battery powered fibre optic cable blower, ask about the specified battery arrangement, operating conditions and compatibility with the intended application rather than assuming that battery operation removes every external requirement. These are equipment selection questions, not claims that a particular Fibernet model offers either configuration. A useful enquiry should describe the intended country of use, cable and duct dimensions, typical route characteristics and available worksite resources. Where possible, include the relevant cable and duct documentation so that compatibility questions can be addressed accurately. For an international purchase, request confirmation of destination availability, shipping arrangements, supplied documentation and any applicable import responsibilities before committing to a schedule. Do not assume that a delivery date or local compliance requirement is covered until it has been explicitly agreed. Businesses working in Italy should likewise explain any site-specific procurement or documentation requirements at the start. By approaching Fibernet with a defined installation brief, your team can seek a proposal grounded in the work it needs to perform. This keeps the discussion focused on suitable equipment, clear responsibilities and the practical information required to evaluate a purchase confidently.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.